List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. STOICHIOMETRIC DIESEL ENGINE

    SBC: ADIABATICS INCORPORATED            Topic: N/A

    A FEASIBILITY STUDY ON THE DEVELOPMENT OF A STOICHIOMETRIC DIESEL ENGINE IS PROPOSED USING THE THERMAL IGNITION COMBUSTION CHAMBER. THE ADIABATIC DIESEL ENGINE WITHOUT WATER OR AIR COOLING ALLOWS THE THERMAL IGNITION CHAMBER TO STORE HEAT DURING COMBUSTION AND RELEASE THE ENERGY FOR IGNITION IN THE FOLLOWING CYCLE. INJECTION OF FUEL ON TO 1800-2000 DEG. F WALL TEMPERATURE WILL PREPARE THE FUEL FOR ...

    SBIR Phase II 1989 Department of DefenseArmy
  2. Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction

    SBC: ADIABATICS INCORPORATED            Topic: A04250

    The future generation of both military and commercial diesel engines will operate at significantly higher temperatures and pressures than today’s engines. The future combat system diesel engine operating parameters demand significant design improvement of power cylinder insulation. Increased cylinder pressure and reduced cooling requirements, heat energy recovery in the exhaust gas by turbocha ...

    SBIR Phase II 2006 Department of DefenseArmy
  3. Compact Turbochargers for High Power Density Diesel Engines

    SBC: ADIABATICS INCORPORATED            Topic: A05237

    A high-power density, Low Heat Rejection (LHR) diesel engine design for both traditional and hybrid Future Combat System (FCS) vehicle configurations is being proposed. Work under this proposal includes application of LHR engine technology to improve power density and life cycle durability of a military commercial diesel engine. This engine is General Engine Products, LLC.’s Optimizer 6500 HUM ...

    SBIR Phase II 2006 Department of DefenseArmy
  4. Coupled Multibody Dynamics and Computational Fluid Dynamics Simulation of Liquid Sloshing for Tanker Vehicles

    SBC: Advanced Science And Automation Corp            Topic: A04238

    The objective of this proposal is to develop a tool for time-accurate simulation of coupled CFD and multibody dynamics of tanker vehicles and sloshing liquid payloads, that includes integrated pre-processor, solver, and post-processor. The pre-processor allows constructing an object-oriented hierarchical "preliminary" model of the vehicle, tank, and terrain. The pre-processor includes a model tree ...

    SBIR Phase II 2006 Department of DefenseArmy
  5. Advanced Stress Measurement Technologies for Small Turbine Engines

    SBC: AERODYN ENGINEERING, INC.            Topic: A04083

    Aerodyn Engineering proposes to develop a new concept in slip ring design that could operate up to 90,000 RPM with 50 contacts (25 channels), be capable of handling temperatures up to 700°F without external cooling support, weigh less than 2 lb, and be designed to directly support new developments in small turbo-shaft engines.

    SBIR Phase II 2006 Department of DefenseArmy
  6. Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction

    SBC: ANALYTICAL ENGINEERING, INC.            Topic: A04250

    The U. S. Army has a need for reliable and durable in-cylinder thermal barrier coatings to reduce high power density diesel engine component structural temperatures and heat rejection. Phase I program bench testing results identified thermal barrier coating topcoat systems that reduced radiant heat transfer by 40 % and improved durability by more than 100 %. Two types of topcoat systems that were ...

    SBIR Phase II 2006 Department of DefenseArmy
  7. Improved Hemorrhage Detection Technology for a Robotic HIFU Manipulator System

    SBC: FOCUS SURGERY INC            Topic: A05T032

    A low-risk, high-confidence, CSTAT-compatible HIFU hemostasis system that can be operated remotely was developed during Phase I to improve battlefield medicine to save lives. The system is based on a 23 channel annular HIFU phased array with a built-in co

    STTR Phase II 2006 Department of DefenseArmy
  8. Microelectronical Devices for the Health Monitoring of Nonstructural Materials

    SBC: INNOVATIVE DESIGN & TECHNOLOGY LTD.            Topic: AF05134

    Our Phase II proposal is to build and further expand on our successes during Phase I of this project and develop micro-electromechanical device-based sensors (MEMS) for in-situ health monitoring and damage detection of coatings and tribological components (i.e. ball and rolling element bearings) for military aircrafts and commercial space systems. The Phase II of our SBIR will include: i) advance ...

    SBIR Phase II 2006 Department of DefenseAir Force
  9. Advanced 10 Kelvin Cryogenic Cooling Component Technology

    SBC: International Mezzo Technologies, Inc.            Topic: MDA04077

    The goal of this project is to demonstrate a recuperator with extremely high effectiveness for use in a reverse turbo-Brayton (RTB) cryocooler. The recuperator will offer substantial system weight reduction, volume reduction, and performance increases for a cryocooler that can be used for Block 12 as well as any other space-based cryocooling needs. Advanced micro-manufacturing technology is need ...

    SBIR Phase II 2006 Department of DefenseMissile Defense Agency
  10. Cooling Objectives and Operative Leverage (COOL) Techniques

    SBC: International Mezzo Technologies, Inc.            Topic: A04248

    The objective of this Phase II program is to develop and demonstrate a high performance heat exchanger technology for military ground vehicles such as the up-armored HMMWV. Mezzo will build a heat exchanger that is more compact, provides improved heat transfer performance, and meets the demands of the harsh environments (such as resistance to sand and dirt fouling) to which military vehicles and ...

    SBIR Phase II 2006 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government