You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative Approaches to the Fabrication of Composite Rotary Wing Main Rotor Blade Spars with Option

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: N08026

    Sponsored by NAVAIR, Accudyne Systems completed a Phase 1 SBIR program, developing an equipment and process concept for cost-effective fabrication of composite rotary wing main rotor blade spars. The CH-53K spar was the study focus. The recommended work cell concept combines automated tape placement, woven fabric placement, and pick and place of 45° parallelograms to layup plies, then debulk and ...

    SBIR Phase II 2010 Department of DefenseNavy
  2. A Novel Noninvasive Microwave Sensor for Quantitative Assessment of Degree of Sensitization in Marine Aluminum Alloys

    SBC: ALPHASENSE, INC.            Topic: N09T022

    In phase I, we have proven the feasibility of using the microwave cavity perturbation technique to detect and quantify DoS in marine aluminum alloys. We implemented an alpha version sensor prototype, characterized and validated its performance using ASTM G67 method. We also identified methods to further enhance the sensor sensitivity, so that DoS in the low (a few mg/cm2) to moderate range can be ...

    STTR Phase II 2010 Department of DefenseNavy
  3. The Effects of JP-8 on High Pressure Common Rail Fuel Systems and Pumps

    SBC: ANALYTICAL ENGINEERING INC            Topic: A08128

    The lack of lubrication performance associated with JP-8 fuel in modern diesel engines equipped with High Pressure Common Rail (HPCR) fuel systems can lead to premature performance loss and catastrophic field failure. OEM¡¦s will need to first thoroughly understand these effects and then make provisions for JP-8 fuel compatibility as engines in the Army fleet are replaced with modern engines ...

    SBIR Phase II 2010 Department of DefenseArmy
  4. Nano-Passivation of GaSb/InAs Strained Layer Superlattices Infrared Detector

    SBC: B & W TEK INC            Topic: A08103

    Long-wavelength infrared (LWIR) imaging has significant importance in military surveillance and target recognition, since human body radiation peaks in LWIR. Despite the enhanced wavelength coverage, the GaSb/InAs type-II Strained Layer Superlattice (SLS) detector still exhibits relatively high surface leakage current and its associated noises. With an industrially proven nano-material, we propose ...

    SBIR Phase II 2010 Department of DefenseArmy
  5. GPU-Based High-Performance Computing for Accelerated Design and Analysis

    SBC: EM PHOTONICS INC            Topic: SB082024

    Commodity graphics processing units (GPUs) offer tremendous computational throughput for relatively little cost. They have been shown to outperform microprocessors in the important metrics of FLOPS/dollar, FLOPS/Watt, and FLOPS/unit space and have already been applied to a wide range of numerically intense problems. In Phase I of this project, we demonstrated their potential to enhance complex C ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  6. Enhanced Realtime Millimeter Wave Imaging Using Hardware Acceleration- CPP

    SBC: EM PHOTONICS INC            Topic: N06079

    The ultimate goal of this Commercialization Pilot Program (CPP) effort is to design, build, and integrate flight-ready custom electronics for a 220-channel MMW distributed-aperture imager. This work bases on a previous SBIR project, in which we constructed a single-channel prototype of the phase control electronics in a laboratory (breadboard) environment. To enable control of a 220-channel system ...

    SBIR Phase II 2010 Department of DefenseNavy
  7. GISARO- Phase II

    SBC: Bashpole Software, Inc.            Topic: SB091003

    Several geo-social inference concerns currently limit military stability and reconstruction operations: • Contact lists are not centrally coordinated, up to date, complete, or easily searchable • Vendor history is not maintained or combined with culture and safety information • Hand-off and coordination delays cause projects to span multiple troop cycles The proposed project answers the unde ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  8. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: IMAGINESTICS, LLC            Topic: DLA07001

    DoD agencies are facing growing challenge of maintaining aging Warfighter Systems, while reducing procurement costs of discrete-parts. One key hindrance to ensuring readiness is discrete part procurement. When procuring parts, tech data package which is provided to the suppliers during pre and post-award contains raster drawings which are often of very poor quality. Several suppliers do not provid ...

    SBIR Phase II 2010 Department of DefenseDefense Logistics Agency
  9. Tin Whisker Mitigation Technologies for Sn-based Surface Finishes on Electronic Assemblies and Microelectronic Devices

    SBC: Foresite, Inc.            Topic: MDA08T010

    The impact of metal whiskers on the reliability of electronics has been exacerbated by environmentally-driven efforts to eliminate lead from tin plating and solders. Even exempt applications, such as military, are affected due to COTS. Foresite, Inc., a consultant, laboratory and test equipment development company, has a goal for the subject research, in collaboration with Purdue University, to ...

    STTR Phase II 2010 Department of DefenseMissile Defense Agency
  10. Low Cost, Low Weight Composite Structure using Out-Of-Autoclave (OOA) Technology

    SBC: Kubota Research Associates            Topic: N08030

    This SBIR Phase II proposal develops an innovative PTIR adhesive and process for bonding stud fasteners to composite surfaces in aircraft manufacturing and repair. The PTIR adhesive formulation has a low concentration of infrared emitter/absorber dispersed in a thermoset epoxy adhesive paste. The PTIR adhesive paste is applied to the base of a stud fastener and the stud is irradiated using a P-Wav ...

    SBIR Phase II 2010 Department of DefenseNavy
US Flag An Official Website of the United States Government