Award Data

Genome-scale predictable cellular design and engineering of biomanufacturing systems is the overarching goal of DARPAs Living Foundries and 1000 Molecules programs and, if realized, will enable rapid engineering of living systems for a broad range of applications in biotechnology and pharmacology. However, constructing living cells with designed genome is an arduous task that is severely limited ...

Among the factors that inhibit the use of composite materials in both general aviation aircraft and DoD platforms are the relatively high cost of engineering and certification. Unless manufacturers control risk when introducing new or advanced materials and processes for aircraft, the potential benefits will be lost to the industry. For small commercial applications the problem is compounded by ...

This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

ABSTRACT: The Air Force seeks to improve the accuracy of orbit specification and of 72-h orbit predictions beyond present capabilities. Thermospheric neutral density and satellite ballistic coefficient strongly impact satellite drag estimation, which is a leading source of error in orbit predictions in LEO. The goal of this Phase II project is to develop a satellite drag specification capability ...

ABSTRACT: In this STTR Tech-X corporation in partnership with the University of Washington will improve a commercial plasma modeling tool, Nautilus, for simulating high-temperature multi-fluid plasmas for problems such as the field reversed configuration, dense plasma focus and the plasma opening switch. Semi-implicit algorithms will be implemented in Nautilus so that the speed of light and elec ...

ABSTRACT: Microscopy is a critical enabling technology for advancing our understanding of nature. Imaging nano-scale objects with light in the extreme ultraviolet (EUV) and soft x-ray regions of the spectrum has advantages over visible light for several reasons including: resolution, elemental specificity, and the ability to image internal structures. Coherent diffractive imaging (CDI) has been ...

We propose a rapid mapping and 3-D visualization system especially suited for inside buildings, tunnels, urban canyons, and other environments where GPS may be poor or not available. The system--which was fully demonstrated in our Phase I effort-- includes mobile Sensor Nodes that wirelessly supply compressed 3D range data and color imagery to a central Fusion Node. The Fusion Node runs 3D recon ...

The overall goal of this STTR program is to develop an efficient, high-fidelity, CFD-based design tool for the simulation of ship-board flight testing of autonomous UAV systems. In the first phase of this program, an overall flight simulation framework that employs a modular approach to the flight simulation problem was developed. Phase II of the program demonstrated a fully coupled aircraft/ship ...

Our initial, practical and potentially commercial approach, based upon years of basic and applied research in chaotic computation, was developed in Phase I of our project. Following upon phase I of the STTR project we propose, in Phase II, to engineer, synthesize, and exploit the rich, intrinsic dynamics of nonlinear and chaotic circuits and systems to implement reconfigurable, secure and noise re ...

ABSTRACT: Due to scarcity of spectrum, Dynamic Spectrum Access (DSA) becomes a needed technology to improve the utilization of electromagnetic spectrum for DoD satellite communication. However, current DSA approaches are developed for terrestrial communications without addressing the unique challenges for SATCOM environments such as error-prone spectrum sensing, high mobility, and large coverage. ...