Award Data

Verification and validation (V&V) of ICs have become progressively difficult as design complexity, the reuse of third-party intellectual property, and malicious attacks on microelectronics have all increased. Given these challenges, the DoD needs automated, user-friendly post-synthesis verification and validation solutions to assure its critical hardware systems. To address this need, ECI presents ...

Expansion of aquaculture production depends crucially on the development of technologies that are able to add uncrewed management capabilities to fish farming operations, i.e., the ability to control the tank’s population remotely and without human presence. The present project aims to expand our successful Phase I feasibility research toward commercializing an autonomous device that can be inse ...

This SBIR Phase II project proposes to integrate an easy to use, inexpensive, and portable bacterial concentrator with a handheld pathogen detection system to enable ultra-low cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including in Yemen, where in the first 5 months of 2020 has had 110,000 suspected cases. Current methods used to detect the chole ...

This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

Domestic US aquaculture is moving toward fishmeal replacement in aquafeeds with a variety of alternative protein sources including plant-based, terrestrial and marine proteins. In our Phase I work we showed the feasibility of modifying the protein quality of several alternate protein sources, specifically animal byproduct meals, and its potential significant impacts on marine fish production. Th ...

The result of this project will be a fully functional prototype of the Model 8686H Precision Resistance-Ratio AC Bridge. The unit is capable of measuring resistances from 0 to 400 ohms with better than 0.1 uohm resolution and an accuracy of better than +/-0.05ppm. The unit will have advanced features such as a built-in web-browser, USB interface and built-in complex functions. Examples of such com ...

Even today as a highly technical and advanced world civilization, the physiology of deep sea fish and invertebrates continues to remain mysterious and poorly known. Past specimen containers fail to either have the size or volume needed or lack the robustness for high pressure containment of in many cases, lack the repeatability necessary to ensure a reasonable lifetime of continuous use. The Tec ...

This Small Business Innovation Research Phase II project uses the ¿smart-cut¿ methods to produce high performance and advanced functionality lithium tantalate pyroelectric sensors. Phase I has been devoted to feasibility demonstration of the ¿smart-cut¿ process, preliminary design studies for the advanced pyroelectric detectors and prototype device fabrication and testing. The Phase I ...

NIST desires to develop a standard of pressure in the range 0.3 MPa to 10 MPa based on measurements of the dielectric constants of gaseous helium and argon. This requires capacitance measurements having a better linearity than can be made with any currently available product. It is proposed that the design of the currently most precise commercial capacitance bridge be modified to improve its linea ...

A SMART Life Science prototype that facilitates the management of instrumentation data has far reaching implications. As much as the benefit is to an individual scientist, the greater impact affects the entire economy by facilitating the rapid launching of new scientific discoveries that cure disease and product new economic channels for firms. By improving process efficiencies in R&D organization ...