Award Data

This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

This proposal seeks to develop guidance algorithms and estimation schemes to intercept targets when they are boosting or on their ascent trajectory. Effective algorithma to work against such threats need to be robust, efficient and accurate due to the uncertainies in the target burn times and their intent. Furthermore, they could be manuevering. The guidance algorithms to be developed are based on ...

A 128 x 128-format avalanche photodiode (APD) focal plane array (FPA), including a low-power dual-mode readout integrated circuit (ROIC) and low excess noise, high gain (M>1,200) will be developed for laser radar (LADAR) applications requiring reduced SWAP. The FPA gives LADAR seekers an advanced active tracking sensor capability, providing a sufficiently wide field of regard (FOR) to eliminate th ...

The impact of metal whiskers on the reliability of electronics has been exacerbated by environmentally-driven efforts to eliminate lead from tin plating and solders. Even exempt applications, such as military, are affected due to COTS. Foresite, Inc., a consultant, laboratory and test equipment development company, has a goal for the subject research, in collaboration with Purdue University, to ...

The impact of metal whiskers on the reliability of electronics has been exacerbated by environmentally-driven efforts to eliminate lead from tin plating and solders. Even exempt applications, such as military, are affected due to COTS. Foresite, Inc., a consultant, laboratory and test equipment development company, has a goal for the subject research, in collaboration with Purdue University, to ...

A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...