Award Data

This effort joins the MEMS-based deformable mirror technology available from AgilOptics, a New Mexico small business, with the aero-optics technology of the University of Notre Dame to develop an Aero-optics Simulator. This simulator will develop a library of aero-optics patterns to simulate atmospheric distortions for test and evaluation of military or commercial beam control systems.

Optically interconnected systems provide a number of additional benefits. For example, by removing metallic traces, many signal integrity issues are also eliminated as the parasitic capacitance and inductance associated with high-speed lines are removed, which further improves systems performance. Additionally, such systems typically require less power and experience less leakage, or wasted power ...

Qynergy Corporation proposes to develop a unique power system for space targets for RADAR calibration and test of advanced discrimination technologies and concepts. There is a need for well-characterized cooperative space targets that can decrease reliance on expensive BMDS integrated flight tests. The space target system would consist of at least 2 objects: a cone of approximately 1-m diameter, ...

This Phase II STTR project will continue the research and development of a simultaneous multi-species sensor system for scramjets flight test instrumentation. The sensor system is based on modulation-frequency multiplexing to combine several laser wavelengths and using a single two-color photodiode detector to collect the laser signals along the same optical path. High-sensitivity detection of c ...

Leveraging Spectrum Magnetics’ expertise in large scale fabrication of nanomaterials together with University of Delaware’s know-how in the research of magnetodielectric materials with simultaneously large permittivity and permeability, we propose to design and fabricate RF polymers that promise applications in antenna with much improved functionalities in miniaturization, impendence matching, ...

Future power conditioning, control electronics and directed energy weapons will require significant energy storage for a wide range of power applications. Systems will depend on capacitors to deliver high current and high voltage under repetition. In order to find practical embodiment on mobile platforms, significant advances in compact power sources will be required. In response this need, TP ...

Advances in fabrication technology have made it possible to prodce features that are smaller than the wavelength of light. As such a new class of optical devices based on submicron periodic structures has emerged and is referred to as photonic crystals (PhC) or photonic band gap devices (PBGs). Preliminary research indicates that these devices will be capable of performing a wide variety of functi ...

The optimization of scramjet engine performance parameters such as combustion efficiency, thrust maximization, reduction in pollutants, minimization of exhaust signatures (for stealth) are essential. Measurements of chemical species and temperature in the scramjet engine during test flight are critical for evaluating engine performance. For a diode laser-based sensor system to be a viable option ...

In the field of electric space propulsion, specifically colloidal propulsion, there has been significant improvements of recent date in the development of small micro-fabricated arrays operating in the single Taylor Cone per emitter regime. To increase thrust, the density of 2-D arrays must be increased. The state-of-the-art employs silicon based MEMS fabrication techniques to effect suitable mult ...

Crested multi-layer tunnel barriers have been proposed, which offer a revolutionary solution to overcome density to speed trade-offs characteristic of present data storage technologies. Practical implementation of the proposed technology will involve useof thin film materials which are readily manufacturable and CMOS-compatible. A critical need exists for experimental verification of the theoret ...