You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Design Tools for Combustion Stability
SBC: IN SPACE, L.L.C. Topic: AF083112ABSTRACT:A joint experimental and computational project using a carefully designed, flexible test article is proposed to assess the velocity-coupled combustion response of a representative liquid rocket injector element to transverse acoustic disturbances. In the proposed Phase II, the response of an injector flowfield at supercritical pressure conditions will be simulated, measured, and reduced i ...
SBIR Phase II 2015 Department of DefenseAir Force -
Next-Generation Micro-chip Carrier for Cooling of Satellite Payload Electronics
SBC: THERMAVANT TECHNOLOGIES LLC Topic: AF112057ABSTRACT:A chip carrier for high power density electronics made from low CTE materials and embedded with an oscillating heat pipe will be applied to a real world satellite electronics device to transform high heat flux (e.g. 100-300W/cm2) at the device package to a lower heat flux at the heat sink areas - and do so with minimal thermal resistance. Deliverables at conclusion of two-year effort will ...
SBIR Phase II 2015 Department of DefenseAir Force -
Flame-Assisted Flash Sintering for Ceramic-Coated Heat Exchangers
SBC: ENGI-MAT CO Topic: AF121181ABSTRACT:In this Phase II effort, nGimat will utilize its newly-developed FAFS technique to sinter ceramic films to metal substrates.The FAFS method was developed and proved feasible through a Phase I SBIR grant and we will expand our understanding of the technique through thorough R&D in Phase II.Sintered samples will undergo thorough surface and mechanical analysis to validate the FAFS process.S ...
SBIR Phase II 2015 Department of DefenseAir Force -
Surface Treatments for Stainless Steel Actuators
SBC: IBC Materials & Technologies, LLC Topic: AF131202ABSTRACT: Stainless steel ballscrew components, such as those found in landing gear and flap actuators on the C-130 aircraft, experience wear and subsequent failure due to corrosion, contamination and foreign object damage (FOD). High"dither"conditions, where the actuator undergoes a constant short-travel, high-frequency movement to maintain level flight, can also induce wear on actuator ballscr ...
SBIR Phase I 2015 Department of DefenseAir Force -
Bulk Non-Equilibrium Materials by Shockwave Consolidation
SBC: TXL Group, Inc. Topic: AF141006ABSTRACT: Phase 1 research will validate an approach for material synthesis that combines mechanical alloying with explosive powder consolidation to produce bulk materials with novel properties. The main advantage to the approach is that it can be applied to diverse material systems, including the creation of alloys with otherwise insoluble constituents. An additional advantage is that it has a ...
SBIR Phase I 2015 Department of DefenseAir Force -
Residual Stress Determination for Cold Expanded Holes
SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC. Topic: AF141207ABSTRACT: Cold working has been used for holes in aircraft structure to extend fatigue life for decades. This procedure can be used as a terminating action or as an inspection interval extension. To have confidence in the process, the Air Force needs an inspection tool that can conclusively determine of the cold work process has been applied to a hole, and if the results are within process specif ...
SBIR Phase I 2015 Department of DefenseAir Force -
Method for Evaluating Candidates for Additive Manufacturing (AM) Processes
SBC: IMAGINESTICS, LLC Topic: AF141213ABSTRACT: A challenge which continues to present a barrier to the utilization of AM and wide spread adoption is knowing when to use the technology. This is particularly problematic in aerospace and in MRO operations because the technology is still emerging, and knowledgeable, experienced practitioners remain in short supply and will likely remain so until the next generation of technicians and en ...
SBIR Phase I 2015 Department of DefenseAir Force -
Cryogenic-Vacuum Compatible Infrared Scene Projection System (CVC IRSP) Based on the Digital Micromirror Device
SBC: OPTICAL SCIENCES CORPORATION Topic: AF083255ABSTRACT: This document presents Optical Sciences Corporation's SBIR technology transition proposal to complete development of an advanced Cryogenic-Vacuum Compatible Infrared Scene Projector (CVC IRSP) for Wide Field-of-View (WFOV) space sensor testing and to integrate the CVC IRSP into a government owned space simulation chamber. The CVC IRSP will be capable of projecting complex scenes w ...
SBIR Phase II 2015 Department of DefenseAir Force -
Advanced Propulsion and Power Concepts for Large Size Class Unmanned Aerial Systems (UAS)
SBC: ENGINE RESEARCH ASSOCIATES INC Topic: AF131160ABSTRACT: Desired tactical requirements for unmanned aerial systems (UASs) exceed current capabilities for performance, reliability, maintainability, cost and supportability. Mission requirements such as extended endurance, increased power for auxiliary/sensor systems, and low altitude, low speed maneuverability are becoming paramount, specifically, in the 10,000 lb class of vehicles. These desir ...
SBIR Phase II 2015 Department of DefenseAir Force -
Avionics Systems Susceptibility and Risk Analysis Toolkit (ASSURANT)
SBC: KNOWLEDGE BASED SYSTEMS INC Topic: AF151142ABSTRACT: Knowledge Based Systems, Inc. (KBSI) proposes to conduct research leading to the design and development of Avionics Systems Susceptibility and Risk Analysis Toolkit (ASSURANT) and supporting disciplien to enable avionics engineers and cyber defense xperts to comprehensivelyl analyze susceptibility assessment of avionics systems and to determine how mitigation and protection strategies w ...
SBIR Phase I 2015 Department of DefenseAir Force