You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
High Power Density, High Efficiency Advanced Generator for DEW Systems
SBC: CANDENT TECHNOLOGIES INCORPORATED Topic: N132086Solid state RF and millimeter wave weapons systems require substantial power to operate. Pure solid state systems have limited energy density and require charging over the typical use cycle. The directed energy system must be compact enough to mount on a vehicle such as a HMMWV, a small trailer or a structure such as found within an embassy compound. Current power systems are much too large and he ...
SBIR Phase II 2015 Department of DefenseNavy -
Mashalator SSP2
SBC: Bashpole Software, Inc. Topic: SB092007The proposed effort will expand on the previous efforts data mashing technology development to enable it to handle scenarios that are simultaneously more complicated and more dependent on high accuracy. This project will fulfill the solicitations Phase II goal, Develop a prototype that demonstrates the efficacy of DATALATOR technology based on Phase I results, data, and analysis. Evaluate the per ...
SBIR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency -
A Universal Device for Performing Cricothyrotomies
SBC: WOLF TECHNICAL SERVICES INC Topic: DHP13015The purpose of this Phase II program is to develop an innovative, low cost, all-in-one surgical instrument for performing cricothyrotomies and managing airway trauma on the battlefield, with improvements aimed at ultimately reducing mortality rates associ
SBIR Phase II 2015 Department of DefenseDefense Health Agency -
Low-loss Optical Polymer Materials in Multi-kilogram Quantities for Optical Lens Development
SBC: TETRAMER TECHNOLOGIES LLC Topic: N132137In this Phase II SBIR program, Tetramer Technologies will develop new, commercially attractive, thermoplastic optical polymers that have ultra-low scattering losses for use in diffraction-limited optical lenses. The value proposition to the customer using optical components made from Tetramer polymers will be decreased scattering of light transmitted through the polymer lens, resulting in smaller ...
SBIR Phase II 2015 Department of DefenseNavy -
Surface Treatments for Stainless Steel Actuators
SBC: IBC Materials & Technologies, LLC Topic: AF131202ABSTRACT: Stainless steel ballscrew components, such as those found in landing gear and flap actuators on the C-130 aircraft, experience wear and subsequent failure due to corrosion, contamination and foreign object damage (FOD).High dither conditions, caused by constant short-travel, high-frequency movement to maintain level flight, can also induce wear on actuator components.The Air Force and co ...
SBIR Phase II 2015 Department of DefenseAir Force -
Advanced Propulsion and Power Concepts for Large Size Class Unmanned Aerial Systems (UAS)
SBC: ENGINE RESEARCH ASSOCIATES INC Topic: AF131160ABSTRACT: Desired tactical requirements for unmanned aerial systems (UASs) exceed current capabilities for performance, reliability, maintainability, cost and supportability. Mission requirements such as extended endurance, increased power for auxiliary/sensor systems, and low altitude, low speed maneuverability are becoming paramount, specifically, in the 10,000 lb class of vehicles. These desir ...
SBIR Phase II 2015 Department of DefenseAir Force -
Design Tools for Combustion Stability
SBC: IN SPACE, L.L.C. Topic: AF083112ABSTRACT:A joint experimental and computational project using a carefully designed, flexible test article is proposed to assess the velocity-coupled combustion response of a representative liquid rocket injector element to transverse acoustic disturbances. In the proposed Phase II, the response of an injector flowfield at supercritical pressure conditions will be simulated, measured, and reduced i ...
SBIR Phase II 2015 Department of DefenseAir Force -
NOVEL AIR GAP INSULATED PISTON
SBC: ADIABATICS INC Topic: N/AADIABATICS, INC. IS PLEASED TO PROPOSE A RESEARCH PROGRAM TO DESIGN AN OPTIMUM PISTON FOR A HIGH TEMPERATURE MILITARY ENGINE. ADIABATICS, INC. HAS BEEN CONDUCTING A PROGRAM FOR TACOM TITLED "DEVELOPMENT OF TRIBOLOGICAL SYSTEMS AND ADVANCED HIGH TEMPERATURE IN-CYLINDER COMPONENTS FOR ADVANCED HIGH TEMPERATURE DIESEL ENGINES" FOR THE PAST FIVE YEARS. BASED ON OUR EXPERIENCE WITH DESIGNING COMPONENTS ...
SBIR Phase II 1993 Department of DefenseArmy