List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Virtual RF Environment

    SBC: DataSoft Corp.            Topic: A09060

    The DataSoft Virtual Radio Frequency (RF) Environment (VRE) functional prototype provides a system for immersing a few representative Command, Control, Communications (C3) Systems-under-Test (SUT) in an emulated environment of virtual emitters and realistic environmental RF channel effects to stress them as they would be in the real world. The VRE Channel Emulation impairs signals delivered betwee ...

    SBIR Phase II 2012 Department of DefenseArmy
  2. Development and Scale-Up of Nanothermite Composites for Propellant Ignition

    SBC: INNOVATIVE MATERIALS & PROCESSES LLC            Topic: A10050

    The main objective of this proposal SBIR Phase II project is to scale-up and demonstrate the low-cost formation of 15-35 kg/yr of nanothermite-nitrocellulose composite granules for propellant ignition and as additives to explosive materials. All of the reactants used for the energetic composites will be made from United States produced materials. The reactive composites will use a base nanothermit ...

    SBIR Phase II 2012 Department of DefenseArmy
  3. Laser Vibrometry Detection of SBIEDs

    SBC: Photonics Applications, LLC            Topic: A10120

    The objective of this effort is to design and build and test a prototype laser interferometric sensor system for the detection of suicide bombers, burried IEDs and buried land mines.

    SBIR Phase II 2012 Department of DefenseArmy
  4. Multi-Spectral Combat ID Beacon

    SBC: Diffraction, Ltd            Topic: SOCOM10008

    For Phase 2, Diffraction proposes to develop a small, lightweight, low profile, battery powered multi-spectral combat ID beacon. The beacon will output enough energy in the mid wave infrared (MWIR) bands to be visible to nearly all US and allied targetin

    SBIR Phase II 2012 Department of DefenseSpecial Operations Command
  5. Comprehensive Latency Mitigation in EOIR Sensor Controls

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A11072

    In Phase I, Kutta hypothesized multiple Latency Improvement Algorithms (LIAs) for the control of Electro-Optical and Infrared payloads onboard Unmanned Aerial Vehicles. Through an extensive human factors study within a representative simulated environment, Kuttas researchers proved their hypotheses and, in many cases, saw a 50% or more improvement in effectiveness among the participants. In Phase ...

    SBIR Phase II 2012 Department of DefenseArmy
  6. Volume and Weight Reduction Method for Intermediate Moisture Ration Components and Snacks

    SBC: Creative Resonance Inc.            Topic: A11046

    The need to develop an alternative technology to those that dominate the snack food industry has become apparent over the last decade. Quality, nutrition, functionality, health considerations articulated by the consumers coupled to efficiency, low energy requirements, low asset base, small process footprint, etc. highly desired by manufacturers have constantly reinforced this need stimulating few ...

    SBIR Phase II 2012 Department of DefenseArmy
  7. Lightweight Mine-Protected Fasteners for Blast Protection Appliqués

    SBC: ArmorWorks, Inc.            Topic: A06191

    This proposal describes a 24-month SBIR Phase II program to fabricate, test, and validate prototype fastener design concepts for an impulse resulting from an anti-vehicular blast event against a tactical vehicle. The design should reduce weight by 25-40% compared to typical fasteners, minimize shearing and fragmentation effects, and decrease the time to install the blast protection kit at a reaso ...

    SBIR Phase II 2007 Department of DefenseArmy
  8. HighlyEfficient 2.09 Micron Fiber Laser

    SBC: NP Photonics, Inc.            Topic: A06107

    This proposal is for the development of new Ho3+-doped germanate glass fiber laser at 2.09micron with output power of 50 watts and wall-plug efficiency of greater than 10%. This type of fiber laser can be used to generate multiple bands lasers for infrared countermeasure systems through optical parametric oscillators. We propose to use Ho3+ doped germanate glass fibers because silica glass fiber ...

    SBIR Phase II 2007 Department of DefenseArmy
  9. The use of proteomics for surrogate markers of prion infection

    SBC: RURAL TECHNOLOGIES, INC.            Topic: OSD05H06

    Transmissible Spongiform Encephalopathies are a new class of infectious diseases, as the causative agent appears to be an altered form of a normal cellular protein capable of self-replication. While these diseases originally gained attention as food-borne illnesses, it has become apparent that blood and blood-products may also transmit disease. This observation is of further concern as definiti ...

    SBIR Phase II 2007 Department of DefenseArmy
  10. An Innovative Mine Blast / IED Energy Attenuating Seat for use in Ground Vehicles

    SBC: SAFE INC            Topic: A05245

    This proposal describes a Phase II SBIR program to develop, optimize, build and test an innovative energy attenuating seat for use in military ground vehicles. The proposed seat design and underlying energy absorption technology enhances occupant survivability by attenuating accelerative forces caused by landmine/IED detonations. Unlike previous seat designs/seat technology which could offer onl ...

    SBIR Phase II 2007 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government