List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Submarine Shipboard Power Supply Bridge

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: N171075

    The objective of this effort is to construct and test a 40 kW UPS with at least 100ms of holdup time, integrated into a standard 19 inch rack mount enclosure with 4U (7 inch) height, and designed to meet electrical and mechanical/shock specifications required for naval shipboard application. Traditional UPS applications are typically not optimized for weight and volume, and utilize bulky lead-acid ...

    SBIR Phase II 2019 Department of DefenseNavy
  2. Deployable Multi-Band Radio Base Station

    SBC: W5 TECHNOLOGIES INC            Topic: N122148

    The overall objective of this project is to provide NAWCAD with a local and enduring MUOS terminal test capability. This is achievable through W5s Mobile User Objective Orientation System (MUOOS) which is the worlds first and only MUOS satellite and ground system simulator. This project is broken down into two objectives. Objective 1 is to assemble and deliver a MUOOS to NAWCADs laboratory. The se ...

    SBIR Phase II 2019 Department of DefenseNavy
  3. Energy Storage Enclosure Technologies for High Density Devices

    SBC: Paragon Space Development Corporation            Topic: OSD12EP3

    Paragon proposed development of the Coacting High Integrity Material Energetic Release Attenuation (CHIMERA) system to contain energy release, exhaust products, and heat from failures of lithium ion batteries. CHIMERA uses a building block approach whereby layers of materials are tailored to provide thermal and over-pressurization protection for battery storage applications. Once qualified, these ...

    SBIR Phase II 2019 Department of DefenseNavy
  4. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: Alphacore, Inc.            Topic: None

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for Phase II of NIST's 2018 soliciation for Exploratory Measurement Science Topic 9.04.02.68.The proposing team has already successfully developed and evaluated a prototype board in Phase I.The goal in Phase II is therefore to achieve three primary objectives:1) Optimize the design ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  5. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  6. HQ-55 VTOL UAS for Ship Based Operation

    SBC: Latitude Engineering, LLC            Topic: 832

    TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Pocket-sized Surface Flotation Device for Cold Water Aviation Survival

    SBC: SAFE INC            Topic: N162096

    The Navy requires a life raft that is small enough to fit within a front pocket on the body-worn survival ensemble. Having a pocket-sized raft at hand helps facilitate successful egress, inflation, and boarding. The required 12 cubic inches of stowed volume is a significant challenge, considering that a typical one-person raft compacts to about 700 cubic inches under vacuum. Safe, Inc. (Safe) has ...

    SBIR Phase II 2018 Department of DefenseNavy
  8. Reduced Cavitation, High Efficiency Outboard Propulsors for Small Planing Craft

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N17AT019

    The Candent Technologies Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a bolt on assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsion system inc ...

    STTR Phase II 2018 Department of DefenseNavy
  9. High Density, High Efficiency Electrical Power Generation

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: N103207

    The movement to more-electric architectures during the past decade in military and commercial airborne systems continues to increase the complexity of designing and specifying the electrical power system in such architectures. In particular, electrical starter/generators (ES/G) on airborne systems have become much more complex in terms of design due to growth in electrical power and energy require ...

    SBIR Phase II 2018 Department of DefenseNavy
  10. Novel Method to Utilize Multi-scale Physics-based Technique for Crack Path Determination in Fiber-reinforced Composites

    SBC: GLOBAL ENGINEERING RESEARCH AND TECHNOLOGIES, LLC            Topic: N161010

    Composites are increasingly used in components for defense applications as well as commercial structures. They are generally exposed to microstructural damage and thermo-mechanical loading, leading to physical property degradation. It is a very challenging task to predict all possible failure modes (matrix cracking, fiber breakage, delamination) because damage initiation and its progressive growth ...

    SBIR Phase II 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government