Award Data

The project will remove a key difficulty that currently hampers many existing methods for computing unsteady electromagnetic waves on unbounded regions. Numerical accuracy and/or stability may deteriorate over long times due to the treatment of artificial outer boundaries. We propose to develop a universal algorithm and software that will correct this problem by employing the Huygens' principle an ...

This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

ABSTRACT: The overall goal of the proposed effort is to develop and demonstrate a general-purpose, fast, and reliable management and learning software tool for analyzing massive data sets generated by dynamic multi-disciplinary simulation. In Phase I, key technology elements were developed and proof-of-principle was successfully demonstrated. Data management software encapsulating salient feature ...

Our objective is to significantly increase the electron transfer efficiency of the enzyme-catalyzed reactions at electrodes and thereby establish a new state-of-the-art power source for military and commercial systems. The approach is to develop a novel method for orienting enzymes immobilized onto the electrode surface that results in facilitated charge transfer. The proposed bio-electrode techn ...

ABSTRACT: The goal of this project is to develop theoretical models for electrode erosion in high-pressure arcs and incorporate them into computational tools for simulations of arc heaters. The complexity of the electrode material removal process is associated with the multi-phase nature of the arc-electrode interactions, melting and vaporization of the electrodes near the arc foot. Available mod ...

We propose a rapid mapping and 3-D visualization system especially suited for inside buildings, tunnels, urban canyons, and other environments where GPS may be poor or not available. The system--which was fully demonstrated in our Phase I effort-- includes mobile Sensor Nodes that wirelessly supply compressed 3D range data and color imagery to a central Fusion Node. The Fusion Node runs 3D recon ...

ABSTRACT: The overall technical objective of this Phase II effort is to develop computational tools for computing response sensitivities of parametric multi-disciplinary air vehicle systems that exhibit nonlinear dynamic behavior for use in gradient-based optimization, smart sampling, uncertainty quantification, and risk assessment. To this end, the ZONA/MIT team will extend the 2-D ZEUS time-dom ...

Ultrafast true random number generators are ideal for data encryption, Monte Carlo testing, and other data transport applications. Torch"s team has extensive experience designing, building, and testing oscillators based on the innovative, hybrid, exactly-solvable, chaotic oscillator theory as developed by Corron, Blakely and Pethel. These oscillators are capable of generating provably-chaotic wa ...

ABSTRACT: Due to scarcity of spectrum, Dynamic Spectrum Access (DSA) becomes a needed technology to improve the utilization of electromagnetic spectrum for DoD satellite communication. However, current DSA approaches are developed for terrestrial communications without addressing the unique challenges for SATCOM environments such as error-prone spectrum sensing, high mobility, and large coverage. ...