You are here
The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.
SBC: En'urga Inc. Topic: NA
This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
SBC: Optechnology, Inc. Topic: 819S
The first goal of our team is to design and develop highly ductile cement mortar composites using novel patent applied for technology which has been shown to produce materials with high energy absorption, decreased modulus, higher tensile strength, and greater toughness than standard or ultra high performance concretes or fibercements. These materials will be used to produce NEMA Class 5 flood res ...SBIR Phase II 2010 Department of Commerce
SBC: VOXTEL, INC. Topic: N/A
A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology