You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Physics-Based Identification, Modeling and Management Infrastructure of Aeroelastic Limit-Cycle Oscillations

    SBC: Advanced Dynamics, Inc.            Topic: AF07T006

    The proposed research program aims to develop a physics-based identification, modeling and management infrastructure for aeroelastic limit-cycle oscillations. This infrastructure will be built upon high fidelity state-of-the-art theoretical/computational methods as validated and verified by available experimental data bases, and will include (1) rapid flutter boundary determination for a wide ran ...

    STTR Phase I 2007 Department of DefenseAir Force
  2. Bulk, Exchange-Coupled Nitride Magnets

    SBC: Advanced Materials Corp            Topic: A06T003

    During Phase I, we have conducted proof-of-principle experiments to fabricate exchange-coupled isotropic permanent magnets with SmFeN-Fe4N compositions employing shock wave consolidation technique. We have also successfully synthesized nearly 100% Fe16N2 in bulk form. Under this Phase II plan, we propose to optimize and further enhance the isotropic exchange-coupled permanent magnets with higher e ...

    STTR Phase II 2007 Department of DefenseArmy
  3. TSR-SHIELD: Time & Spatially Resolved Standoff Hyperspectral Imaging Explosives LIDAR Detector

    SBC: ChemImage Sensor Systems            Topic: A06T006

    Laser Induced Breakdown Spectroscopy (LIBS) is being successfully transitioned to field applications in both close-contact (proximity) and standoff detection modes. LIBS is attractive since it can be used to detect a wide range of chemical, biological and explosive (CBE) hazardous materials. While LIBS is well suited to evaluation of complex hazards, including improvised explosive devices (IEDs) ...

    STTR Phase II 2007 Department of DefenseArmy
  4. High efficiency deep green light emitting diode

    SBC: CRYSTAL PLEX            Topic: A07T018

    Crystalplex has developed novel semiconductor nanocrystal technology that can be a platform solution to meet the Army's desire for a light emitting diode (LED) with enhanced output in the deep green region using nanoparticles. This innovation produces an efficient deep green (555-585 nm) nanoparticle emitter capable of sustaining the Army's stated goal of 120 lumens per watt of input power. Crys ...

    STTR Phase I 2007 Department of DefenseArmy
  5. High Temp High Energy Product Permanent Magnet Material

    SBC: ELECTRON ENERGY CORP            Topic: AF05T024

    Electron Energy Corporation and University of Delaware propose to develop multiphase nanocomposite magnets with room temperature maximum energy product potentially up to 100 MGOe for high temperature applications. Multiphase nanocomposite magnets could take the advantage of the extremely high coercivity of SmCo alloys, the high saturation magnetization and moderate intrinsic coercivity of other ha ...

    STTR Phase II 2007 Department of DefenseAir Force
  6. Physics-Based Identification and Management of Aeroelastic Limit-Cycle Oscillations (LCO)

    SBC: EQUILIBRIA            Topic: AF07T006

    The objective of the proposed effort is to develop a systematic approach for building reduced-order models (nonlinear coupled finite-degree-of-freedom equations) capable of reliably modeling and predicting limit cycle oscillations (LCOs) and using these models in LCO management procedures. The models will be developed by combining (a) physical observations from ground vibration, wind tunnel, and ...

    STTR Phase I 2007 Department of DefenseAir Force
  7. Optimal Design of Compact Fuel Cell Hybrid Power Systems

    SBC: INTERACTIVE DATA VISUALIZATION            Topic: A06T014

    This work will continue the use of numerical methods to determine optimal design parameters for a compact hybrid fuel cell power system driven by a statistically determined load profile. Detailed physics-based models will be used to represent the bahavior of the components in the hybrid system. The components considered in the hybrid system for Phase II will be a PEM fuel cell, Li-ion batteries an ...

    STTR Phase II 2007 Department of DefenseArmy
  8. Wavelength and Polarization Agile Infrared Detector Materials

    SBC: MILSYS TECHNOLOGIES, LLC            Topic: AF07T027

    Development of new generation of integrated FPAs that are both multispectral and polarimetric in the IR window is proposed for the detection and classification of battlespace objects. The use of existing sensor and camera technology, as the baseline, allows for reduced prototype and development time. The integration of both the wavelength and polarization selective elements within the FPA will p ...

    STTR Phase I 2007 Department of DefenseAir Force
  9. Military Surgical Information System

    SBC: MOBERG RESEARCH INC            Topic: A07T038

    This project will develop an open architecture "component based" surgical information system for the military health care system. The system will build upon our current commercial data collection system that is FDA cleared and the result of several prior SBIR awards. We will add components to complete the solicitation requirements. To address a broader and more durable goal we will focus on deve ...

    STTR Phase I 2007 Department of DefenseArmy
  10. Bone-Conducted Sound Transmission and Attenuation

    SBC: CREARE LLC            Topic: AF06T035

    Hearing protection for personnel working in high-noise environments presents an important challenge for the scientific and engineering community. Air Force maintenance personnel working in close proximity to operating jet aircraft can be exposed to sound levels approaching 150 dBA. At these levels, the attenuation provided by hearing protection devices (HPDs) is limited by bone-conducted sound th ...

    STTR Phase II 2007 Department of DefenseAir Force
US Flag An Official Website of the United States Government