You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Integrated Power Generation for Small Unmanned Vehicles

    SBC: ENGINE RESEARCH ASSOCIATES INC            Topic: OSD08UM5

    This program will integrate a lightweight, high efficiency alternator with a quiet, fuel efficient and high power density heavy fuel engine. The electrical power source uses a proprietary, compact and very high power-to-weight alternator using rare earth permanent magnets. It is scalable from 0.5 to 70 kW and larger. MAI''s alternator will be integrated with Engine Research Associates (ERA) Mig ...

    SBIR Phase II 2009 Department of DefenseAir Force
  2. Fretting Wear Elimination in Gear Box Housings

    SBC: IBC Materials & Technologies, LLC            Topic: N/A

    A new high-performance anti-wear coating is being developed under an SBIR program with the Air Force Research Laboratorys Materials Directorate for the Joint Strike Fighter. This coating is based on the Micro-Plasma Oxidation process, which is a high-voltage electrochemical process of oxidation which creates micro discharges on the surface of the part immersed in an electrolyte. This results in th ...

    SBIR Phase II 2009 Department of DefenseAir Force
  3. High-Strength Low-Cost Polymer Fibers for Protective Clothing and Equipment, Shelters and Airdrop Equipment

    SBC: INNEGRITY LLC            Topic: A06171

    The goal of this SBIR Phase II project is to test develop high-strength, low-cost fibers for protective clothing and equipment, shelters and airdrop equipment using commodity olefin polymer materials in a unique fiber production process.

    SBIR Phase II 2009 Department of DefenseArmy
  4. COMPREHENSIVE JP-8 MECHANISM FOR VITIATED FLOWS

    SBC: INNOVATIVE ENERGY SOLUTION            Topic: AF081057

    Despite the importance of jet fighter afterburner designs, there exists very little data on the majority of the individual components of jet fuel, especially JP-8, to enable development of a detailed kinetic mechanism. Although the Multi University Research Initiative program has been initiated for that purpose, it is oriented for the main engine combustor where the process is different from after ...

    SBIR Phase II 2009 Department of DefenseAir Force
  5. High Energy Laser Component Technology for Eye-Safer Fiber Lasers

    SBC: KIGRE, INC.            Topic: A08137

    Traditional diode end pumped single mode fiber laser designs are limited in terms laser power pumping and energy extraction. Double clad large mode area fibers are easier to scale up and typically utilize fiber delivered diode pumping at various laser gain length intervals in order to overcome fiber aperture power density limitations. Even with such improvements, current high power fiber lasers ...

    SBIR Phase II 2009 Department of DefenseArmy
  6. Algorithm Development for Reconfigurable Computing Architectures

    SBC: MNB TECHNOLOGIES, INC.            Topic: AF07T017

    High performance reconfigurable computing (HPRC) is an expanding technology offering workstations and small clusters performance levels previously reserved for large-scale systems populating the Supercomputing 500 list. However, the lack of open-source libraries of generically applicable numeric methods (i.e. BLAS, LAPACK, Numeric Recipes, etc.) optimized for FPGA embodiment has hindered adoption ...

    STTR Phase II 2009 Department of DefenseAir Force
  7. Modeling Tools for Two-Phase Electronics Cooling Systems

    SBC: Mudawar Thermal System Inc            Topic: N07T029

    The primary objective of the proposed Phase II study will be to develop fast and accurate computational tools for the design of two-phase cooling hardware for high-flux defense electronics. These tools will be developed for systems utilizing three different cooling schemes: micro-channel cooling, spray cooling and jet-impingement cooling. The proposed tools will incorporate physics-based models ...

    STTR Phase II 2009 Department of DefenseNavy
  8. Advanced Heat Exchanger (HEX) Scaling Methodologies for High-Performance Aircraft

    SBC: PC Krause And Associates, Inc.            Topic: AF073050

    The current thermal management effort for high performance aircraft focuses much attention on more efficient energy rejection through the development of advanced heat exchanger technologies.  PC Krause and Associates (PCKA) is currently filling a much-needed gap of scaling and performance knowledge in the Air Force Phase I SBIR effort.  3-D computational fluid dynamics models have been construct ...

    SBIR Phase II 2009 Department of DefenseAir Force
  9. Bulk Composite Materials for Detection of Gamma Radiation

    SBC: Tetramer Technologies,L.L.C.            Topic: DTRA08005

    The objective of this proposal is to develop enabling technologies for the production of bulk scintillating nanocomposites that have the gamma radiation detection properties of single crystal NaI but with the manufacturability of plastic scintillators. These performance criteria may be met by developing nanoparticle polymer composites with ultra-high nanoparticle loadings levels in matrix with a h ...

    SBIR Phase II 2009 Department of DefenseDefense Threat Reduction Agency
  10. Hybrid CMOS/Nanodevice Integrated Circuits

    SBC: Sensor Electronic Technology, Inc.            Topic: AF07T025

    We propose to develop a novel hybrid circuit approach combining CMOS and two terminal crosspoint nanodevices with a novel interface consisting of an array of pins with nanometer scale tips. Our CMOL approach will allow the fabrication of ultra-dense integrated circuits (up to 10^12 active devices per cm2) for advanced computing (up to 10^20 operation per cm2 per second), information storage and se ...

    STTR Phase II 2009 Department of DefenseAir Force
US Flag An Official Website of the United States Government