You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Sensor Fusion through Advanced Computing Techniques
SBC: ABTECH CORPORATION Topic: N/AAbTech Corporation proposes to apply its unique abductive information modeling (AIMTM) technology to develop a sensor fusion demonstration for command, control, communication, computer and information systems. Phase I is the necessary and sufficient precursor to an operational disparate sensor fusion for C4I applications. Phase I will show the feasibility of using AIM to model sensor data, threats ...
SBIR Phase II 1997 Department of DefenseNavy -
ModelQuest Satellite Telemetry Anomaly Resolution (MQ STAR)
SBC: ABTECH CORPORATION Topic: N/AThis effort will result in the development of a Satellite Telemetry Anomaly Resolution (STAR) tool that automatically: 1) analyzes historical telemetry data, 2) learns expected signal characteristics for specific telemetry signals using prediction networks¿ (an advanced statistical modeling approach) and innovative case based reasoning (CBR) techniques, and 3) applies these models to detect and ...
SBIR Phase II 1997 Department of DefenseAir Force -
HYDROPHONE MODELLING AND DESIGN FOR LOW COST ACOUSTIC ARRAYS
SBC: Acoustical Research & Applicat Topic: N/ATHIS PROJECT, IF SUCCESSFUL, SHOULD PROVIDE: A GENERAL MODEL AND PROCEDURE FOR USE IN DESIGNING PIEZOELECTRIC SENSORS -HYDROPHONES, ACCELEROMETERS, ETC.--WHICH WOULD ENABLE THE DESIGNER OF A SENSOR TO PREDICT ITS SENSITIVITIES TO THE STIMULUS FOR WHICH IT WAS DESIGNED, AND TO EXTRANEOUS STIMULI WHICH GENERATE INTERFERING SIGNALS; INFORMATION ON HOW THE CHOICE OF PIEZOELECTRIC MATERIAL AND MODE OF ...
SBIR Phase II 1989 Department of DefenseNavy -
STOICHIOMETRIC DIESEL ENGINE
SBC: ADIABATICS INC Topic: N/AA FEASIBILITY STUDY ON THE DEVELOPMENT OF A STOICHIOMETRIC DIESEL ENGINE IS PROPOSED USING THE THERMAL IGNITION COMBUSTION CHAMBER. THE ADIABATIC DIESEL ENGINE WITHOUT WATER OR AIR COOLING ALLOWS THE THERMAL IGNITION CHAMBER TO STORE HEAT DURING COMBUSTION AND RELEASE THE ENERGY FOR IGNITION IN THE FOLLOWING CYCLE. INJECTION OF FUEL ON TO 1800-2000 DEG. F WALL TEMPERATURE WILL PREPARE THE FUEL FOR ...
SBIR Phase II 1989 Department of DefenseArmy -
High Pressure Fuel Injected Stoichiometric Engine System
SBC: ADIABATICS INC Topic: N/ATwo major objectives of the U.S. Army is to increase power density and reduce heat rejection. Reducing airflow requirements of the deisel engine will contribute toward both of these objectives. Reducing air-fuel ratio requirements is one of the major cost effective approaches available for significantly increasing power output and reducing heat rejection in today's power output diesel engine. Po ...
SBIR Phase II 1997 Department of DefenseArmy -
Advanced Ground Vehicle Propulsion Technology- High Temperature Tribological Considerations
SBC: ADIABATICS INC Topic: N/AThe primary roadblock to the success of the high output Low Heat Rejection (LHR) diesel engine requiring little or no water cooling is the lack of effective liquid lubrication where target top ring reversal (TRR) temperatures between the cylinder liner and piston ring approach 1000 degrees F. Adiabatics, Inc. has developed a Thermo-sealed plasma sprayed Fe2O3 tribological coating which provides e ...
SBIR Phase II 1997 Department of DefenseArmy -
Experimental and Analytical Evaluation of Solid Fueled Gas Generator Effluents Suitable for High Mach Combined Cycle PDE Applications
SBC: Adroit Systems, Inc. Topic: N/AThe topic presented in this proposal has direct application to the development and demonstration of high Mach combined cycle engines. The proposed effort would allow the coupling of a pulse detonation engine (PDE) with a realistic solid fueled gas generator. The specific key technical problems identified in this proposal are the absence of experimental gas generator effluent detonability informat ...
SBIR Phase II 1997 Department of DefenseAir Force -
An Innovative Pulse Detonation Rocket Engine
SBC: Adroit Systems, Inc. Topic: N/AThe opportunity addressed in this proposal is an innovative pulse detonation rocket engine (PDRE) which could significantly out-perform current state-of-the-art chemical rocket propulsion systems. The innovation is based in a novel combustion concept developed by Adroit Systems, Inc. (ASI) in the area of airbreathing pulse detonation propulsion. The concept relies on detonation combustion, as op ...
SBIR Phase II 1997 Department of DefenseAir Force -
Adv Tech for Minimization of Deflagration to Detonation Transition Distance in PDE Applications
SBC: Adroit Systems, Inc. Topic: N/AAdroit Systems Inc. (ASI) proposes to develop an innovative concept which reduces the required volume of predetonator mixture in pulse detonation engines (PDEs). The propulsive efficiency of the PDE hinges on the ability to quickly initiate a detonation in a fuel/air mixture. Since most fuel/air mixtures are difficult to detonate, an easily detonable predetonator mixture is typically ...
SBIR Phase II 1997 Department of DefenseAir Force -
A Novel Non-Lethal Effects Device
SBC: Adroit Systems, Inc. Topic: N/AThe topic presented in this proposal has direct application to the development of non-lethal devices capable of temporarily incapacitating personnel, controlling crowds, immobilizing small vehicles, and other applications where a controlled amount of acoustic c energy needs to be delivered a a distance. The proposed effort would determine the characteristic acoustic waveforms and amplitudes gener ...
SBIR Phase II 1997 Department of DefenseArmy