You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE

    SBC: 3F LLC            Topic: AF06020

    Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.

    SBIR Phase I 2006 Department of DefenseAir Force
  2. Single ply 3Dwoven Functionally Gradient Multi-Fiber / Multi-Matrix Composites with Thermal Management Systems

    SBC: 3TEX, Inc.            Topic: AF04249

    In composites, not only can properties vary with load direction, fiber based composites also offer the unique ability to tailor material properties locally. Localized matrix or fiber architecture changes can meet local mechanical, electrical, or thermal loads within a component or vehicle, without weight penalty or resort to additional external structures. In Phase I, the team used 3TEX 3-D wea ...

    SBIR Phase II 2006 Department of DefenseAir Force
  3. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson’s ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work is focused on develop ...

    SBIR Phase II 2006 Department of DefenseAir Force
  4. Flow-Field Seeding Techniques for Large Transonic Wind Tunnels

    SBC: Aero Systems Engineering, Inc.            Topic: AF06297

    Optical measurements including laser velocimetry (LV), particle image velocimetry (PIV), and other similar techniques are becoming a more important part of aerodynamic testing. However their implementation into large production wind tunnels is severely hindered by difficulties with flow seeding. Phase I of this program will focus on the problem of seed delivery and dispersal into a transonic strea ...

    SBIR Phase I 2006 Department of DefenseAir Force
  5. Advanced Frangible Composite Structure

    SBC: MARK G. MILLER, INC.            Topic: AF06339

    The technical objectives of this SBIR proposal include the design and verification of a frangible composite ILS Glideslope Tower that does not require guy wires (i.e., will maintain existing tolerances and mission performance capabilities). ATSI’s technical approach is based upon the high probability that a qualified, frangible Glideslope Tower can be designed and developed using existing/prove ...

    SBIR Phase I 2006 Department of DefenseAir Force
  6. Commercially Rad-hard Advanced Digital Library (CRADL).

    SBC: American Semiconductor, Inc.            Topic: AF05018

    The Air Force Research Laboratory (AFRL), U.S. Air Force and agencies like the National Aeronautics and Space Administration (NASA) have a current and future need for advanced commercially available inherently rad-hard primitive cell libraries to support new designs for satellites and other spacecraft. American Semiconductor Inc. proposes a new core cell library that can meet next generation high ...

    SBIR Phase II 2006 Department of DefenseAir Force
  7. Wax Substitutes for Melt Castable Explosive Fills.

    SBC: Applied Colloids            Topic: AF06151

    The use of carnauba wax in melt/castable explosives yields a insensitive explosive formulation that enhances overall safety for the use of these munitions in the field. However, carnauba wax is only obtained from overseas sources and there is no domestic source for this material. This leads to shortages of material and higher prices. There exists a need for a wax substitute to replace the carna ...

    SBIR Phase I 2006 Department of DefenseAir Force
  8. Materials Research for the Development of Agent Standard Reference Materials and Analytical Test Apparatus

    SBC: DAKOTA ANALYTICAL SOLUTIONS            Topic: CBD06106

    Development and production of semi-permeable and permselective polymer membranes can fill a critical need for standard reference materials for AVLAG, CBART, and IPE acquisition programs. Optimizing the permselectivity of tri-block copolymers to specific chemical agents, non-traditional agents, and toxic industrial chemicals and materials will result in the formation of suitable and affordable ref ...

    SBIR Phase I 2006 Department of DefenseOffice for Chemical and Biological Defense
  9. Multi-spectral Physics-based Projector

    SBC: EVANS & SUTHERLAND COMPUTER CORP.            Topic: AF06344

    The overall objective for the proposed Phase I effort is to demonstrate the feasibility of a multispectral physics-based projector for displaying visible and infrared correlated imagery for daylight and night vision goggle training stimulation. This projector system, if developed, would have the ability to simultaneously project normal human-visible spectrum scenes as well as low-energy near-infra ...

    SBIR Phase I 2006 Department of DefenseAir Force
  10. Recycling Composite Scrap and Waste Materials

    SBC: FIREBIRD ADVANCED MATERIALS, INC.            Topic: AF06081

    Recycling of composites manufacturing scrap and end-of-life waste is expected to become more important as the use of composite materials expands into different applications. Carbon Fiber Reinforced Polymer (CFRP) wastes especially are a potentially valuable source of recycled carbon fibers if an economic and environmentally friendly technology for recycling these fibers can be developed. The Pha ...

    SBIR Phase I 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government