You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Communications-On-The-Move (COTM) Antenna Pointing and Stabilization System

    SBC: Ross-Hime Designs Inc            Topic: AF083050

    Ross-Hime Designs, Inc. Minneapolis, Minnesota and BAE Systems Wayne, New Jersey are pleased to respond to the DOD''s request for development of a robust, high performance Comunications-On-the-Move (COTM) system. The Ross-Hime Designs/ BAE team will deliver an operable, servo controlled pedestal with control electronics, user controllable from a Host computer. They will be developing and charact ...

    SBIR Phase II 2010 Department of DefenseAir Force
  2. Vibration Analysis of Rotating Plant Machinery

    SBC: SENTIENT SCIENCE CORPORATION            Topic: AF073135

    The Arnold Engineering Development Center has witnessed vibration anomalies on facility equipment that have raised concerns about possible catastrophic or costly failures. In response, AEDC is seeking an advanced, comprehensive condition monitoring system to provide accurate and timely health information; information that will allow AEDC to foresee and avoid unexpected, and possibly catastrophic ...

    SBIR Phase II 2010 Department of DefenseAir Force
  3. Miniaturized Thermocouple Scanner

    SBC: STREAMLINE AUTOMATION LLC            Topic: AF083258

    The AEDC Engine Test Facility (ETF) has more than 20 test cells that can be used for testing prototype propulsion systems and components. The testing of propulsion systems requires significant data acquisition capabilities, with one test utilizing more than 4200 channels of instrumentation, including 700 thermocouples. In response to the sheer set-up challenge, AEDC has developed the concept of ...

    SBIR Phase II 2010 Department of DefenseAir Force
  4. Multimodal Synthetic Aperture Radar (MM-SAR) Exploitation

    SBC: Radiance Technologies, Inc.            Topic: AF083014

    SAR Analyst production efficiency and proficiency can be increased through the application of attention focusing filters which draw attention to targets and changes. The attention focusing filters will be created using a cognitive systems engineering approach to the current issues that analysts face when operating within the given problem set of wide area, persistent surveillance in irregular war ...

    SBIR Phase II 2010 Department of DefenseAir Force
  5. Adaptive Integrated Multi-Modal Sensing Array

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: AF08BT02

    Nanoscale infrared detectors are emerging as a potentially powerful alternative to traditional infrared detector technologies. The University of New Mexico has developed dots in a double well (DDWELL) quantum dot infrared photodetectors which have a spectral responsivity that can be tuned by controlling the bias voltage applied. In this Phase II effort, Polaris Sensor and UNM would fabricate a g ...

    STTR Phase II 2010 Department of DefenseAir Force
  6. TETMAN: Three-dimensional Exploitation Techniques for Moving And Non-rigid targets

    SBC: PHOTON-X, INC.            Topic: AF083172

    Humans may visibly reveal their disposition or intent through body actions. Recognizing these body activities often is key to determining human intent. Human activities involve 3D bodies in a 3D environment, current imaging technologies try to recognize body activities from their 2D projections. Photon-X uses proprietary spatial phase imaging technology which acquires high-resolution 3D video im ...

    SBIR Phase II 2010 Department of DefenseAir Force
  7. Multifunctional Prepregs and Laminated Composites Made by Shear Pressing Carbon Nanotube Arrays

    SBC: 3TEX, Inc.            Topic: AF09BT36

    A novel method of fabricating carbon nanotube (CNT) reinforced polymer matrix composites is proposed. It includes growing super-aligned carbon nanotube arrays on a flat substrate, using NCSU proprietary shear pressing method to compress the grown arrays into a layer of densely packed, highly aligned CNTs inclined at an angle of several degrees to the substrate, separating the produced CNT sheet fr ...

    STTR Phase I 2010 Department of DefenseAir Force
  8. Terahertz Focal Plane Arrays

    SBC: Aegis Technologies Group, LLC, The            Topic: AF09BT33

    Recent advances in THz-source stability, power and practicality have opened the door for active THz imaging in both commercial and military settings. AEgis is teaming with U Buffalo to develop a THz detection device that utilizes classical rectification effects in semiconductor point contacts (SPCs) to achieve response in the 1 to 10 THz range and is capable of operating at temperatures over 150 K ...

    STTR Phase I 2010 Department of DefenseAir Force
  9. New Laser Eye Protection (LEP) Technology for Visors

    SBC: Aegis Technologies Group, LLC, The            Topic: AF083013

    Laser eye protection is important due to the availability of laser sources (continuous and pulsed) over a broad range of wavelengths. The military uses many laser systems (e.g., training devices, range finders, target designators, communications devices) that emit potentially eye damaging radiation. Because personnel risk exposure to these devices, a growing need exists for eye protection at a va ...

    SBIR Phase II 2010 Department of DefenseAir Force
  10. Measurement of laser irradiance on target for directed energy weapons

    SBC: Aegis Technologies Group, LLC, The            Topic: AF093009

    The Laser Irradiance Measurement on Target (LIMT) project will provide a sensor mesh for direct, on-target measurement of laser beam characteristics of interest (e.g., irradiance level, beam size, time history of beam shape). Activities during Phase 1 of this project include identification and prioritization of requirements; design of system and subsystem components; evaluation of component design ...

    SBIR Phase I 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government