You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Navigation and Object-Location System to Assist Blind and Low-Vision Individuals in Indoor Environments

    SBC: CREATEABILITY CONCEPTS, INC.            Topic: N/A

    This project demonstrates the technical merit, feasibility, and cost-effectiveness of combining ground-breaking Radio Frequency Identification (RFID) technology with an innovative approach and state of-the-art software to deliver a system capable of removing barriers in vocational settings. This system assists individuals with disabilities to orient themselves and safely navigate in vocational env ...

    SBIR Phase II 2010 Department of Education
  2. High Efficiency, Large-Area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  3. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  4. Variable Position Mid-Wheel Drive System for Power Wheelchairs

    SBC: Criterion Health, Inc.            Topic: N/A

    This project designs, constructs, and evaluates a concept model based on current mid wheel designs. The concept model uses a variable position drive wheel system that can move forward or backward from the mid-wheel position using a simple mechanical system to change the position of the drive wheels. A series of five structured tests for maneuverability and/or stability are used to compare performa ...

    SBIR Phase II 2010 Department of Education
US Flag An Official Website of the United States Government