You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Rapid, Low-Cost, Reformable Tooling for Prototyping and Short-run Manufacturing of Advanced Composite Structures
SBC: 2PHASE TECHNOLOGIES, INC. Topic: N/AA major obstacle for BMD systems to the introduction of new structures and designs using high-performance composites is the time and cost of the tooling required both to prototype and test new components and to transfer accepted designs to manufacturing.The development of reformable, reusable tooling based on 2Phase Technologies' patented state-change materials will reduce the time, cost and effor ...
SBIR Phase I 2003 Department of DefenseMissile Defense Agency -
Crested Tunnel Barriers for Fast, High Density, Nonvolatile Memory Devices
SBC: ADVANCED FUEL RESEARCH, INC. Topic: N/ACrested multi-layer tunnel barriers have been proposed, which offer a revolutionary solution to overcome density to speed trade-offs characteristic of present data storage technologies. Practical implementation of the proposed technology will involve useof thin film materials that are readily manufacturable and CMOS-compatible. A critical need exists for experimental verification of the theoreti ...
STTR Phase II 2003 Department of DefenseAir Force -
Real-Time Optical Smoke Meters
SBC: ADVANCED FUEL RESEARCH, INC. Topic: N/AThe SAE smoke number has been an important measurement for prevention of black, sooty plumes in military and commercial aviation. The current method, however, requires the use of a complex extraction system to bring engine exhaust through a filter paper,and then requires a person to remove the soot covered filter and perform a measurement in an optical reflectometer to determine the smoke number. ...
SBIR Phase I 2003 Department of DefenseAir Force -
A Fail-Safe Controllable Magneto-Rheological Fluid Smart Pad/Damper System for Submarine Based Weapon Shock and Vibration Mitigation
SBC: ADVANCED MATERIALS & DEVICES Topic: N/AAn innovative tunable vibration absorber (TVA) concept was developed in the Phase I feasibility study. This design was selected among others to be developed in full scale in Phase II and Phase II Option based on a detailed theoretical modeling, smallprototype test results, and a cost analysis, which were conducted in Phase I.In Phase II and Phase II Option a new generation of TVA utilizing a clas ...
SBIR Phase I 2003 Department of DefenseNavy -
A Fail-Safe Controllable Magneto-Rheological Fluid Smart Pad/Damper System for Submarine Based Weapon Shock and Vibration Mitigation
SBC: ADVANCED MATERIALS & DEVICES Topic: N/AAn innovative tunable vibration absorber (TVA) concept was developed in the Phase I feasibility study. This design was selected among others to be developed in full scale in Phase II and Phase II Option based on a detailed theoretical modeling, smallprototype test results, and a cost analysis, which were conducted in Phase I.In Phase II and Phase II Option a new generation of TVA utilizing a clas ...
SBIR Phase II 2003 Department of DefenseNavy -
Low Jitter, Burst Mode Arbitrary Waveform Generation for LADAR Scene Projection
SBC: Aegis Technologies Group, LLC, The Topic: N/AAEgis Technologies Group, Inc. is pleased to present this proposal for a Phase II SBIR entitled,
SBIR Phase II 2003 Department of DefenseMissile Defense Agency -
Electromagnetic Compatibility/Interoperability Research Tools For Aging Aircraft COTS Insertion
SBC: Aegis Technologies Group, LLC, The Topic: N/AThis Research and Development (R&D) effort will produce an architecture and prototype for performing quick-look analysis of Electromagnetic (EM) Compatibility (EMC) using Modeling and Simulation (M&S) technologies. The target domain will be aircraftsustainment and will focus on the insertion of commercial-off-the-shelf (COTS) technologies into existing aircraft. COTS technologies provide a cost- ...
SBIR Phase I 2003 Department of DefenseAir Force -
An Innovative Approach to Integrated Thermal Protection Systems and Structures for Hypervelocity Vehicles
SBC: Aero Thermo Technology, Inc Topic: N/AThe thermal protection system (TPS) community is in critical need of a newdesign paradigm if the vision of low maintenance, high sortie rate spacevehicles is to be realized. A revolutionary change is needed in the TPSdesign approach and in the use of innovative materials that can survive longdurations in an extreme heating environment without significant ablation.Low erosion, low conductivity mat ...
SBIR Phase II 2003 Department of DefenseMissile Defense Agency -
All Digital High Speed Visible Imaging Array
SBC: AMAIN ELECTRONICS CO., INC. Topic: N/AA study of the application for a visible light camera based on placing a Delta Sigma modulator at each pixel to provide per pixel A/D showed the potential for superior performance compared to alterate APS designs. It was demonstrated that substantiallyhigher fill factor and smaller pixel size could be achieved using common CMOS technology. Well capacity and linearity of the sensor were also shown ...
SBIR Phase II 2003 Department of DefenseArmy -
Graphical Indes for Aircraft Legacy Data
SBC: Anautics, Inc. Topic: N/AThis is the technical abstract. This is the anticipated benefits
SBIR Phase I 2003 Department of DefenseAir Force