List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Submarine Shipboard Power Supply Bridge

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: N171075

    The objective of this effort is to construct and test a 40 kW UPS with at least 100ms of holdup time, integrated into a standard 19 inch rack mount enclosure with 4U (7 inch) height, and designed to meet electrical and mechanical/shock specifications required for naval shipboard application. Traditional UPS applications are typically not optimized for weight and volume, and utilize bulky lead-acid ...

    SBIR Phase II 2019 Department of DefenseNavy
  2. Development, Validation, and Implementation of CMC Algorithm into a Software Platform for Firearm Analysis

    SBC: Cadre Research Labs (Illinois) LLC            Topic: NA

    The research involves implementation of a comparison algorithm for firearm forensics. The Congruent Matching Cells (CMC) algorithm and its associated CMF, CMPS, and CMX methods have been developed by NIST yet do not appear in any commercially available software. As requested in the call for proposals, we will implement the algorithms in the C++ programming language, we will validate their performa ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  3. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  4. Innovative Materials for Highly Loaded Wear Application in Arresting Gear Tailhook Components

    SBC: QUESTEK INNOVATIONS LLC            Topic: N093175

    Ferrium M54 is an ultrahigh-strength, high, toughness steel with high resistance to grinding burn damage, and stress corrosion cracking, which provides many technical and commercial benefits for use in the F-18 E/F/G hook point application over the incumbent 4330V steel. The technical advantages for risk mitigation, while extending the component life at approximately the same cost makes for a good ...

    SBIR Phase II 2018 Department of DefenseNavy
  5. Affordable Manufacturing of Refractory Metal Components

    SBC: SCIAKY, INC.            Topic: N142125

    The primary objective of this SBIR initiative is to develop, demonstrate, and validate new manufacturing technologies. The focus is complex parts made from refractory metals manufactured at reduced costs and increased fabrication rates. The target components are for use in post-boost control system (PBCS) hot-gas valves and manifolds. Emphasis on and addressing scale up for fabrication of full-sca ...

    SBIR Phase II 2018 Department of DefenseNavy
  6. Computational Tools to Enable Development of Alloys and Coatings for Advanced Gas Turbine Engines

    SBC: QUESTEK INNOVATIONS LLC            Topic: N162128

    QuesTek Innovations LLC, a leader in the field of Integrated Computational Materials Engineering (ICME), proposes to develop an ICME analysis tools involving Bayesian analysis, variance analysis, uncertainty management and database comparison and assessment functionalities to address the issue of database and model quality. QuesTek will apply the computational tool to improve databases and models ...

    SBIR Phase II 2018 Department of DefenseNavy
  7. Novel, High-Efficiency, Light-weight, Flexible Solar Cells as Electrical Power Generation Source

    SBC: MicroLink Devices            Topic: N16AT006

    MicroLink Devices proposes to integrate its high-efficiency, lightweight, and flexible solar sheets to the Puma UAS platform to significantly extend the flight endurance of the aircraft. The Navy has a growing fleet of small unmanned aerial system (UAS) vehicles that enable tactical intelligence, surveillance and reconnaissance (ISR) capabilities not possible before, and a need to extended mission ...

    STTR Phase II 2018 Department of DefenseNavy
  8. Reduced Cavitation, High Efficiency Outboard Propulsors for Small Planing Craft

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N17AT019

    The Candent Technologies Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a bolt on assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsion system inc ...

    STTR Phase II 2018 Department of DefenseNavy
  9. High Density, High Efficiency Electrical Power Generation

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: N103207

    The movement to more-electric architectures during the past decade in military and commercial airborne systems continues to increase the complexity of designing and specifying the electrical power system in such architectures. In particular, electrical starter/generators (ES/G) on airborne systems have become much more complex in terms of design due to growth in electrical power and energy require ...

    SBIR Phase II 2018 Department of DefenseNavy
  10. Nickel Aluminum Bronze for Additive Manufacturing Alloy Development

    SBC: QUESTEK INNOVATIONS LLC            Topic: N171088

    QuesTek Innovations LLC, a leader in the field of Integrated Computational Materials Engineering (ICME), proposes to design and optimize a new Nickel Aluminum Bronze (NAB) alloy for use as feedstock material in directed energy deposition (DED)-based additive manufacturing (AM) in order to enable the development of AM technologies for quicker, cheaper, and more reliable production and repair of NAB ...

    SBIR Phase II 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government