Award Data

The impact of metal whiskers on the reliability of electronics has been exacerbated by environmentally-driven efforts to eliminate lead from tin plating and solders. Even exempt applications, such as military, are affected due to COTS. Foresite, Inc., a consultant, laboratory and test equipment development company, has a goal for the subject research, in collaboration with Purdue University, to ...

A radiation hardened via-configurable analog array (RHVCAA) is proposed to provide a rapid prototyping mixed signal platform for implementing radiation hardened and high performance custom analog system designs. In phase I the feasibility of implementing RHVCAAs was investigated. Existing Triad semiconductor VCAA technology was assessed to determine modifications required to comply with radiation ...

Corvid Technologies is pleased to offer this SBIR Phase II proposal. In the proposed effort, we will extend the high-fidelity analysis processes demonstrated during Phase I to generate large-scale, production-quality databases for intercept debris fragments. Our approach utilizes an innovative combination of high-fidelity computational fluid dynamics for a broad range of flow conditions, high-pe ...

The impact of metal whiskers on the reliability of electronics has been exacerbated by environmentally-driven efforts to eliminate lead from tin plating and solders. Even exempt applications, such as military, are affected due to COTS. Foresite, Inc., a consultant, laboratory and test equipment development company, has a goal for the subject research, in collaboration with Purdue University, to ...

The objective of Phase II is to continue our efforts from the Phase I project and perform in-depth testing of technologies critical to achieving the required level of measurement performance. The Phase II project will involve the design of the NOAA water vapor profiling lidar and testing of component parts, seeking external sources of funding for the systems (for Phase III) and further creating a ...

The objective of this Phase II program is to develop missile cable shielding incorporating carbon nanotube membrane (buckypaper). Current metal shielding imposes a severe weight penalty, and the shielded cables are rigid and difficult to route. Therefore, it is critical to develop non-metallic cable shielding to provide protection from electromagnetic fields at reduced weight and with increased ca ...

A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...

A 128 x 128-format avalanche photodiode (APD) focal plane array (FPA), including a low-power dual-mode readout integrated circuit (ROIC) and low excess noise, high gain (M>1,200) will be developed for laser radar (LADAR) applications requiring reduced SWAP. The FPA gives LADAR seekers an advanced active tracking sensor capability, providing a sufficiently wide field of regard (FOR) to eliminate th ...

The recent emergence of the Silicon Drift detector (SDD), for use in energy dispersive x-ray spectrometry (EDS), has made possible x-ray event streams with count rates as high as 1-10 Mcps. A problem with existing digital signal processing, as applied to SDDs, is the significant presence of coincidence peaks above the x-ray background. These coincidence peaks occur with amplitudes comparable to lo ...

The Missile Defense Agency (MDA) has become more reliant on First Principles Model and Simulation to assess the effectiveness of the Ballistic Missile Defense System (BMDS). This is due in part to the continued growth in cost and schedule for ground based testing program that have traditionally been used for such assessments. Results from the Phase I SBIR, MDA-073-019 SBIR, Hypervelocity Interce ...