You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. The Use of Boron Nitride for Improved Cold-Cathode Electron Field Emission Technology

    SBC: Electrodynamic Applications Inc            Topic: N/A

    Low-power Hall thrusters offer potentially important advantages for certain military applications but issues of lifetime and efficiency degradation at lower powers are issues hindering its utilization. A factor impacting efficiency is that thestate-of-the-art techniques for electron generation used for neutralization (such as hollow cathodes operating on the same propellant as the thruster) do no ...

    STTR Phase I 2003 Department of DefenseAir Force
  2. Advanced Force Protection Tools (AFPROT) for Integrated Mission Planning


    The goal of this project is to develop an XML-driven platform that will rapidly determine the hazards associated with a collection of chemicals at a given location. Beginning with a query consisting of location, date, and time, the CHAIN (Chemical HazardAssessment Information Network) system will prioritize the materials at the location to provide a ranked list by hazard along with recommended pro ...

    SBIR Phase I 2003 Department of DefenseAir Force
  3. Generic, Multi-Platform, Real-Time Data Monitor

    SBC: FAAC INCORPORATED            Topic: N/A

    Today's weapon systems and engagement doctrine are highly complex. Attempting to understand and glean important details from tabular data, end game results, and 2-D graphs is difficult. Providing a 3-D real-time representation consolidates all availablekinematic information into a single presentation. This enables observation of engineering level information in the physical realm by viewing actual ...

    SBIR Phase I 2003 Department of DefenseAir Force
  4. Multiple-View Genlocked Camera


    Freestyle Technology, Inc. proses to design an build a six-camera video imaging device for use in navigation research. The individual cameras will be attached to two-meter tethers to allow for flexible placement on a variety of platforms. All cameraswill be genlocked to a common signal to assure that corresponding pixels in each camera are sampled at the same time. A user interface will be prov ...

    SBIR Phase I 2003 Department of DefenseAir Force
  5. Munition Deployed Microprobes


    Freestyle Technologies, Inc. proposes to perform exploratory research in the area of munition-deployed microprobes. The baseline microprobe will consist of simple acoustic and sesmic sensors and will be deployed by an autonomous munition at locations ofinterest. Once deployed, the microprobes will form an ad hoc wireless network and passively monitor for targets. The microprobes will signal the ...

    SBIR Phase I 2003 Department of DefenseAir Force
  6. Missile Detection Spatial Spectral Imager

    SBC: I Technology Applications            Topic: N/A

    This proposal is for the development of a fast imaging spectrometer for the measurement of both spatial and spectreal signatures of threat missiles and other targets and backgrounds for improved missile detection and identification. The proposedinnovative snapshot imaging sensor provides both spectral and spatial information at wavelengths appropiate for surface to air missile detection in the mi ...

    SBIR Phase I 2003 Department of DefenseAir Force
  7. Multi-sensor Data Exploitation Capability


    This contract will develop and demonstrate the capability to capture and process data from any sensor without apriori knowledge of the sensor or its model. We will develop the software libraries to process sensor data captured in the format standarddeveloped in phase I. The software libraries will be integrated into the Joint Sensor Integration Fusion Testbed (JSIFT) at AFRL/SNAR and demonstrate ...

    SBIR Phase II 2003 Department of DefenseAir Force
  8. Computational Modeling of Laser Additive Manufacturing Processes

    SBC: INNOVATIVE RESEARCH, INC.            Topic: N/A

    The overall goal of the proposed research is to develop a comprehensive, efficient, and well-validated model for the prediction of the shape and thermal history of components manufactured using Laser Additive Manufacturing (LAM) processes. The proposedmodel will use a combined Eulerian-Lagrangian treatment for analyzing the interactions between the gas and particle phases, and the laser beam. The ...

    SBIR Phase I 2003 Department of DefenseAir Force

    SBC: MALLTECH, LLC            Topic: N/A

    Achieving a combination of high level of strength and toughness in metal alloys has always been the goal of metallurgical research, particularly true in development of construction steel alloys. Significant advances have been made in this area in the pasttwenty years, culminating with introduction of alloys AF1410 and AerMet100. Unfortunately the enhancement of properties was typically obtained th ...

    SBIR Phase II 2003 Department of DefenseAir Force
  10. Nano-engineered Coatings Based on Functionalized Silsesquioxanes

    SBC: MAYATERIALS, INC            Topic: N/A

    Silanization is used commonly to form high quality interfaces between metals and coatings by treating surfaces with silanes RSiCl3 or RSi(OR)3 in a sol-gel like process. R can be many different functional groups ranging from glycidyl epoxy to aniline.These same silanes condense under sol-gel conditions to produce cubic silsesquioxanes [RSiO1.5]8 that have a rigid silica core and multiple functiona ...

    SBIR Phase I 2003 Department of DefenseAir Force
US Flag An Official Website of the United States Government