You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. An Automated Modeling and Simulation Tool for Lightening the Load of Warfighters

    SBC: VizTek, Inc            Topic: N08T019

    Today’s Warfighter often carries an inordinate load that can lead to injuries and encumbered performance. Equipment is distributed among squad members with little, if any regard for differences in strength and anthropometry. Consequently, the current focus on human-centric design requires a modeling and simulation tool that can reduce the load Warfighters carry and can help distribute equipment ...

    STTR Phase II 2009 Department of DefenseNavy
  2. Non-Destructive Evaluation (NDE) and Testing of Ceramic Armor

    SBC: EVISIVE LLC            Topic: A07186

    This project will develop a field portable nondestructive technique for in-situ monitoring of the health of ceramic armor. The Evisive Scan microwave interference scanning method has been successfully demonstrated in Phase I of the project, where it was demonstrated successfully on Control Specimens and ceramic armor Surrogates designed and fabricated by ARL, and on samples of armor from Stryker ...

    SBIR Phase II 2009 Department of DefenseArmy
  3. Fretting Wear Elimination in Gear Box Housings

    SBC: IBC Materials & Technologies, LLC            Topic: AF05129

    A new high-performance anti-wear coating is being developed under an SBIR program with the Air Force Research Laboratorys Materials Directorate for the Joint Strike Fighter.  This coating is based on the Micro-Plasma Oxidation process, which is a high-voltage electrochemical process of oxidation which creates micro discharges on the surface of the part immersed in an electrolyte.  This results i ...

    SBIR Phase II 2009 Department of DefenseAir Force
  4. SUPPORTED MOLTEN SALT DEHYDROGENTATION OF METHANOL

    SBC: Accel Catalysis Inc.            Topic: N/A

    THE PROPOSED WORK INVOLVES APPLICATION OF SUPPORTED MOLTEN SALT CATALYSIS TO THE CATALYTIC ENDOTHERMIC DEHYDROGENATION OF METHANOL. THE CATALYSTS OF INTEREST INCLUDE EUTECTICS COMPOSED OF CU(+1) SALTS WITH HOMOGENEOUSLY DISPERSED ZN(+2) SALTS OR HETEROGENEOUSLY DISPERSED ZNO. IN ADDITION, THE STUDY WILL INCLUDE EVALUATION OF HETEROGENEOUS DISPERSIONS OF METALLIC PALLADIUM IN BINARY AND TERNARY EUT ...

    SBIR Phase II 1989 Department of DefenseAir Force
  5. STOICHIOMETRIC DIESEL ENGINE

    SBC: ADIABATICS INC            Topic: N/A

    A FEASIBILITY STUDY ON THE DEVELOPMENT OF A STOICHIOMETRIC DIESEL ENGINE IS PROPOSED USING THE THERMAL IGNITION COMBUSTION CHAMBER. THE ADIABATIC DIESEL ENGINE WITHOUT WATER OR AIR COOLING ALLOWS THE THERMAL IGNITION CHAMBER TO STORE HEAT DURING COMBUSTION AND RELEASE THE ENERGY FOR IGNITION IN THE FOLLOWING CYCLE. INJECTION OF FUEL ON TO 1800-2000 DEG. F WALL TEMPERATURE WILL PREPARE THE FUEL FOR ...

    SBIR Phase II 1989 Department of DefenseArmy
  6. Physiological-based Tools for Virtual Environment Fidelity Design Guidance

    SBC: ADVANCED INFONEERING, INC.            Topic: N07T028

    This proposal describes the proposed implementation of the concept of the Quality of Training Effectiveness Assessment (QTEA) system. This concept was developed in Phase I (N074-028-0065). Currently, VE design is guided by subjective design models that involve multiple design iterations and focus on trial and error. Our approach is innovative and new because it quantifies VE fidelity requirements ...

    STTR Phase II 2009 Department of DefenseNavy
  7. Improved Venezuelan equine encephalitis virus vaccines

    SBC: BIOPROTECTION SYSTEMS CORP.            Topic: CBD08105

    We hypothesize that the application of the broad-spectrum immune-stimulatory and -modulatory HyperAcute alphaGal Adjuvant Technology will enhance the potency and effectiveness of VEEV vaccine candidates. To complement the exciting preclinical and clinical results obtained with alphaGal-modified anti-cancer vaccines, and preclinical studies with both Ebolavirus and Influenza virus, we will apply th ...

    SBIR Phase II 2009 Department of DefenseOffice for Chemical and Biological Defense
  8. Integrated Power Generation for Small Unmanned Vehicles

    SBC: ENGINE RESEARCH ASSOCIATES INC            Topic: OSD08UM5

    This program will integrate a lightweight, high efficiency alternator with a quiet, fuel efficient and high power density heavy fuel engine. The electrical power source uses a proprietary, compact and very high power-to-weight alternator using rare earth permanent magnets. It is scalable from 0.5 to 70 kW and larger. MAI''s alternator will be integrated with Engine Research Associates (ERA) Mig ...

    SBIR Phase II 2009 Department of DefenseAir Force
  9. Low-cost, low frequency slotted cylinder transducer

    SBC: Etrema Products, Inc.            Topic: N07T035

    In the Phase I effort a Galfenol-based slotted cylinder projector (SCP) device was conceived utilizing an existing PZT SCP design and analytical modeling to determine the geometry requirements necessary to achieve the performance specs: 210 dB source level, 750 Hz resonance frequency, 200 Hz bandwidth. The final form factor was a Galfenol SCP with overall dimensions of 7.75” diameter x 12” len ...

    STTR Phase II 2009 Department of DefenseNavy
  10. Non-Destructive Evaluation (NDE) and Testing of Ceramic Armor

    SBC: EVISIVE LLC            Topic: N/A

    This project will develop a field portable nondestructive technique for in-situ monitoring of the health of ceramic armor. The Evisive Scan microwave interference scanning method has been successfully demonstrated in Phase I of the project, where it was demonstrated successfully on Control Specimens and ceramic armor Surrogates designed and fabricated by ARL, and on samples of armor from Stryker ...

    SBIR Phase II 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government