List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Acoustic Test Method for Turbofan Engine Exhaust Systems at Cruise Conditions

    SBC: Aero Systems Engineering, Inc.            Topic: A201

    The exhaust flow from a turbofan engine operating at typical cruise conditions generates noise as turbulent flow interacts with the basic shock cell pattern. This can be a significant source of noise within the aircraft cabin. The proposed innovation is a new method for testing the acoustics of model scale turbofan engine exhaust systems at cruise conditions in a transonic wind tunnel. This would ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  2. Chemical-Resistant Glass Fiber Reinforced Composites Incorporating Bio-Based Ion Exchangers Derived from Agricultural Residues and Starches

    SBC: Technova Corporation            Topic: N/A

    Gass fiber composites suffer from early deterioration when exposed to alkaline environments. This project incorporates bio-based ion exchangers into the polymer matrix of glass fiber composites in order to neutralize aggressive chemicals and thus enhance the chemical resistance of composites.

    SBIR Phase II 2004 Department of Agriculture
  3. Chronic Telemetric Biofluid Flow Monitoring Device

    SBC: Integrated Sensing Systems Incorporated            Topic: N/A

    Currently, no method exists for continuously, noninvasively monitoring flow in the vascular and other biofluidic systems. The proposed effort will ultimately develop a stent-based, telemetric, implantable flow monitor. Once implanted, flow data may be read noninvasively through magnetic telemetry, using a compact readout unit. This system will take advantage of state-of-the-art Microelectromechani ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  4. Co-Generation of High Purity Hydrogen and Electric Power

    SBC: Technology Holding, LLC            Topic: A202

    The proposed innovation is an integrated hybrid solid state electrochemical system providing co-generation of high purity hydrogen and electric power. The embodiment is a physical, chemical and thermal integration of three processes: (1) production high purity hydrogen, (2) electrochemical partial oxidation of hydrocarbon fuel, and (3) power generation by a solid oxide fuel cell. This highly integ ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  5. High-Frequency, Low-Noise Nitride-Based Power Transistors Grown on Bulk III-N

    SBC: SVT ASSOCIATES, INCORPORATED            Topic: E204

    Electronics circuits that can function in very high temperatures (> 450?C) are needed for a number of applications including automotive and turbine engine control, industrial high-temperature processing, geothermal and deep-well oil drilling, satellite power management systems, and future planetary missions to Venus and Mercury. The key electronic components for these applications include 1) an i ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  6. Magneto-Thermal MRAM

    SBC: NVE CORP. (FORMERLY NONVOLATILE ELECTRONICS, INC.            Topic: BMDO02004

    Magneto-Thermal MRAM uses both heat and magnetic field (current)to overcome thermal instabilities of very small memory cells. Self-generated heat in the cell raises the temperature of magnetic material in the cell above the exchange ordering temperature of the magnetic material (either ferromagnetic or anti-ferromagnetic). Magneto-Thermal MRAM is compatible with advances in photolithography down t ...

    SBIR Phase II 2004 Department of DefenseDefense Threat Reduction Agency
  7. Miniature Intelligent Sensor Electronics

    SBC: NVE CORP. (FORMERLY NONVOLATILE ELECTRONICS, INC.            Topic: A504

    The proposed development will integrate data acquisition electronics with a relatively high performance processing capability and a large amount of memory, all in a miniature package, yielding a miniature, intelligent, sensor electronics module. This combination allows embedding of intelligent functions on sensors, providing the capability to implement data pre-processing and health monitoring of ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  8. The cryogenic evaluation of typical and experimental filament winding materials

    SBC: Hypercomp Engineering, Inc            Topic: H306

    HyPerComp Engineering, Inc. (HEI) proposes to develop well characterized, reliable filament wound composite pressure vessels for cryogenic and other low temperature applications. The proposed effort also explores the potential for a significant improvement in filament wound composite pressure vessels performance (end results: lighter weights) through cryogenic process treatment. Both the aerospac ...

    SBIR Phase II 2004 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government