List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Affordable 3-Dimensional Ceramic Discrete Parts via Additive PDC Technology

    SBC: Nanosonic Inc.            Topic: DLA152001

    NanoSonic, a 30,000 square foot specialty materials production facility, in the Wheatland Eco-Park, has developed an environmentally friendly, advanced manufacturing process to fulfill the Defense Logistics Agencys (DLA) need for affordable discrete-parts with fine features for legacy and future fielded weapon systems.We have developed a technically advanced and innovative manufacturing method to ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  2. Advanced Manufacturing Technologies

    SBC: FLIGHTWARE INC            Topic: DLA152001

    Real-time Automated Ply Inspection (RTAPI) is a layup inspection system that determines if the layup produced by an Automated Fiber Placement (AFP) machine meets drawing requirements. This is performed in real-time, while the machine is laying composite tapes onto the mold at very high speed, and provides several benefits. The fully automated system eliminates very slow and tedious manual inspecti ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  3. Aircraft Alternative Braking System for Reduced Cost of Sustainment

    SBC: American Maglev Technology of Florida, Inc.            Topic: DLA161002

    This proposal provides a detailed account of the Teams work through Phase 1 of the Magnetic Braking and Electric Taxiing SBIR as well as provides a pathway for building and testing a brake system in Phase 2. Having competed the effort of designing the magnetic braking and electric taxiing system in Phase 1, the Team is able to look back and take account the Program goals, accomplishments, and nece ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  4. Reinforced Additively Manufactured Compression Assisted Molding (RAMCAM) of On-Demand Environmentally Stable Structural Composite Parts

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: DLA152001

    San Diego Composites, Inc. (SDC) is developing the Reinforced Additively Manufactured Compression Assisted Molding (RAMCAM) pod to produce on-demand, corrosion resistant, aluminum and stainless steel equivalent parts in less than three days. RAMCAM combines the advantageous 2 day lead time of custom parts produced by 3D printing with the 1 day forging of structural parts via composite compression ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  5. Seamless Flexible Fuel Tanks- 65% TOC Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    The DoD uses flexible fuel bladders in multiple air, ground, and sea vehicles because they: 1) easily fit into almost any space, 2) are corrosion resistant, and can often be self-sealing and explosion resistant, 3) allow for customized placement of fittings and connection points, and 4) these flexible tanks can collapse as they empty, thereby reducing the need for venting and minimizing sloshing a ...

    SBIR Phase II 2016 Department of DefenseDefense Logistics Agency
  6. Method for Reducing the Cost and Improving the Quality of Aerospace Bearing Production

    SBC: COVENTRY ASSOCIATES, INC.            Topic: DLA10001

    The patented Eccentric Positioning System will be used in the design of a prototype grinding machine tool. This approach dramatically improves grinding process control by controlling the 3 most important process variables, the normal grinding force and grinding wheel position as well as the grinding wheel angle in real time whereas existing machines only control the wheel position. In Phase I w ...

    SBIR Phase II 2012 Department of DefenseDefense Logistics Agency
  7. STRETCH ROLL FORMING

    SBC: Fairmount Technologies LLC            Topic: DLA09001

    During the Phase I SBIR project funded by DLA, Fairmount Technologies (FT) has developed and proven a new CNC metal formingprocess called stretch roll forming (SRF) that can produce complex parts made out of extrusions without part-specific dies. The proofof-concept machine developed has stretch formed flat and T-section extrusions to geometry similar to that of aircraft parts.Recognizing the pote ...

    SBIR Phase II 2012 Department of DefenseDefense Logistics Agency
  8. Implementation of Thermal Sensing Controls in Additive Manufacturing for Part Quality and Process Repeatability

    SBC: STRATONICS, INC.            Topic: DLA152001

    Stratonics, Inc. proposes to tightly integrate their modular thermal monitoring and control system across multiple additive manufacturing processes to create robust platforms, capable of consistent part quality and process repeatability. Software/hardware interface modules will be developed in a production ready solution with true temperature monitoring and active thermal controls to record key t ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  9. Advanced Battery Manufacturing Technologies

    SBC: Xerion Advanced Battery Corporation            Topic: DLA142001

    In Phase I, XABC scaled the capability to produce nanostructured LCO cathodes using an electroplating process.In this phase II proposal, XABC proposes to further demonstrate this unique manufacturing capability to produce full cell batteries with enhanced performance and reduced cost in DLA products, as a precursor to XABC becoming a domestic manufacturer of electrochemical cells.This Phase II pro ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  10. Additively Manufactured Inflatable Hulls- Improved Survivability- 20% Total Ownership Cost Reduction

    SBC: Response Technologies, LLC            Topic: DLA152001

    Seam failures of flexible inflatable hulls is the primary reason for failures of military RHIBS and CRCs.These failures are a result of the current manufacturing methods being used, and which have been in place for over fifty years.Whats more, the manufacturing methods and fragmented supply chain of these hulls result in very long and unreliable lead times.These shortcomings impact the survivabili ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government