Award Data

This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

We propose a rapid mapping and 3-D visualization system especially suited for inside buildings, tunnels, urban canyons, and other environments where GPS may be poor or not available. The system--which was fully demonstrated in our Phase I effort-- includes mobile Sensor Nodes that wirelessly supply compressed 3D range data and color imagery to a central Fusion Node. The Fusion Node runs 3D recon ...

ABSTRACT: The overall technical objective of this Phase II effort is to develop computational tools for computing response sensitivities of parametric multi-disciplinary air vehicle systems that exhibit nonlinear dynamic behavior for use in gradient-based optimization, smart sampling, uncertainty quantification, and risk assessment. To this end, the ZONA/MIT team will extend the 2-D ZEUS time-dom ...

During covert operations, the U.S. Army may be required to breach a concrete structure using a controlled explosion. When choosing the most effective charge size and placement, it is vital to perform a rapid field assessment of the material and structural properties of the target structure. However, high strength concrete materials (such as Ultra-High Performance Concrete), including steel fiber r ...

Utilizing a novel solid/gas source CVD reactor designed for the growth of large area (substrates up to 4"in diameter) MoS2 single layer (SL) and multiple layer (ML) films, and leveraging already demonstrated capabilities in the growth and fabrication of 2D-FETs based on graphene and WSe2, we are proposing the growth, fabrication and testing of MoS2-based RF FETs. Utilizing a novel and optimized s ...

ABSTRACT: Due to scarcity of spectrum, Dynamic Spectrum Access (DSA) becomes a needed technology to improve the utilization of electromagnetic spectrum for DoD satellite communication. However, current DSA approaches are developed for terrestrial communications without addressing the unique challenges for SATCOM environments such as error-prone spectrum sensing, high mobility, and large coverage. ...

ABSTRACT: Coordinating and sharing information across multi-level security (MLS) networks are of great interest in many military applications. However, it is very challenging to accomplish those goals due to the heterogeneous security classifications of different network domains. The recent proposed cross-domain solutions (CDS) provide initial steps to make such applications possible. However, th ...

ABSTRACT: The innovation proposed is a computationally-tractable, physics-based, portable turbulent combustion modeling strategy for application to a wide range of Air Force aero-propulsive systems, including augmentors, liquid rockets and scramjets. This modeling strategy will be implemented within an Application Programming Interface (API) library suitable for easy integration within Air Force ...

We propose a platform for aerial environmental monitoring based on the integration of two advanced technologies for the first time: a lightweight, flying robotic platform capable of hovering and swarming, and a compact, low-power chemical sensor platform called the Molecular Property Spectrometer (MPS): a robust, low-cost, silicon-chip-based micro-electro-mechanical system (MEMS) that has been use ...