List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Motion Coupled Virtual Environment (MOCOVE)

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    Accurate Automation Corporation (AAC) and Aviation Microjet Technologies (AMT) USA,have developed preliminary designs for an advanced, low-cost, high thrust-to-weightratio turbojet engine in support of the development of future low cost aerial targetsfor the U.S. Navy under the Target 21 program. The advanced engine design willproduce an increased thrust turbojet and an aft-fan configuration turb ...

    SBIR Phase II 2001 Department of DefenseNavy
  2. 4 Kelvin Refrigerator for Superconducting Electronics

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of DefenseNavy
  3. Plasma Limiter: A Radio Frequency Mitigation Device for Missile Defense Electronics

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    The widespread use of communication devices and radar systems has made our society increasingly vulnerable to disruptive high-power, short-pulse electromagnetic interference (EMI) and high power microwaves (HPM). Significant advances in devices thatproduce these high-power, short pulses have been made in the US and abroad in the past few decades. As a result, the need for devices that can protect ...

    SBIR Phase II 2001 Department of DefenseArmy
  4. Development of Radio Frequency Mitigation Technologies for Missile Defense Electronics

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    Accurate Automation Corporation is proposing the development of a plasma limiter for the protection of sensing electronic equipment from high power EM radiation. The Limiter is essentially a self-breaking, fine-point, electrode placed within the receivingtransmission line. In Phase I, AAC will begin development and testing of the concept in an S-band resonant ring located at Texas Tech University. ...

    SBIR Phase I 2001 Department of DefenseArmy
  5. Enhanced Turbojet Inlet Injection

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N/A

    Accurate Automation Corporation (AAC) proposes to develop an analytical andexperimental database that demonstrates the basic feasibility of inlet injection ofoxidizer in turbojet engines for turbojet acceleration. This will enable operation ofconventional turbojets to higher Mach numbers, to higher speeds, and to higheraltitudes than they are current capable. This is a step in using the nation'si ...

    SBIR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
  6. Decontamination Using the One Atmosphere Uniform Glow Discharge Cold Plasma

    SBC: Atmospheric Glow Technologies            Topic: N/A

    Atmospheric Glow Technologies (A-G Tech) proposes to develop an innovative mobile Atmospheric Plasma Decon (APD) System based upon the patented One Atmosphere Uniform Glow Discharge Plasma (OAUGDP) technology. This advanced system will be a deployablemilitary protection system that will decontaminate highly toxic chemicals and microorganisms on sensitive equipment, personnel protective equipment, ...

    SBIR Phase II 2001 Department of DefenseArmy
  7. Decontamination using a One Atmosphere Uniform Glow Discharge Cold Plasma

    SBC: Atmospheric Glow Technologies            Topic: N/A

    Atmospheric Glow Technologies proposes to develop an innovative Mobile AtmosphericGlow Decontamination (MAGDEC) system based upon the patented One Atmosphere UniformGlow Discharge Plasma (OAUGDP) technology. This advanced system will be adeployablemilitary protection system that will decontaminate highly toxic chemicals andmicroorganisms on sensitive equipment, personnel protective equipment, and ...

    SBIR Phase I 2001 Department of DefenseArmy
  8. Miniature Compliant Spatial Parallel Manipulators

    SBC: DYNAMIC STRUCTURES AND MATERIALS, LLC            Topic: N/A

    An innovative solution for the design of solid-state, spatial, scaleable high-performance active mechanisms is proposed. When developed, this device class will find use in various military, commercial and medical applications to provide mobile controlsurfaces for manipulating, pointing and tracking tasks. The first target application is a high resolution (

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  9. PIEZOELECTRIC STEP AND REPEAT HYDRAULIC MOTOR

    SBC: DYNAMIC STRUCTURES AND MATERIALS, LLC            Topic: N/A

    The Phase II development of the hybrid piezoelectric

    STTR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
  10. Validation and Numerical Testing of Turbine Augmentors Combustion Computational Modeling

    SBC: FICS, LLC            Topic: N/A

    Technical Abstract: The objective of this proposal is to demonstrate the feasibilityof integrating numerical testing with benchmark measurements for developing a validated accurate numerical code for turbine augmentor combustion modeling.1- Feasibility of using our FPVortex code, that has been used in similar applications with proven record, for additional simulations will be studied. The code wil ...

    SBIR Phase I 2001 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government