You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Real-Time Sensor Data Processing and Compression Performed On-board Unmanned Aerial Systems (UAS)
SBC: Dragonfly Pictures, Inc. Topic: AF131132ABSTRACT: The K-128 co-processor leverages insights from neuroscience to achieve superior performance. Unlike previous efforts along those lines, our approach is to create a software programmable co-processor that runs existing applications. One of the most salient characteristics of such a co-processor is its power efficiency: not just a few percent more efficient than a traditional processor, b ...
SBIR Phase I 2014 Department of DefenseAir Force -
In-Plane Conductivity Improvement to Fiber Reinforced Composite Materials (MSC P4146)
SBC: MATERIALS SCIENCES LLC Topic: A13070Missile modernization and future missile designs are utilizing more sophisticated and higher powered electronics in the pursuit of extended missile range, improved accuracy and precision targeting for striking enemy threats. Tight packaging and sophistication of these electronic systems can generate significant heat loads, which needs to be dissipated efficiently in order to maintain functionality ...
SBIR Phase I 2014 Department of DefenseArmy -
Robust, Lightweight Wiring for Space Applications
SBC: MINNESOTA WIRE & CABLE CO Topic: AF112093ABSTRACT: An ability to reduce the weight of cables has the potential to provide significant cost savings, reduce maintenance and improve reliability of satellites. The costs of developing and producing satellites are linearly proportional with the satellite"s weight, with each kilogram costing around $1 million when delivery-to-space costs are included. With global satellite launches expected to ...
SBIR Phase II 2014 Department of DefenseAir Force -
Real Time 3-D Modeling and Immersive Visualization for Enhanced Soldier Situation Awareness
SBC: Carnegie Robotics LLC Topic: A12aT003We propose a rapid mapping and 3-D visualization system especially suited for inside buildings, tunnels, urban canyons, and other environments where GPS may be poor or not available. The system--which was fully demonstrated in our Phase I effort-- includes mobile Sensor Nodes that wirelessly supply compressed 3D range data and color imagery to a central Fusion Node. The Fusion Node runs 3D recon ...
STTR Phase II 2014 Department of DefenseArmy -
Modular Flexible Weapons Integration
SBC: COMBUSTION RESEARCH & FLOW TECHNOLOGY INC Topic: AF141076CRAFT Tech proposes the development of an innovative design optimization tool called"AeroRCS"which will simultaneously solve for both aerodynamic performance as well as electromagnetic reflectivity (Radar Cross Section). When operated in an automated environment, AeroRCS will intelligently"morph"and steer the shape to converge on an optimal solutions. AeroRCS will be demonstrated by developing ...
SBIR Phase I 2014 Department of DefenseAir Force -
Selective Availability Anti-Spoofing Module (SAASM) Compliant GPS Receiver for GEO
SBC: MINERVA SYSTEMS & TECHNOLOGIES LLC Topic: AF141113The objective of this proposal is to develop Selective Availability Anti-Spoofing Module (SAASM) compliant GPS receiver for Geosynchronous Earth Orbit (GEO) applications. In this proposal, we explore an approach to design the GEO GPS SAASM receiver based on improved techniques for signal acquisition (or detection) and then signal tracking (and demodulation) of weak GPS signals. GPS signals availa ...
SBIR Phase I 2014 Department of DefenseAir Force -
Environmental Control Unit with Integrated Thermal Storage
SBC: ADVANCED COOLING TECHNOLOGIES INC Topic: OSD13EP1Advanced Cooling Technologies, Inc. (ACT) proposes the development of an Environmental Control Unit (ECU) that uses an integrated Phase Change Material (PCM) to provide thermal energy storage. The PCM is contained within the system. During the thermal energy regeneration or collection stages of operation, the coolant is pumped through the PCM to remove or deposit thermal energy, respectively. I ...
SBIR Phase I 2014 Department of DefenseArmy -
Advanced Programming and Teaching Interfaces for Autonomous System Control
SBC: RobotWits LLC Topic: OSD13HS1Achieving robust autonomy by demonstration is challenging for several reasons. First, it is important to be able to provide demonstrations in a way that they capture the key aspects of robot interaction with environment. Second, the interface for providing demonstrations needs to be friendly enough for a non-technical user such as a Soldier. Third, it is critical to be able to verify the safety of ...
SBIR Phase I 2014 Department of DefenseArmy -
BLAST: A System for Bandwidth- and Latency-Scalable Teleoperation
SBC: Neya Systems, LLC Topic: OSD13HS3Most current teleoperated ground vehicle systems require a high-bandwidth link to support either real-time streaming video or streamed 3D structure back to the operator control unit, and experience significant performance degradation in the presence of communication latencies as small as 100 milliseconds. These latency and bandwidth requirements severely hamper use of teleop systems in situations ...
SBIR Phase I 2014 Department of DefenseArmy -
Enabling Flexible Materials, Devices and Processes for Defense
SBC: American Semiconductor, Inc. Topic: AF121003ABSTRACT:Emergence and feasibility for flexible body-worn electronics and particularly medical patches requires high performance electronics capability.The problem is that these new technologies must have flexible and conformal physical formats and conventional electronic components are not in any way flexible. In the CLAS Phase I program, a new flexible high-performance manufacturing and material ...
SBIR Phase II 2014 Department of DefenseAir Force