You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ultra-High Density Ion Propulsion From Ionic Liquids

    SBC: BUSEK CO., INC.            Topic: AF11BT10

    ABSTRACT: Busek Co. Inc. and Massachusetts Institute of Technology (MIT) propose to explore the physical limits of ionic liquid propulsion via development of new theory to explain effects of close packing emission density and to predict performance limits. The research is motivated by observations and tests demonstrating that emission from 2-dimensional porous surfaces yields order of magnitude g ...

    STTR Phase II 2014 Department of DefenseAir Force
  2. Nonequilibrium Plasma-Assisted Combustion-Efficiency Control in Vitiated Air

    SBC: COMBUSTION SCIENCE & ENGINEERING, INC.            Topic: AF13AT04

    ABSTRACT: The ability of plasmas to modify combustion has been known for more than 50 years. Recent advances in plasma generation technology and measurement diagnostics have led to extensive efforts to understand both the kinetics of the plasma-flame interaction and the enhancement of combustion properties such as ignition, extinction, flame speed and dynamics. Combustion Science & Engineering, ...

    STTR Phase I 2014 Department of DefenseAir Force
  3. Scale up of EO polymers and their utilization in novel nano-imprinted sub-wavelength waveguide-based Modulators and Arrays

    SBC: TIPD LLC            Topic: AF11BT01

    ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

    STTR Phase II 2014 Department of DefenseAir Force
  4. New learning technologies for exploitation of layered sensor data

    SBC: LONGSHORTWAY INC.            Topic: AF12BT14

    ABSTRACT: LongShortWay Inc, Boston University, and Applied Communication Sciences propose to develop a dynamic multi-sensor learning system that can adaptively detect target types and activities and schedule sensors to optimize the detection rate BENEFIT: Improved detection rate, increase field of view

    STTR Phase II 2014 Department of DefenseAir Force
  5. Durable Superhydrophobic Anti-icing Nanocomposite Coatings

    SBC: AGILTRON, INC.            Topic: N14AT013

    Agiltron will develop robust and affordable anti-icing and ice-phobic surfaces that are also transparent (>%80) in visible spectrum for superstructures of surface ships in Arctic and cold region operation. Leveraging Agiltron"s previous experiences in mechanically durable superhydrophibic nanocomposite coatings and optically transparent fluoropolymer resins, in collaboration with the Ice Research ...

    STTR Phase I 2014 Department of DefenseNavy
  6. Bioelectronic Fusion Sensor System

    SBC: SENTIENT SCIENCE CORPORATION            Topic: N14AT019

    To address the Navy"s need for a common, scalable, platform for multi-modal 1pA level current sensing for Electrocardiogram (ECG), Electroencephalogram (EEG), and Electrodermal Response (EDR) to be fielded as a miniature wearable device with non-contact electrodes, Sentient and the State University of New York (SUNY) propose to develop the Bioelectronic Fusion Sensor System (BioFuSenS) that will a ...

    STTR Phase I 2014 Department of DefenseNavy
  7. Novel, Low-Cost Phased Arrays Manufactured by 3D Printing (1000-295)

    SBC: SI2 TECHNOLOGIES, INC            Topic: N14AT021

    SI2 Technologies, Inc. (SI2) proposes to develop printed, high-efficiency phased arrays operating at Navy-relevant frequencies. The proposed development effort will include trade studies identifying the best printing technique or combination of techniques to meet the Navys phased array performance goals. The printed array will incorporate both printed radiating elements and an innovative printed p ...

    STTR Phase I 2014 Department of DefenseNavy
  8. Wideband RF Photonic Link with Real-Time Digital Post Processing

    SBC: Pharad, LLC            Topic: N14AT023

    Pharad is teaming with the Applied Physics Laboratory of The Johns Hopkins University to propose and investigate the feasibility of wideband (VHF to SHF) RF-to-digital photonic link architectures with real-time digital signal processing (DSP) that can meet the stringent performance metrics of military systems. The key requirements for our wideband DSP linearized RF-to-digital photonic link include ...

    STTR Phase I 2014 Department of DefenseNavy
  9. Novel Extended-Zone High Power WDM Couplers

    SBC: Q-PEAK INCORPORATED            Topic: AF13AT03

    ABSTRACT: High power and low insertion loss WDM components will be developed. In manufacturing WDM components, solid core fibers in both polarization insensitive and polarization maintaining, will be pursued, along with photonics crystal fiber components. A range of fiber sizes and device specifications will be developed and commercially offered by Q-Peak. The component that we propose to develo ...

    STTR Phase I 2014 Department of DefenseAir Force
  10. High Power WDM Based Upon Mode Coupling

    SBC: ADVALUE PHOTONICS INC            Topic: AF13AT03

    ABSTRACT: AdValue Photonics and University of Arizona propose to demonstrate the capability of fabricating wavelength division multiplexers (WDM) for high-power fiber laser applications. It is based on AdValue Photonics"unique fused fiber technology using large-mode-area (LMA) fibers. Both polarization-maintaining (PM) and non-PM LMA fiber WDMs will be fabricated. By the end of Phase I, two proto ...

    STTR Phase I 2014 Department of DefenseAir Force
US Flag An Official Website of the United States Government