Award Data

This SBIR project will develop a low cost sensor to obtain rail temperatures from a moving train. The two innovative parts of the proposed sensor are (1) a rugged four wavelength high frequency sensor that accurately measures the natural radiation emitted by the rails, and (2) an advanced algorithm that provides a emissivity compensated temperature from these measurements. The feasibility of the ...

The first goal of our team is to design and develop highly ductile cement mortar composites using novel patent applied for technology which has been shown to produce materials with high energy absorption, decreased modulus, higher tensile strength, and greater toughness than standard or ultra high performance concretes or fibercements. These materials will be used to produce NEMA Class 5 flood res ...

A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...

Even today as a highly technical and advanced world civilization, the physiology of deep sea fish and invertebrates continues to remain mysterious and poorly known. Past specimen containers fail to either have the size or volume needed or lack the robustness for high pressure containment of in many cases, lack the repeatability necessary to ensure a reasonable lifetime of continuous use. The Tec ...

Voxtel has demonstrated efficient high-speed photon counting with thresholded linear-mode avalanche photodiode (APD) receivers using multi-gain-stage InGaAs/InAIAs APDs. In contrast to Geiger APDs, thresholded photon-counting linear APD receivers are thought not to suffer afterpulsing, and can support maximum count rates (MCR) up to 2 or 3 orders of magnitude faster than Geiger APDs. However, the ...

Photon-X is proposing to develop a 3D roof imaging system to monitor vehicle roof deformation during vehicle rollover testing. The system will provide photographic resolution imagery with the ability to track the dot pattern on the vehicle roof. The Photon-X spatial phase 3D imaging system will provide an accurate visible record of roof deformation with position accuracy of 1mm and velocity accu ...