You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Reconfiguration of Component Level Control Network Automation Systems

    SBC: Adept Systems, Inc.            Topic: N/A

    "This project will develop and implement in embedded hardware the capability needed to configure pre hit, a component level automation infrastructure.This approach optimizes survivability using models of damage or casualty scenarios. This capability willbe demonstrated in a laboratory hardware in the loop simulation. This project leverages the results of several other ongoing research efforts al ...

    STTR Phase II 2002 Department of DefenseNavy
  2. N/A

    SBC: ADVANCED MODULAR POWER SYSTEMS            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseAir Force
  3. N/A

    SBC: BAKER ENGINEERING, LLC            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseArmy
  4. HYPERSONIC RAMJET LEADING EDGE MATERIALS DEVELOPMENT

    SBC: Technology Holding, LLC            Topic: N/A

    CERAMATEC HAS CONDUCTED EXPLORATORY RESEARCH AND DEVELOPMENT ON MONOLITHIC AND COMPOSITE MATERIALS IN THE ZRB2 AND TIB2 SYSTEMS AND HAS OBTAINED VERY ENCOURAGING RESULTS WITH SEVERAL PROPRIETARY COMPOSITIONS/CONSTRUCTIONS. THE AVERAGE STRENGTH OF A BASELINE TIB2 COMPOSITION WAS MEASURED AT 877 MPA (127.3 KSI). COMPOSITE STRUCTURESWITH DISCONTINUOUS REINFORCEMENT HAD STRENGTHS IN THE RANGE 400-600 ...

    SBIR Phase II 1989 Department of DefenseNavy
  5. INJECTION MOLDING OF CERAMIC MATRIX COMPOSITES

    SBC: Technology Holding, LLC            Topic: N/A

    THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE SUCCESSFUL FABRICATION AND DENSIFICATION OF CERAMIC MATRIX COMPOSITES FORMED BY INJECTION MOLDING. TO ACCOMPLISH THIS OBJECTIVE, A DESIGNED TEST MATRIX WILL BE DEVELOPED THAT WILL SYSTEMATICALLY INVESTIGATE THE KEY INJECTION MOLDING AND DEBINDING PARAMETERS SUCH AS BINDER COMPOSITION, SOLIDS RATIO, MOLDING CONDITIONS, DEBINDING CONDITIONS ...

    SBIR Phase II 1989 Department of DefenseNavy
  6. N/A

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseArmy
  7. N/A

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of DefenseArmy
  8. Training Environment for Satellite Command Composition

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    "The vast amount of knowledge on human information processing and performance has been under utilized for solving real world problems. A typical satellite control system uses 500 to 1000 commandlets (fragmentary commands), which must be optimally puttogether for efficient and effective satellite control. Also, since satellites can be controlled from many different places, with learning and traini ...

    SBIR Phase II 2002 Department of DefenseAir Force
  9. Advanced Personal Communicator

    SBC: CYBERNET SYSTEMS CORPORATION            Topic: N/A

    "The vision of the Advanced Personal Communicator (APC) is a Navyvessel with reduced manning and yet a higher crew efficiency.The device we propose to develop is a maintenance aid andcommunication device that allows the user to communicate with anyother APC user anywhere on the ship through two-way wirelessvideo. Each user will also be given access to any documentsavailable on the ship-wide wirel ...

    SBIR Phase II 2002 Department of DefenseNavy
  10. Simulating Detection System Output Data for the Development of Decision Support Systems

    SBC: COGNITECH CORPORATION            Topic: N/A

    "Accurately simulating sensor data is necessary to develop meaningful and effective decision support systems. This process requires the inclusion of all phenomena that significantly influence the data after propagation through the detection chain. Phase Ideveloped a prototype framework, methodology and simulation environment for propagating noise and uncertainty through components of a general d ...

    SBIR Phase II 2002 Department of DefenseNavy
US Flag An Official Website of the United States Government