You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Novel High-Conductance Thermal Interface for Aerospace Electronics

    SBC: CREARE LLC            Topic: AF131077

    ABSTRACT: Current separable thermal mechanical interfaces (STMIs) found in advanced digital processing electronics are unable to efficiently remove dissipated heat from the active electronics, limiting electrical performance far below their capability. The standard approach produces high thermal resistance (~1.0°C-in./W) with local variations in excess of +/-25%, severely limiting allowable ele ...

    SBIR Phase I 2013 Department of DefenseAir Force
  2. Cryocooler for Sensor Cooling in Cryo-Vacuum Test Chambers

    SBC: CREARE LLC            Topic: AF131182

    ABSTRACT: The Air Force uses specially designed facilities to perform ground testing of infrared detector focal plane arrays at Arnold Engineering Development Center (AEDC). The current approach for cooling the detectors down to 8 K utilizes liquid helium. The systems to transport and store the liquid helium are expensive to operate and wasteful due to the loss of liquid helium to boiloff. Hel ...

    SBIR Phase I 2013 Department of DefenseAir Force
  3. ULTRA-HIGH PERFOMANCE SOLID-STATE REFRIGERATION USING II-VI LOW DIMENSIONAL STRUCTURE

    SBC: AMETHYST RESEARCH INC            Topic: AF131182

    ABSTRACT: This program targets development of a high-performance thermoelectric (TE) cooler with a figure-of-merit, ZT>3, which greatly exceeds currently available technology. The cooler is fabricated using Group II-VI compound semiconductors, i.e. HgCdSe or HgCdTe, using a low dimensional structure know as a"superlattice"(SL). The proposed TE coolers will operate at temperatures ranging from 5 ...

    SBIR Phase I 2013 Department of DefenseAir Force
  4. Oxidation Resistant Heating Elements for High Temperature Wind Tunnels

    SBC: Plasma Processes, LLC            Topic: AF131189

    ABSTRACT: High temperature wind tunnels are needed to replicate the environment vehicles will experience during high Mach number flight. Of particular interest are sustained airflow temperatures of 2800 F. Although this level of performance has been obtained by two of NASA's wind tunnel facilities (i.e. High Temperature Tunnel (HTT) at Langley Research Center and Hypersonic Tunnel Facility ...

    SBIR Phase I 2013 Department of DefenseAir Force
  5. Cryodeposit Mitigation and Removal Techniques for Radiometric Calibration Chambers

    SBC: OPTICAL SCIENCES CORPORATION            Topic: AF12BT10

    ABSTRACT: Optical Sciences Corporation (OSC) and the University of Alabama in Huntsville"s Center for Applied Optics (UAH/CAO) will demonstrate the feasibility and present a plan for developing optical instrumentation for the monitoring, mitigation, and removal of cryodeposits accumulated on optical and mechanical surfaces in cryogenic-vacuum radiometric calibration chambers. OSC will investigat ...

    STTR Phase I 2013 Department of DefenseAir Force
  6. METSI: Metadata Establishing Trust in SOA-based Information

    SBC: CFD RESEARCH CORPORATION            Topic: AF112041

    ABSTRACT: Operating in a Service-Oriented Architecture (SOA) environment is risky because there is limited ability to gauge the quality of information, especially information that has been transformed multiple times as it flows within the SOA. To address this problem, CFDRC built METSI (Metadata Establishing Trust in SOA-based Information) to quantify the Quality of Information (QoI) using seven ...

    SBIR Phase II 2013 Department of DefenseAir Force
  7. Integrated or Fused Multi-spectral Sensor Technologies for Missile Warning Sensors (MWS), Hostile Fire Indication (HFI), and Laser Warning (LW)

    SBC: OCEANIT LABORATORIES INC            Topic: AF112132

    ABSTRACT: Oceanit will develop a working prototype module that will undergo testing with each category of Threat engagement. We will articulate a clear pathway forward to productization to include package design concepts that meet tactical and environmental considerations. BENEFIT: Dual Use (Military & Commercial) Applications: Production development program for a sensor system to enhance or re ...

    SBIR Phase II 2013 Department of DefenseAir Force
  8. Improved Mass Balancing of Turbo Machine Rotors

    SBC: CREARE LLC            Topic: AF112166

    ABSTRACT: The efficient, effective balancing of jet engine rotors and subassemblies continues to be a challenge for key aerospace applications. While manufacturing methods for balancing have improved significantly over the last ten years, measurement methods and procedures and fixturing have not advanced at the same pace. Modern jet engines require multiple parts and subassemblies to be balance ...

    SBIR Phase II 2013 Department of DefenseAir Force
  9. Strategically Radiation-Hardened Star Tracker

    SBC: SCIENTIC INC            Topic: AF103114

    ABSTRACT: In today"s limited government budget environment, the push is towards smaller spacecraft with more rapid development times (

    SBIR Phase II 2013 Department of DefenseAir Force
  10. Hole-to-Edge Measurement Tool

    SBC: CREARE LLC            Topic: AF112122

    ABSTRACT: Accurate determination of the distance between fastener holes and part edges is critical to ensure structural integrity in military aircraft. These measurements are particularly important as part flanges are reduced and tolerances are tightened to save weight and increase performance. Current measurement methods rely on manual calipers and are extremely time consuming, labor intensive ...

    SBIR Phase II 2013 Department of DefenseAir Force
US Flag An Official Website of the United States Government