List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Rechargeable Thermal Batteries for Airborne Systems

    SBC: ESKRA TECHNICAL PRODUCTS INC            Topic: AF181018

    Rechargeable (secondary) batteries are needed for improved aircraft systems, that have both high energy density (Whr/liter), high mass density (kg/liter), and can deliver their stored energy in moderately high power pulses over an extended period of time.Thermal batteries are candidates to meet this need.Thermal batteries are traditionally considered non-rechargeable (primary), operating at elevat ...

    SBIR Phase I 2018 Department of DefenseAir Force
  2. Advanced Monopropellant Management Device

    SBC: Exo-Atmospheric Technologies LLC            Topic: AF181036

    Exo-Atmospheric Technologies, LLC (Exo-AT) will undertake the design and development of a propellant management device PMD) designed for the unique fluid property characteristics of AF-M315E monopropellant.Along with its experimental testing partner, Purdue University, Exo-AT will conduct a series of tests to measure fluid properties for AF-M315E.Exo-AT will use these fluid properties (surface ten ...

    SBIR Phase I 2018 Department of DefenseAir Force
  3. Instrumentation for carbon-carbon structures in extreme environments

    SBC: Exo-Atmospheric Technologies LLC            Topic: AF171020

    An integrated measurement sensor for carbon-carbon (C-C) structures is needed for testing in arc jet facilities to meet testing needs for current and future hypersonic flight systems. A commercial-off-the-shelf (COTS) high frequency response pressure sensor and a fabricated temperature, heat flux, and recession sensor built directly into a C-C substrate will be integrated into a test article for ...

    SBIR Phase I 2017 Department of DefenseAir Force
  4. Rapid Deployment of Thermodynamic Capability for Integrated Computational Materials Engineering

    SBC: Computherm, LLC            Topic: AF15AT30

    CompuTherm, LLC proposes to develop innovative new generation software based on the CALPHAD method. This new software, named Pandat-Pro, will be built upon CompuTherms current Pandat software. The significant advances of Pandat-Pro are: (1) Bayesian analysis will be introduced to perform error analysis for both the optimized model parameters and the simulated properties; (2) a database management ...

    STTR Phase II 2016 Department of DefenseAir Force
  5. Rapid Development of Thermodynamic Capability for Integrated Computational Materials Engineering

    SBC: Computherm, LLC            Topic: AF15AT30

    ABSTRACT: CompuTherm, LLC proposes a pilot project to develop an innovative modeling tool for rapid deployment of thermodynamic capability for Integrated Computational Materials Engineering (ICME). To be developed on the basis of CompuTherms current capability, Pandat software, the proposed modeling tool represents the next generation of CALPHAD software. The significant advances of the proposed m ...

    STTR Phase I 2015 Department of DefenseAir Force
  6. Ultra High Repetition Rate Multi-Parameter Imaging Diagnostics for Reacting Flows

    SBC: Orbital Technologies Corporation            Topic: AF11BT16

    ABSTRACT: ORBITEC will develop a new diagnostic to acquire simultaneous planes of velocity and temperature data at very high repetition rates. This diagnostic relies on a novel pulse burst laser system, a phosphor thermometry technique, and the mature PIV method. The work plan will involve developing and testing the laser, refining the integrated technique, and demonstrating it in a supersonic ...

    STTR Phase II 2014 Department of DefenseAir Force
  7. A High Flux Neutron Generator for Measuring Bulk Residual Stress via Diffraction

    SBC: Phoenix LLC            Topic: AF131119

    ABSTRACT: Residual stresses can be created in engineered components by most common fabrication processes (e.g., welding, joining, machining, casting, heat treating, press fitting, etc.). They are of particular concern to the aerospace industry because they are difficult to measure and can lead to premature failure of flight-critical components. There are several established methodologies for ch ...

    SBIR Phase I 2013 Department of DefenseAir Force
  8. Roll-to-Roll Printing of Patterned Nanomembranes on Flexible Substrates

    SBC: SysteMECH, Inc            Topic: OSD10T005

    Flexible electronic and optical devices, including sensors/detectors, waveguides, and photonic crystal structures, have significant promise for improving communication and information processing capabilities in a number of military and commercial applications. However, the development of such flexible devices has been hindered by the lack of effective manufacturing processes for producing these de ...

    STTR Phase II 2013 Department of DefenseAir Force
  9. Ultra High Repetition Rate Multi-Parameter Imaging Diagnostics for Reacting Flows

    SBC: Orbital Technologies Corporation            Topic: AF11BT16

    ABSTRACT: Study of non-stationary phenomena in turbulent combusting flows requires spatial measurements of a set of parameters at kHz rates. Ideally these parameters would include the velocity , temperature, and a relevant species concentration. In response to this need, ORBITEC and the University of Wisconsin-Madison propose to develop a technique to measure velocity, temperature, and OH conce ...

    STTR Phase I 2012 Department of DefenseAir Force
  10. Volume Charge Distribution Measurement in Thin Dielectrics

    SBC: CoMMET, LLC            Topic: AF11BT20

    ABSTRACT: An instrument measuring volume charges in thin dielectric films is proposed. The instrument utilizes an enhanced Pulsed Electro-Acoustic (PEA) technique and delivers submicron spatial and at least 0.1 micro-Coulombs per cubic centimeter resolutions of the charge density. Traditional PEA instruments suffer from significant signal loss due to acoustic mismatches between the testing materi ...

    STTR Phase I 2012 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government