List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. LOW FLYING AIRCRAFT CANNOT BE DETECTED BY STANDARD RADAR BECAUSE OF INTERFERENCE FROM CLUTTER.

    SBC: Active E-o Systems Inc            Topic: N/A

    LOW FLYING AIRCRAFT CANNOT BE DETECTED BY STANDARD RADAR BECAUSE OF INTERFERENCE FROM CLUTTER. THIS PROPOSAL DESCRIBES A COHERENT LASER RADAR SYSTEM APPROACH, CONSISTING OF 2 KM SPACED LASER RADAR SITES THAT SCAN THE SKY IN ELEVATION ANGLE, WHICH CAN DETECT AIRCRAFT BETWEEN THE HORIZON AND 300 METER ALTITUDE. EACH SITE WILL BE BATTERY POWERED AND INTERCONNECTED BY A FIBEROPTIC LOCAL AREA NETWORK T ...

    SBIR Phase I 1986 Department of DefenseAir Force
  2. CONCERN

    SBC: ADA Technologies, Inc.            Topic: N/A

    A PROJECT IS PROPOSED WHERE EXISTING MODELS ARE USED TO PREDICT THE EFFECT OF MULTIPLE BURST AIRSLAP ON HARDENED SILOS. A SMALL NUMER OF THREAT/TARGET CONFIGURATIONS WILL BE SELECTED AS REPRESENTATIVE OF THOSE OF GREATEST INTEREST OR AS BOUNDING THE AIRSLAP PROBLEM. THE MODELS WILL BE EVALUATED AND MATCHED TO THE THREAT/TARGET CASES FOR OPTIMUM PERFORMANCE. THE PREDICTIONS WILL BE TABULATED AS A R ...

    SBIR Phase I 1986 Department of DefenseAir Force
  3. FAILURE MECHANISMS IN COMPOSITE TURBINE BLADES

    SBC: ADTECH SYSTEMS RESEARCH INC            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseAir Force
  4. CONTINUOUS HEATED ROLL FORMING OF THERMOPLASTIC COMPOSITE MATERIALS DEVELOPMENT

    SBC: Advanced Composite Products            Topic: N/A

    THE OBJECTIVE OF THIS PROGRAM IS TO DEVELOP A CONTINUOUS PRODUCTION METHOD BASED ON THE USE OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC COMPOSITE MATERIAL. HEATED ROLL FORMING (HRF), AN ADAPTATION OF THE METAL ROLL FORMING PROCESS, IS TO BE USED BECAUSE OF ITS ABILITY TO PRODUCE A VERY BROAD RANGE OF SHAPES, SIZES, AND MATERIALS IN HIGH VOLUME AND THEREFORE LOW UNIT COST. THE APPROACH TO HRF PROC ...

    SBIR Phase II 1986 Department of DefenseAir Force
  5. DEVELOPMENT

    SBC: Advanced Composite Products            Topic: N/A

    THERMOPLASTIC COMPOSITE MATERIALS SUCH AS GRAPHITE/PPS OFFER THE POTENTIAL TO REDUCE WEIGHT AND ENVIRONMENTAL CORROSION IN MILITARY BOMB RACKS. THIS PROGRAM IS DESIGNED TO APPLY THOSE BENEFITS TO THE MAU-12 AIRCRAFT BOMB EJECTOR RACK ASSEMBLY. AFTER A REVIEW OF AVAILABLE DATA, SEVERAL METAL COMPONENTS OF THE EXISTING BOMB RACK WILL BE SELECTED FOR COMPOSITE DESIGN. ONE OF THESE WILL BE BUILT AND T ...

    SBIR Phase I 1986 Department of DefenseAir Force
  6. MATERIAL AND PROCESS DEVELOPMENT OF NOVEL GRAPHITE/THERMOPLASTIC YARN AND RELATED FORMS

    SBC: Advanced Composite Products            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseAir Force
  7. SYMBOLIC RF SIGNATURE PREDICTION

    SBC: Advanced Decision Systems            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseAir Force
  8. CONCEPTS

    SBC: ADVANCED DIGITAL SYSTEMS, INC.            Topic: N/A

    THE OBJECTIVE OF THE PROPOSED STUDY IS TO ANALYZE THE FEASIBILITY OF MILSTAR INTEGRATION INTO THE SDI SYSTEM. THE ANALYSIS WILL ADDRESS THE POTENTIAL ROLES WHICH MILSTAR COULD SERVE AND THE ADVANTAGES AND DISADVANTAGES WHICH COULD BE ENCOUNTERED WITH SUCH A MERGER.

    SBIR Phase I 1986 Department of DefenseAir Force
  9. ADVANCED PERMEABLE MEMBRANE OBIGGS/OBOGS SYSTEM

    SBC: A/g Technology Corp.            Topic: N/A

    N/A

    SBIR Phase I 1986 Department of DefenseAir Force
  10. A NEW NDE CAPABILITYFOR THIN-SHELLED STRUCTURES

    SBC: Aracor            Topic: N/A

    A POWERFUL, NOW IMAGING MODALITY IDEALLY SUITED FOR THIN-SHELLED STRUCTURES BUT CONSIDERABLY MORE GENERAL IN NATURE IS PROPOSED. THE APPROACH IS BASED ON WELL- ESTABLISHED DIGITAL TOMOSYNTHESIS PRINCIPLES AND MODERN REAL-TIME DIGITAL RADIOGRAPHY TECHNIQUES. A SERIES OF COMPONENT RADIOGRAPHS OF A STRUCTURE TAKEN FROM DIFFERENCE ANGLES ARE MANIPULATED ACCORDING TO A RESTORATIVE ALGORITHM TO RECOVER ...

    SBIR Phase II 1986 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government