You are here
The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.
SBC: En'urga Inc. Topic: NA
This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
SBC: VOXTEL, INC. Topic: N/A
A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
SBC: PHT AEROSPACE LLC Topic: N/A
This proposal is for the development of a technology apparatus which can dynamically synthesize a mechanical fingerprint pattern, from an electronic image or from a computer-generated artificial pattern, onto a 2-dimensional pliable surface whose surface height is modulated by protrusions in the z-axis direction. When mechanically applied to a fingerprint sensor-under-test, the synthesized modulat ...SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology