Award Data

This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

TECHNICAL ABSTRACT: Commercial marine aquaculture operators face many operational hazards including disease, predators, husbandry operations, and environmental changes. Most of theses risks are only identified with constant surveillance and physical presence at a farm site. However, human observation of risk factors is expensive, slow, and sometimes ineffective. Sensors are available to monitor in ...

TECHNICAL ABSTRACT: The mobile coastal monitor project is designed to prove out the research done in Phase I using a Proof of Concept demonstration craft. The Proof of Concept demonstrator will be a geometrically scaled version of the craft designed during Phase I. The Phase I craft, the Advanced Coastal Monitor (ACM) was designed to use state-of-the-art green power supplies and apply them as the ...

The first goal of our team is to design and develop highly ductile cement mortar composites using novel patent applied for technology which has been shown to produce materials with high energy absorption, decreased modulus, higher tensile strength, and greater toughness than standard or ultra high performance concretes or fibercements. These materials will be used to produce NEMA Class 5 flood res ...

A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...