You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Passive Wireless Corrosion-Monitoring Tags

    SBC: ENGENIUSMICRO LLC            Topic: A12aT001

    EngeniusMicro and the Georgia Institute of Technology propose a passive wireless sensor platform for the monitoring of corrosion on aircraft and for stored aircraft components. Multiple volumes, chambers, and compartments within aircraft are susceptible to corrosion damage because they are exposed to moisture, they trap heat, and they are difficult to inspect. Placing passive wireless corrosion se ...

    STTR Phase II 2014 Department of DefenseArmy
  2. High Performance Electric-Field Sensor Based on Enhanced Electro-Optic Polymer Refilled Slot Photonic Crystal Waveguides

    SBC: OMEGA OPTICS, INC.            Topic: AF11BT01

    ABSTRACT: This Phase II STTR research proposal aims to demonstrate an antenna coupled phase modulator based on an Electro-optic (EO) polymer refilled slot photonic crystal waveguide (PCW) for operation in the Q band. The goal is to detect field strengths of 100uW/m^2 in an Intensity Modulation Direct Detection (IMDD) scheme using subwavelength antennas. The EO polymer is the SEO125 provided by Dr ...

    STTR Phase II 2014 Department of DefenseAir Force
  3. Real Time 3-D Modeling and Immersive Visualization for Enhanced Soldier Situation Awareness

    SBC: Carnegie Robotics LLC            Topic: A12aT003

    We propose a rapid mapping and 3-D visualization system especially suited for inside buildings, tunnels, urban canyons, and other environments where GPS may be poor or not available. The system--which was fully demonstrated in our Phase I effort-- includes mobile Sensor Nodes that wirelessly supply compressed 3D range data and color imagery to a central Fusion Node. The Fusion Node runs 3D recon ...

    STTR Phase II 2014 Department of DefenseArmy
  4. Scale up of EO polymers and their utilization in novel nano-imprinted sub-wavelength waveguide-based Modulators and Arrays

    SBC: TIPD LLC            Topic: AF11BT01

    ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

    STTR Phase II 2014 Department of DefenseAir Force
  5. High Power WDM Based Upon Mode Coupling

    SBC: ADVALUE PHOTONICS INC            Topic: AF13AT03

    ABSTRACT: AdValue Photonics and University of Arizona propose to demonstrate the capability of fabricating wavelength division multiplexers (WDM) for high-power fiber laser applications. It is based on AdValue Photonics"unique fused fiber technology using large-mode-area (LMA) fibers. Both polarization-maintaining (PM) and non-PM LMA fiber WDMs will be fabricated. By the end of Phase I, two proto ...

    STTR Phase I 2014 Department of DefenseAir Force
  6. Use of Micro Plasma Based Transistors for the Development of Compact High Frequency Power Supplies

    SBC: LYNNTECH INC.            Topic: AF13AT07

    ABSTRACT: Pulsed power systems are utilized in several application platforms ranging from fuel reforming to biomedical applications. While significant advances have been made in development of solid state technology based power systems, the need for faster pulse rates as well as higher voltage requirements have resulted in a need for developing novel pulse power sources capable of pulsing at freq ...

    STTR Phase I 2014 Department of DefenseAir Force
  7. Physical Sub-Model Development for Turbulence Combustion Closure

    SBC: COMBUSTION RESEARCH & FLOW TECHNOLOGY INC            Topic: AF13AT12

    ABSTRACT: The innovation proposed is a computationally-tractable, physics-based, portable turbulent combustion modeling strategy for application to a wide range of Air Force aero-propulsive systems, including augmentors, liquid rockets and scramjets. This modeling strategy will be implemented within an Application Programming Interface (API) library suitable for easy integration within Air Force ...

    STTR Phase I 2014 Department of DefenseAir Force
  8. Compressive Sampling Applied to Millimeter-wave Single Detector Imagers

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: A14AT003

    Millimeter and terahertz wave imaging can image objects behind or within other objects. However, current equipment that does this quickly is expensive, and affordable equipment is prohibitively slow. Researchers at Missouri S & T have successfully developed and demonstrated several innovative millimeter wave imaging systems capable of real-time, high-resolution imaging at frequencies up to 150 G ...

    STTR Phase I 2014 Department of DefenseArmy
  9. Powerful Source of Collimated Coherent Infrared Radiation with Pulse Duration Fewer than Ten Cycles

    SBC: N.P. PHOTONICS, INC.            Topic: A14AT006

    Few-cycle mid-infrared lasers are highly demanded for a variety of practical applications. NP Photonics and University of Arizona propose to develop a wavelength tunable and power-scalable optical parametric laser system at 8-12 micron capable of producing collimated few-cycle pulses with pulse energy>100 microJoule. In this phase I program, we will design the whole laser system and do a feasibil ...

    STTR Phase I 2014 Department of DefenseArmy
  10. Microplasma Vaporization Technology for Novel Magnesium Alloys and Composites

    SBC: LYNNTECH INC.            Topic: A14AT007

    The use of novel magnesium materials with desirable properties can provide significant weight reduction and improved fuel economy in military, automobile, and aerospace applications. The proposed project aims to develop a microplasma discharge based magnesium vaporization process for manufacturing of novel magnesium alloys and composites. The method utilizes operation of a microplasma discharge in ...

    STTR Phase I 2014 Department of DefenseArmy
US Flag An Official Website of the United States Government