You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Communications-On-The-Move (COTM) Antenna Pointing and Stabilization System

    SBC: Ross-Hime Designs Inc            Topic: AF083050

    Ross-Hime Designs, Inc. Minneapolis, Minnesota and BAE Systems Wayne, New Jersey are pleased to respond to the DOD''s request for development of a robust, high performance Comunications-On-the-Move (COTM) system. The Ross-Hime Designs/ BAE team will deliver an operable, servo controlled pedestal with control electronics, user controllable from a Host computer. They will be developing and charact ...

    SBIR Phase II 2010 Department of DefenseAir Force
  2. Vibration Analysis of Rotating Plant Machinery

    SBC: SENTIENT SCIENCE CORPORATION            Topic: AF073135

    The Arnold Engineering Development Center has witnessed vibration anomalies on facility equipment that have raised concerns about possible catastrophic or costly failures. In response, AEDC is seeking an advanced, comprehensive condition monitoring system to provide accurate and timely health information; information that will allow AEDC to foresee and avoid unexpected, and possibly catastrophic ...

    SBIR Phase II 2010 Department of DefenseAir Force
  3. Multifunctional Prepregs and Laminated Composites Made by Shear Pressing Carbon Nanotube Arrays

    SBC: 3TEX, Inc.            Topic: AF09BT36

    A novel method of fabricating carbon nanotube (CNT) reinforced polymer matrix composites is proposed. It includes growing super-aligned carbon nanotube arrays on a flat substrate, using NCSU proprietary shear pressing method to compress the grown arrays into a layer of densely packed, highly aligned CNTs inclined at an angle of several degrees to the substrate, separating the produced CNT sheet fr ...

    STTR Phase I 2010 Department of DefenseAir Force
  4. Ultra Low Power, High Performance Microprocessor Core for Military and Space Applications

    SBC: American Semiconductor, Inc.            Topic: AF093082

    For Phase I, an ultra low power, high performance microprocessor core using a combination of double-gated and independent double-gated Flexfet™ SOI CMOS technology from American Semiconductor will be designed to address the requirements of military and space communication systems. High integration feasibility using Flexfet technologies followed by confirmation of the power and performance improv ...

    SBIR Phase I 2010 Department of DefenseAir Force
  5. Robust Wideband Aircraft Altitude Estimation for Over-the-Horizon HF Radar

    SBC: STRAD Corporation            Topic: AF083184

    Robust altitude estimation for over-the-horizon radar (OTHR) requires a combination of advanced signal processing and high fidelity ionospheric propagation modeling. Since aircraft height is manifested in closely-spaced direct and ground-bounce reflections off the target, during Phase I, we have developed two new approaches for discriminating small delay differences from a sequence of radar dwells ...

    SBIR Phase II 2010 Department of DefenseAir Force
  6. A Proactive Countermeasure to Harden Integrated Circuits Against Exploitation

    SBC: Computer Measurement Laboratory, LLC            Topic: OSD10IA1

    We propose to implement a novel countermeasure against the exploitation of integrated circuit hardware. The proposed countermeasure is applicable to both FPGAs and ASICs, increases design obfuscation and promises to block embedded hardware exploits. It also is fully compatible with virtually any other hardware exploit countermeasure and reduces forensic costs when exploits are suspected. The propo ...

    SBIR Phase I 2010 Department of DefenseAir Force
  7. High-Productivity, Assured, Mixed-Criticality Systems Development with Real-time Java

    SBC: Fiji Systems LLC            Topic: AF093005

    This proposal will reduce certification costs due to the ability to partition low-criticality tasks and automate the generation of some certification artifacts using compiler techniques. By using Safety Critical Java as the source language, time and space partitioning will not entail expensive context switch cost or require additional memory for multiple operating system instances, which we expect ...

    SBIR Phase I 2010 Department of DefenseAir Force
  8. Innovative Techniques for Defeating HDBT/UGF

    SBC: Bennett Aerospace, Inc.            Topic: AF093096

    Bennett Aerospace proposes to develop an innovative system that will neutralize hard and deeply buried targets (HDBTs). The system would incorporate a novel technologies and advance materials to gain access to the target for intended missions. BENEFIT: This approach will expand upon existing technologies that will be adapted for this application. The benefits of Bennett Aerospace’s modified-COTS ...

    SBIR Phase I 2010 Department of DefenseAir Force
  9. Holographic Waveguide Visor Display

    SBC: Bennett Aerospace, Inc.            Topic: AF093017

    Bennett Aerospace proposes to develop a transparent visor for helmet-mounted display (HMD) applications. The novel visor utilizes the wave-guiding characteristics of light to provide a low mass and a large eye box. BENEFIT: The revolutionary technology provides significant improvements in terms of mass, cost, volume and optical performance. Bennett Aerospace’s approach allows for a larger field ...

    SBIR Phase I 2010 Department of DefenseAir Force
  10. Kinetic Power for Dismounted Warriors

    SBC: Bennett Aerospace, Inc.            Topic: AF093023

    Bennett Aerospace proposes to develop an innovative method of generating electrical power via soldier-worn systems. Our approach integrates energy harvesting structures into various locations on garments and equipment in order to collect kinetic energy. The structures are lightweight and flexible. BENEFIT: Benefits to this approach are numerous in that it provides a simple, though novel, method of ...

    SBIR Phase I 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government