You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Agent Defeat Short Term Neutralization Data Colloction and Modeling

    SBC: AUBURN CHEMICAL CO., INC.            Topic: N/A

    This research will determine extent and nature of the neutralization of bacterial spores when they are exposed, for very short times to high temperatures, pressures, and chemicals important in Agent Defeat weapons.. An exposure system will be constructedcapable of providing the ultra-short exposure times (on the order of ms) that are characteristic of bomb explosions and will be capable of exposi ...

    SBIR Phase II 2003 Department of DefenseAir Force
  2. High Resolution Simulation of Liquid Jet Ejection and Aerosolization for Chemical/Biological Defense

    SBC: CFD RESEARCH CORPORATION            Topic: N/A

    High resolution modeling of the aerosolization process for relatively large liquid jets is needed to quantify the dispersion of hazardous chemical or biological agents from damaged/punctured containers. A second application is the prediction of thedistribution of neutralization agents injected into clouds of hazardous chemical or biological agents. A high fidelity model is needed to provide accura ...

    SBIR Phase II 2003 Department of DefenseAir Force
  3. Time-Exposure Acoustics for Imaging Underground Structures

    SBC: GEOPHEX, LTD.            Topic: N/A

    We propose to further develop a new technique for imaging underground facilities based on the passive monitoring of acoustic emissions from both stationary and moving equipment within such facilities. It is well known that all mechanical devices, such asmotors, gears, etc, emit acoustic signals. It is possible to identify an acoustic source based on its noise spectrum. During Phase I, we have demo ...

    STTR Phase II 2003 Department of DefenseAir Force
  4. Ecologically Benign Corrosion Protection by Stratified Coatings

    SBC: Nomadics, Inc.            Topic: N/A

    Military aircraft are largely constructed from special aluminum alloys, which typically have secondary precipitate phases that substantially improve mechanical strength. However, these regions also promote corrosion in such common environmental conditionsas acid rain, saltwater, and thermal cycling. The problem is significant enough that the U.S. Air Force expends approximately $1 billion per year ...

    STTR Phase II 2003 Department of DefenseAir Force
  5. Attitude Control System for Laser Lightcraft

    SBC: POLARIS SENSOR TECHNOLOGIES INC            Topic: N/A

    Reducing the cost of launching payloads into low earth orbit by a factor of 10 or 100 requires revolutionary changes in launching architectures. The Laser Lightcraft holds the potential for such savings by placing the bulk of the propulsion system on theground by using a ground-based laser to provide the impulse for lifting the payload. Attitude control for the Lightcraft is critical. This Phas ...

    SBIR Phase II 2003 Department of DefenseAir Force
  6. Novel High Current Switch for Spacecraft Power Bus Control

    SBC: POWER TECHNOLOGY SERVICES (PTS), INC.            Topic: N/A

    The proposed semiconductor-insulator-semiconductor (SIS) is herein defined as a structure consisting of two semiconductor layers separated by an insulator. PTS proposes such a SIS structure as a latching on/off switch consisting of widebandgap (WBG)semiconductors as cathodes and anodes. The cathode will be designed as an efficient electron gun or cathode. The anode will be designed as both an effi ...

    SBIR Phase II 2003 Department of DefenseAir Force
  7. AN INNOVATIVE AIR-TURBO ROCKER (ATR) SCRAMJET PROPULSION SYS AND SUPPORTING DESIGN APPROACH

    SBC: CFD RESEARCH CORPORATION            Topic: N/A

    Development of combined Air-Turbo-Rocket(ATC/Scramjet component technology suitable for numerous USAF propulsion missions is proposed. Preliminary component design will focus on attaining fully throttleable boost and sustain thrust, vehicle speeds from Mach 0 to 8, and range as required. Activities during Phase I include: (1) Generator of an ATR/Scramjet system and component analysis methodology b ...

    SBIR Phase II 1994 Department of DefenseAir Force
  8. WHOLE BODY SURFACE SCANNER FOR DESIGN OF PROTECTIVE EQUIPMENT

    SBC: Rose Imaging            Topic: N/A

    We propose to design, implement and test the feasibility of a full body surface digitizing system to be used for anthropometric studies and design of protective equipment. Resolution, speed, coverage and accuracy of three dimensional (3D) optical surface scanning will be defined. A generic whole body scanner will be designed, and a software simulation system will be implemented and used to test th ...

    SBIR Phase II 1994 Department of DefenseAir Force
  9. Heated Cloud Rise Model

    SBC: SECA, Inc.            Topic: N/A

    The rise of launch clouds to stabilization is forced by an altitude varying distribution of momention and buoyancy (temperature). In most of the plume, the temperature excess over that of the atmosphere is large and the buoyant force accelerates the launch products to "high" altitudes. The acceleration is retarded by the exhaust velocity, but augmented strongly by water vapor phase changes and pos ...

    SBIR Phase II 1994 Department of DefenseAir Force
US Flag An Official Website of the United States Government