List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Modular Motor Drive with Programming and Configuration Tools for the Development of Small Aircraft Electric Power and Propulsion Systems

    SBC: PC Krause And Associates, Inc.            Topic: AF151070

    Unmanned Air Vehicle (UAV) developers have limited marketplace options for motor speed controllers.The largest commercial controllers are generally limited to below 12 kW and battery voltages of less than 50 V, Although these are well suited to 800 Class helicopters and Giant scale fixed-wing aircraft, they are not powerful enough for larger UAV development.A few high-power options exist up to 25 ...

    SBIR Phase II 2016 Department of DefenseAir Force
  2. Tissue Engineered Vascular Graft

    SBC: TECHSHOT, INC.            Topic: DHP14009

    Techshot is pleased to provide this phase II proposal to continue our exciting scaffold development work in creating a Tissue Engineered Vascular Graft (TEVG).This off the shelf conduit will be capable of being combined with the patients own cells either at the time of surgery or by healing and remodeling in situ to provide a long term solution to revascularization due to traumatic injury.We inten ...

    SBIR Phase II 2016 Department of DefenseDefense Health Program
  3. Advanced Durability Systems for Unmanned Aerial Vehicle Propulsion

    SBC: IBC Materials & Technologies, LLC            Topic: SOCOM163002

    Group 2-3 UAS engines have low mean time between overhauls (MTBOs), often with as little as 200-400 hours before maintenance must be conducted.This leads to significant maintenance cost and logistics tail for deployed operations.Two-stroke piston and rotary engines for Group 2-3 platforms have common maintenance drivers such as carbon fouling, and wear of cylinders, housings and bearings.Phase I r ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  4. Reduced Cavitation, High Efficiency Outboard Propulsors for Small Planing Craft

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N17AT019

    The Candent Technologies Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a bolt on assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsion system inc ...

    STTR Phase II 2018 Department of DefenseNavy
  5. Method for Evaluating Candidates for Additive Manufacturing (AM) Processes

    SBC: IMAGINESTICS, LLC            Topic: AF141213

    ABSTRACT: A challenge which continues to present a barrier to the utilization of AM and wide spread adoption is knowing when to use the technology. This is particularly problematic in aerospace and in MRO operations because the technology is still emerging, and knowledgeable, experienced practitioners remain in short supply and will likely remain so until the next generation of technicians and eng ...

    SBIR Phase II 2016 Department of DefenseAir Force
  6. Generator Power Recapture

    SBC: PC Krause And Associates, Inc.            Topic: AF161008

    The Air Force rebuilds and tests many aircraft and ground-power generators each year, involving many hours of loaded run-time with dissipative load banks. To improve facility energy efficiency and to have a positive environmental impact, a regenerative ac/dc load bank is proposed to push power from generator testing back to the electric grid. The proposed generator power recapture unit (GPRU) will ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Gallium Nitride (GaN) based 28 VDC Circuit Protection and Distribution

    SBC: PC Krause And Associates, Inc.            Topic: A16087

    Recent advances in commercially available Gallium Nitride (GaN) MOSFETS offer significant advantages compared to traditional Silicon devices for circuit protection and power distribution applications including the availability of devices in advanced packaging options, lower on-state resistances, and improved performance in harsh electromagnetic environments.To demonstrate these advantages of GaN i ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. STOICHIOMETRIC DIESEL ENGINE

    SBC: ADIABATICS INCORPORATED            Topic: N/A

    A FEASIBILITY STUDY ON THE DEVELOPMENT OF A STOICHIOMETRIC DIESEL ENGINE IS PROPOSED USING THE THERMAL IGNITION COMBUSTION CHAMBER. THE ADIABATIC DIESEL ENGINE WITHOUT WATER OR AIR COOLING ALLOWS THE THERMAL IGNITION CHAMBER TO STORE HEAT DURING COMBUSTION AND RELEASE THE ENERGY FOR IGNITION IN THE FOLLOWING CYCLE. INJECTION OF FUEL ON TO 1800-2000 DEG. F WALL TEMPERATURE WILL PREPARE THE FUEL FOR ...

    SBIR Phase II 1989 Department of DefenseArmy
  9. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  10. High Density, High Efficiency Electrical Power Generation

    SBC: PC Krause And Associates, Inc.            Topic: N103207

    The movement to more-electric architectures during the past decade in military and commercial airborne systems continues to increase the complexity of designing and specifying the electrical power system in such architectures. In particular, electrical starter/generators (ES/G) on airborne systems have become much more complex in terms of design due to growth in electrical power and energy require ...

    SBIR Phase II 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government