List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. THE PRIMARY OBJECTIVE OF THIS PROJECT IS TO PROVIDE THE DESIGNER OF AN TI-RADIATION HOMING MISSILES WITH THE INFORMATION NECESSARY TO STRUCTURE FUTURE STUDIES AND TECHNOLOGY PROGRAMS AIMED AT DEVELOPING AN ANTI- RADIATION MISSILE CAPABLE OF HOMING ON

    SBC: Cas Inc.            Topic: N/A

    THE PRIMARY OBJECTIVE OF THIS PROJECT IS TO PROVIDE THE DESIGNER OF AN TI-RADIATION HOMING MISSILES WITH THE INFORMATION NECESSARY TO STRUCTURE FUTURE STUDIES AND TECHNOLOGY PROGRAMS AIMED AT DEVELOPING AN ANTI- RADIATION MISSILE CAPABLE OF HOMING ON THREAT RADIATION MISSILE CAPABLE OF HOMING THREAT RADARS UTILIZING SPREAD SPECTRUM TECHNIQUES. THIS INVOLVES THE FOLLOWING TWO TASKS: 1. DEFINE THE C ...

    SBIR Phase I 1983 Department of DefenseAir Force
  2. IMPROVEMENTS, MAINTENANCE AND REFURBISHMENT

    SBC: SPECTRA RESEARCH, INC.            Topic: N/A

    THIS RESEARCH ADDRESSES TECHNIQUES AND MATERIALS FOR ON-ORBIT MAINTENANCE AND REFURBISHMENT OF THERMAL CONTROL SURFACE COATINGS USED ON LONG-LIFE SPACECRAFT. IN MANY CASES, CONSERVATIVE ASSUMPTIONS ON THE EFFECTS OF LONG-TERM DEGRADATION HAVE DRIVEN THE DESIGN OF SPACECRAFT THERMAL SYSTEMS TOWARD OVER CAPACITY WHICH RESULTS IN WEIGHT, SIZE, COMPLEXITY, AND COST PENALTIES. IF CRITICAL SURFACES COUL ...

    SBIR Phase I 1983 Department of DefenseAir Force
  3. RESEARCH ON LARGE, HIGHLY ACCURATE INFLATABLE REFLECTORS

    SBC: SPECTRA RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1983 Department of DefenseAir Force
  4. Advanced Aluminum Alloy: Extruded Thin Wall Structural Concepts

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The primary objective of this proposed work is to develop a method of producing integrally stiffened, complex shaped monolithic structural components in high strength aluminum alloys at a lower cost and lighter weight than equivalent conventional built-up assemblies. In Phase I the feasibility of attaining this objective will be demonstrated by conducting a series of subscale experiments based upo ...

    SBIR Phase I 1994 Department of DefenseAir Force
  5. Fiber Optic Raman Sensors for the Remote Determination of Composite Chemical Characteristics

    SBC: ADVANCED PROCESSING TECHNOLOGY, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  6. AN INNOVATIVE AIR-TURBO ROCKER (ATR) SCRAMJET PROPULSION SYS AND SUPPORTING DESIGN APPROACH

    SBC: CFD Research Corporation            Topic: N/A

    Development of combined Air-Turbo-Rocket(ATC/Scramjet component technology suitable for numerous USAF propulsion missions is proposed. Preliminary component design will focus on attaining fully throttleable boost and sustain thrust, vehicle speeds from Mach 0 to 8, and range as required. Activities during Phase I include: (1) Generator of an ATR/Scramjet system and component analysis methodology b ...

    SBIR Phase II 1994 Department of DefenseAir Force
  7. Monorotor for Air Turborocket (ATR) Engine

    SBC: CFD Research Corporation            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  8. Improved Assessment of Vestibular Systems by Fuzzy and Neural Hybrid Modeling Techniques

    SBC: CONCEPTUAL MINDWORKS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  9. Advantages of Two-Phase Switched Reluctance Machines for More Electric Aircraft Power Generation

    SBC: ISOTHERMAL SYSTEMS RESEARCH            Topic: N/A

    The current development of an electric power generation system for the More Electric Aircraft (MEA) is based on a low-risk extension of existing three-phase, switched reluctance machine (SRM) technology. This research program proposes to study an alternate two-phase SRM and its associated power-conditioning converter. By the nature of the proposed machine, it has 50% of its stator coils active at ...

    SBIR Phase I 1994 Department of DefenseAir Force
  10. The Development of Auditory ICONS for Representation of Virtual Objects in 3-D Space

    SBC: Dynastat, Inc.            Topic: N/A

    The ability of subjects to localize and identify each member of a set of acoustic signals will be measured. The acoustic signals will be presented in random order at several locations in auditory space, also chosen randomly. The acoustic signals are constructed to maximize the cues they present for localization and identification in that they contain a wide range of frequencies and timing informat ...

    SBIR Phase I 1994 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government