You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. STTR Phase II: HIGH-STRENGTH LOW-COST FIBER VIA MULTI-COMPONENT NANOFIBER (MCN) SPINNING

    SBC: 3F LLC            Topic: AM

    This Small Business Technology Transfer Research (STTR) Phase II project has the overall objective of developing a multi-component melt spinning approach to produce a new family of high performance fibers using standard low-cost polymers. The new high-strength and/or high-modulus polymeric fiber is to be made using cutting-edge but commercially available spinning technology and an innovative and ...

    STTR Phase II 2010 National Science Foundation
  2. Multifunctional Prepregs and Laminated Composites Made by Shear Pressing Carbon Nanotube Arrays

    SBC: 3TEX, Inc.            Topic: AF09BT36

    A novel method of fabricating carbon nanotube (CNT) reinforced polymer matrix composites is proposed. It includes growing super-aligned carbon nanotube arrays on a flat substrate, using NCSU proprietary shear pressing method to compress the grown arrays into a layer of densely packed, highly aligned CNTs inclined at an angle of several degrees to the substrate, separating the produced CNT sheet fr ...

    STTR Phase I 2010 Department of DefenseAir Force
  3. Ultra Low Power, High Performance Microprocessor Core for Military and Space Applications

    SBC: American Semiconductor, Inc.            Topic: AF093082

    For Phase I, an ultra low power, high performance microprocessor core using a combination of double-gated and independent double-gated Flexfet™ SOI CMOS technology from American Semiconductor will be designed to address the requirements of military and space communication systems. High integration feasibility using Flexfet technologies followed by confirmation of the power and performance improv ...

    SBIR Phase I 2010 Department of DefenseAir Force
  4. Robust Wideband Aircraft Altitude Estimation for Over-the-Horizon HF Radar

    SBC: STRAD Corporation            Topic: AF083184

    Robust altitude estimation for over-the-horizon radar (OTHR) requires a combination of advanced signal processing and high fidelity ionospheric propagation modeling. Since aircraft height is manifested in closely-spaced direct and ground-bounce reflections off the target, during Phase I, we have developed two new approaches for discriminating small delay differences from a sequence of radar dwells ...

    SBIR Phase II 2010 Department of DefenseAir Force
  5. A Proactive Countermeasure to Harden Integrated Circuits Against Exploitation

    SBC: Computer Measurement Laboratory, LLC            Topic: OSD10IA1

    We propose to implement a novel countermeasure against the exploitation of integrated circuit hardware. The proposed countermeasure is applicable to both FPGAs and ASICs, increases design obfuscation and promises to block embedded hardware exploits. It also is fully compatible with virtually any other hardware exploit countermeasure and reduces forensic costs when exploits are suspected. The propo ...

    SBIR Phase I 2010 Department of DefenseAir Force
  6. SBIR Phase I:Bio-based Corrosion Inhibitors

    SBC: CORTEC CORP.            Topic: BC

    This SBIR Phase I project will evaluate the feasibility of producing bio-based, environmentally benign, products for the prevention and treatment of corrosion and scale from low-value agricultural by-product streams. These by-products are generally available in large quantities and fairly uniform composition. The broader/commercial impact of the proposed project will be introduction of a line of ...

    SBIR Phase I 2010 National Science Foundation
  7. THREE-PHASE FLOWMETER FOR OIL INDUSTRY

    SBC: En'urga Inc.            Topic: BC

    This Small Business Innovation Research (SBIR) Phase I project will evaluate the feasibility of developing a multiphase flowmetering and characterization system for oil industry. New developments in reservoir management and production techniques have resulted in the requirement for multiphase flowmeters to replace conventional test separators. The proposed system will include three advanced multip ...

    SBIR Phase I 2010 National Science Foundation
  8. SBIR Phase I:Visual Information Delivery Robot for Visually Impaired Children

    SBC: En'urga Inc.            Topic: EA

    This Small Business Innovation Research (SBIR) Phase I project will evaluate the feasibility of a robotic system to detect and track a child's finger so that the scene that the child wishes to see can be displayed at high magnification on a monitor. There are two issues of intellectual merit that will be addressed during the Phase I work. The first issue is analyzing the pointing pattern of childr ...

    SBIR Phase I 2010 National Science Foundation
  9. SBIR Phase I: Use of Recycled Carbon Fibers in Sheet Molding Compounds (SMC)

    SBC: FIREBIRD ADVANCED MATERIALS, INC.            Topic: NM

    This Small Business Innovation Research Phase 1 project will develop materials processing technologies to effectively utilize recycled carbon fiber (RCF) derived from carbon fiber reinforced polymer (CFRP) thermoset wastes as fiber reinforcement in structural sheet molding compounds (SMC). As recycled carbon fibers have different morphologies and properties than the virgin carbon fibers currently ...

    SBIR Phase I 2010 National Science Foundation
  10. STTR Phase II: Constitutive Promoters for Crop Improvement

    SBC: GRASSROOTS BIOTECHNOLOGY, INC.            Topic: EO

    This Small Business Technology Transfer (STTR) Phase II project seeks to identify new and improved promoters to create enhanced genetically modified crops. Plant biotechnology relies on the insertion of promoter-gene constructs into plants. The promoter is the portion of DNA that controls when and where a gene is expressed. The relatively few plant promoters in use today have significant limitatio ...

    STTR Phase II 2010 National Science Foundation
US Flag An Official Website of the United States Government