List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Development of Explosive Feedstock for Commercial-off-the-Shelf (COTS) 3D Printers

    SBC: E&G Associates, Inc.            Topic: N171060

    Traditional manufacturing methods for producing warheads, propellants, and pyrotechnic systems are timely and costly. Additive manufacturing (AM) approaches offer one path of alternative manufacturing technologies. Among various technologies, powder bed fusion (PBF) is one promising approach. Hewlett Packards Multi-Jet Fusion printers utilize a unique PBF process that presents a desirable solution ...

    SBIR Phase II 2019 Department of DefenseNavy
  2. Submarine Shipboard Power Supply Bridge

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: N171075

    The objective of this effort is to construct and test a 40 kW UPS with at least 100ms of holdup time, integrated into a standard 19 inch rack mount enclosure with 4U (7 inch) height, and designed to meet electrical and mechanical/shock specifications required for naval shipboard application. Traditional UPS applications are typically not optimized for weight and volume, and utilize bulky lead-acid ...

    SBIR Phase II 2019 Department of DefenseNavy
  3. Reduction/Elimination of Unsteady Aerodynamic Loads on Model and Balance Support Systems in Large Scale Wind Tunnels

    SBC: FICS, LLC            Topic: AF171008

    This proposed effort is seeking continued SBIR Phase II funding support to further develop the various design features of our Phase I balance Damping and Damage Prevention System, DDPS, feasibility demonstration technology.Continued support is needed for further development including software development for integrating the automatic control implementation in the DDPS as a smart interface.The smar ...

    SBIR Phase II 2019 Department of DefenseAir Force
  4. Black Box RF Sat-Link for Mission Success, Risk Mitigation, and Space Debris

    SBC: NearSpace Launch            Topic: AF183005

    The proposed Phase 2 NSL Black Box is a redundant radio link connected through the $2B Globalstar commercial Sat-phone constellation and a timely AF Dual-Purpose Technology. The miniaturized and autonomous Black Box (BB) solution with its 24/7 global coverage (latency of seconds) can greatly increase performance and response, reduce risk, and help with orbital debris tracking. The Black Box techno ...

    SBIR Phase II 2019 Department of DefenseAir Force
  5. Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions with a Clear Air Force Stakeholder Need (RAPID)

    SBC: Trek10 Inc.            Topic: AF183005

    Legacy Air Force IT systems behind the Operational Training Infrastructure (OTI) are inhibiting warfighter readiness due to lack of interoperability and flexibility, high costs, and need for manual processes. Next generation cloud computing that focuses on cloud-native, serverless designs will enable the Air Force to embrace agility, security, scalability, and lower costs to modernize the OTI.Trek ...

    SBIR Phase II 2019 Department of DefenseAir Force
  6. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  7. Rational Design of sub-100 nm Polystyrene Particles with a Low Coefficient of Variation in Size

    SBC: Tetramer Technologies,L.L.C.            Topic: NA

    During this Phase II SBIR development program, Tetramer Technologies will develop highlymonodisperse 100-nm and sub-100-nm diameter nanoparticles for use as latex size standards. Highlymonodisperse nanoparticle latexes are needed for improved calibration of electron microscopes, lightscatteringparticle sizing instruments, atomic force microscopes, and particle counters/contamination monitors used ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  8. Reduced Cavitation, High Efficiency Outboard Propulsors for Small Planing Craft

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N17AT019

    The Candent Technologies Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a bolt on assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsion system inc ...

    STTR Phase II 2018 Department of DefenseNavy
  9. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  10. Advanced Durability Systems for Unmanned Aerial Vehicle Propulsion

    SBC: IBC Materials & Technologies, LLC            Topic: SOCOM163002

    Group 2-3 UAS engines have low mean time between overhauls (MTBOs), often with as little as 200-400 hours before maintenance must be conducted.This leads to significant maintenance cost and logistics tail for deployed operations.Two-stroke piston and rotary engines for Group 2-3 platforms have common maintenance drivers such as carbon fouling, and wear of cylinders, housings and bearings.Phase I r ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government