You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Electro-Optically Guided Radar Imaging

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A13040

    Herein, PSI proposes to leverage extensive development in the area of optically sampled passive millimeter-wave imaging to develop dual mode active/passive imagers that provide both the intuitive, real-time imagery of a passive imager and the ranging capabilities of an active sensor. To accomplish this task, an optically sampled millimeter-wave receive array is sampled via optical pulsed laser gat ...

    SBIR Phase II 2015 Department of DefenseArmy
  2. Virtual RF Environment

    SBC: DataSoft Corp.            Topic: A09060

    The DataSoft Virtual Radio Frequency (RF) Environment (VRE) functional prototype provides a system for immersing a few representative Command, Control, Communications (C3) Systems-under-Test (SUT) in an emulated environment of virtual emitters and realistic environmental RF channel effects to stress them as they would be in the real world. The VRE Channel Emulation impairs signals delivered betwee ...

    SBIR Phase II 2012 Department of DefenseArmy
  3. Laser Vibrometry Detection of SBIEDs

    SBC: Photonics Applications, LLC            Topic: A10120

    The objective of this effort is to design and build and test a prototype laser interferometric sensor system for the detection of suicide bombers, burried IEDs and buried land mines.

    SBIR Phase II 2012 Department of DefenseArmy
  4. Comprehensive Latency Mitigation in EOIR Sensor Controls

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A11072

    In Phase I, Kutta hypothesized multiple Latency Improvement Algorithms (LIAs) for the control of Electro-Optical and Infrared payloads onboard Unmanned Aerial Vehicles. Through an extensive human factors study within a representative simulated environment, Kuttas researchers proved their hypotheses and, in many cases, saw a 50% or more improvement in effectiveness among the participants. In Phase ...

    SBIR Phase II 2012 Department of DefenseArmy
  5. Volume and Weight Reduction Method for Intermediate Moisture Ration Components and Snacks

    SBC: Creative Resonance Inc.            Topic: A11046

    The need to develop an alternative technology to those that dominate the snack food industry has become apparent over the last decade. Quality, nutrition, functionality, health considerations articulated by the consumers coupled to efficiency, low energy requirements, low asset base, small process footprint, etc. highly desired by manufacturers have constantly reinforced this need stimulating few ...

    SBIR Phase II 2012 Department of DefenseArmy
  6. High Sensitivity Rugged Array Detectors for Field Deployed Instruments: Low-Light Level Camera for Laser-Induced Breakdown Spectroscopy (LIBS) and Ram

    SBC: B & W TEK INC            Topic: A06065

    Laser-induced breakdown spectroscopy (LIBS) and Raman spectroscopy are developing rapidly for chemical and biochemical sensing applications. There is an urgent need for high-sensitivity detectors so as to minimize sample quantity and maximize detection range from the source. In most field-deployable spectrometers, a photo-detector array is used for analyzing the spectral contents. The sensitivitie ...

    SBIR Phase II 2008 Department of DefenseArmy
  7. Flameless Personal Water Heater Using Battlefield Fuel (JP-8)

    SBC: CUBE Technology            Topic: A07165

    CUBE Technology has created an extremely compact and efficient enclosed combustor dubbed a Micro-Furnace. These Micro-Furnaces have demonstrated an unprecedented operating range and operate on fuels from alcohol to diesel to JP-8. This Micro-Furnace combustor will be the core of the flameless personal water heater. This combustor is fast-starting and delivers its heat via radiation and convecti ...

    SBIR Phase II 2008 Department of DefenseArmy
  8. Field-deployable source of Carbon Dioxide for use in Vector Surveillance

    SBC: CUBE Technology            Topic: A07152

    CUBE Technology has created an extremely compact and efficient enclosed combustor dubbed a Micro-Furnace that have demonstrated an unprecedented operating range. They operate on fuels from hydrogen to alcohol to JP-8. This Micro-Furnace combustor is fast-starting and burns less than 200gm of JP-8 fuel to deliver 400cc/minute of CO2 Mosquito attractant over 12 hours. In addition, this system inc ...

    SBIR Phase II 2008 Department of DefenseArmy
  9. Multi-Agent Based Small Unit Effects Planning and Collaborative Engagement with Unmanned Systems

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A07032

    For Phase II, Kutta proposes their Autonomous Multi-Mission Planner and Controller Tool (AMMPACT) solution to produce a lightweight, modular, ruggedized heterogeneous unmanned vehicle controller. The AMMPACT product goal is to assist the Army with increasing the lethality and survivability of the warfighters while reducing the amount of equipment required to be carried. Kutta’s AMMPACT product ...

    SBIR Phase II 2008 Department of DefenseArmy
  10. A Process to In-Situ Form Cooling Channels in SiC/SiC Composite Turbine Blades and Nozzles

    SBC: ATS-MER, LLC            Topic: A07012

    Ceramic matrix composites (CMCs) such as SiC/SiC offer higher temperature capabilities than metals with cooling channels in turboshaft engines. Even higher operating temperatures are possible if cooling channels can be produced in SiC/SiC composites as well as silicon free environmental barrier coatings (EBC). The Phase I program demonstrated that cooling channels can be in-situ formed in the fa ...

    SBIR Phase II 2008 Department of DefenseArmy
US Flag An Official Website of the United States Government