List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. A Cryogenic Grinding System for the High Productivity Grinding of Advanced Materials

    SBC: CREARE LLC            Topic: DLA09001

    High performance metals, ceramics, and hard coatings are used in military applications to enhance the performance of key systems needed by the warfighter. One of the most prevalent operations to remove material, achieve the desired surface finish, or enhance part quality is bulk and finish grinding. For typical cutting speeds, conventional synthetic or oil-based coolants are sufficient to remove ...

    SBIR Phase II 2011 Department of DefenseDefense Logistics Agency
  2. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  3. Advanced Battery Manufacturing Technologies

    SBC: ADA Technologies, Inc.            Topic: DLA142001

    ADA Technologies, Inc. (ADA) in partnership with Laser Marks, a laser systems integrator, has designed, developed (Phase I) and will fabricate a low-cost, automated, high-speed/high-throughput Li-ion electrode cutter capable of producing high quality electrodes in an additive manufacturing environment. Utilizing the latest in laser technology and scanning systems coupled with innovative design and ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  4. Advanced Battery Manufacturing Technologies

    SBC: Xerion Advanced Battery Corporation            Topic: DLA142001

    In Phase I, XABC scaled the capability to produce nanostructured LCO cathodes using an electroplating process.In this phase II proposal, XABC proposes to further demonstrate this unique manufacturing capability to produce full cell batteries with enhanced performance and reduced cost in DLA products, as a precursor to XABC becoming a domestic manufacturer of electrochemical cells.This Phase II pro ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  5. Advanced Manufacturing Technologies

    SBC: FLIGHTWARE INC            Topic: DLA152001

    Real-time Automated Ply Inspection (RTAPI) is a layup inspection system that determines if the layup produced by an Automated Fiber Placement (AFP) machine meets drawing requirements. This is performed in real-time, while the machine is laying composite tapes onto the mold at very high speed, and provides several benefits. The fully automated system eliminates very slow and tedious manual inspecti ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  6. Advanced Manufacturing Technologies

    SBC: SENTIENT CORPORATION            Topic: DLA152001

    In response to DLA SBIR Topic DLA152-001 for Advanced Manufacturing Technologies, Sentient Corporation (Sentient) proposes to develop a life cycle cost optimization tool based on our commercial DigitalClone modeling technology. This tool will enable users to evaluate the tradeoffs between alternate manufacturing processes, implementation costs, and the performance/durability of the resultant comp ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  7. Advanced Processing of Ceramic Green Tape

    SBC: Mentis Sciences, Inc.            Topic: DLA152001

    Building upon the successes and lessons learned in the Phase I effort the Mentis Sciences Inc., Exothermics Inc., and Ragan Technologies Inc. team will adapt and scale the ceramic green tape materials and compression molding processes developed to relevant components demanded by industry. The team will demonstrate the capability of this process to produce low cost high temperature net shape cerami ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  8. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: IMAGINESTICS, LLC            Topic: DLA07001

    DoD agencies are facing growing challenge of maintaining aging Warfighter Systems, while reducing procurement costs of discrete-parts. One key hindrance to ensuring readiness is discrete part procurement. When procuring parts, tech data package which is provided to the suppliers during pre and post-award contains raster drawings which are often of very poor quality. Several suppliers do not provid ...

    SBIR Phase II 2010 Department of DefenseDefense Logistics Agency
  9. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: BUYCASTING.COM, INC.            Topic: DLA07001

    Under a prior Air Force SBIR program, buyCASTINGS.com and its technology division, FOPAT, developed an innovative material and process to manufacture patterns for the investment casting industry. Defying thousands of years of traditional investment casting practices, FOPAT’s new process utilizes an advanced and proprietary foam material instead of wax. While FOPAT’s product is a direct replace ...

    SBIR Phase II 2009 Department of DefenseDefense Logistics Agency
  10. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: MATERIALS INNOVATION TECHNOLOGIES, LLC            Topic: DLA07001

    Materials Innovation Technologies LLC is developing a method for making polymer matrix composites fiber preforms that has the potential to revolutionize the industry. The Three Dimensional Engineered Preform (3-DEP) process represents the state-of-the art in chopped fiber preform manufacture. 3-DEP produces a homogeneous fiber distribution within parts and consistent part weight and dimensions f ...

    SBIR Phase II 2009 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government