List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. AN ADVANCED TECHNOLOGY HIGH POWER DENSITY MINIATURE THERMAL BATTERY

    SBC: Technology Holding, LLC            Topic: N/A

    CERAMATEC AND SAFT HAVE FORMED A TEAM AND ARE PLEASED TO JOINTLY PROPOSE AN EFFORT TO DEVELOP, FABRICATE, AND TEST/EVALUATE A PROTOTYPE ADVANCED TECHNOLOGY HIGH POWER DENSITY THERMAL BATTERY SYSTEM. THE BATTERY UTILIZES A HIGH CONDUCTIVITY LOWER OPERATING TEMPERATURE SOLID ELECTROLYTE WHICH OFFERS NO DEGRADATION OF OVC, HAS LOW HEAT REQUIREMENTS AND HIGH INTEGRITY DUE TO ABSENCE OF LIQUID/VOLATILE ...

    SBIR Phase I 1988 Department of DefenseAir Force
  2. AUTOMATED MECHANICAL DESIGN BASED ON OPTIMIZATION DECOMPOSITION AND FEATURE-BASED MODELING

    SBC: Decision Systems Intl            Topic: N/A

    THE DEVELOPMENT OF A PROTOTYPE SOFTWARE PACKAGE FOR USE IN THE DESIGN OF AN EXAMPLE MECHANICAL PART IS PROPOSED. THE PACKAGE WILL DEMONSTRATE THE FEASIBILITY OF LATER DEVELOPING A GENERAL SOFTWARE PACKAGE FOR THE DESIGN OF MECHANICAL PARTS. THE PACKAGE DECOMPOSES THE DESIGN INTO SYSTEM AND COMPONENT LEVELS. AT EACH LEVEL AN EXPERT SYSTEM/FEATURE-BASED MODELING SOFTWARE PACKAGE ASSISTS WITH CONCEPT ...

    SBIR Phase I 1988 Department of DefenseAir Force
  3. LOW COST RESIN TRANSFER MOLDING OF HIGH PERFORMANCE COMPOSITE COMPONENTS

    SBC: Radius Engineering, Inc.            Topic: N/A

    THIS PROJECT IS TO DEVELOP INNOVATIVE TOOLING AND PROCESSING TECHNOLOGY FOR HIGH RATE, LOW COST MANUFACTURE OF HIGH PERFORMANCE COMPOSITE AIRCRAFT STRUCTURAL COMPONENTS USING THE RESIN TRANSFER MOLDING PROCESS. THE CONVENTIONAL RESIN TRANSFER MOLDING PROCESS WILL BE MODIFIED TO FABRICATE COMPONENTS USING HIGH TEMPERATURE RESINS AND GRAPHITE FIBER REINFORCEMENT AT HIGH FIBER VOLUMES. THE APPROACH W ...

    SBIR Phase I 1988 Department of DefenseAir Force
  4. THE BIODEGRADATION OF FLUOROSILICONE

    SBC: Technical research Associates, Inc.            Topic: N/A

    IMPORTANT IN AIRCRAFT, FLUOROSILICONES ARE WEATHERPROOF, WATER RESISTANT AND MOST IMPORTANTLY, LONG-LIVED. HOWEVER, THERE ARE NORMAL MAINTENANCE AND REPAIR INTERVALS DURING WHICH THE AIRCRAFT MUST BE STRIPPED. PRESENTLY, PHENOLIC SOLVENTS, HOT ALKALI METALS, FLUORINE GAS OR CHLORINE TRIFLUORIDE ARE EMPLOYED IN CONJUNCTION WITH SCRAPING. THIS CAN DAMAGE SURFACE AND UNDERLYING COMPOSITE MATERIAL. MI ...

    SBIR Phase I 1988 Department of DefenseAir Force
  5. THE ENZYMATIC DEGRADATION OF POLYURETHANE PAINT BY SUBSTRATE ADDITION

    SBC: Technical research Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseAir Force
  6. CT INTER/INTRA PIXEL MENSURATION AND IMAGING OF NON-DESTRUCTIVE EVALUATION DATA

    SBC: Perceptronics Solutions, Inc.            Topic: N/A

    THE DETAILED CHARACTERIZATION OF INTERFACES BETWEEN ESSENTIALLY HOMOGENEOUS MATERIALS IS IMPORTANT FOR CT NDE OF SOLID ROCKET NOZZLES AND RELATED COMPONENTS. SPEED AND IMAGE SIZE LIMITATIONS OF CURRENT CT IMAGING AND IMAGE EVALUATION HARDWARE LEAVE SUCH FEATURES UNDER-RESOLVED. THIS RESULTS IN UNACCEPTABLE AMBIGUITY AT BOTH THE SINGLE-PIXEL AND MULTIPLE-PIXEL LEVELS. THE OBJECTIVE OF THIS PROJECT ...

    SBIR Phase I 1988 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government