For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Nano-Inspired Broadband Photovoltaics Sheets

    SBC: MicroLink Devices            Topic: A13020

    The objective for Phase II is to transition the nanopatterning results obtained in Phase I to epitaxial lift-off (ELO)-based GaAs cells. By developing nanopatterning on ELO solar cells and antireflection coatings and by laminating the cells using nanopatterned PET/Teflon films, we can develop highly flexible and lightweight solar cells that are less sensitive to the angle of incidence of incoming ...

    SBIR Phase II 2015 Department of DefenseArmy
  2. Water Vapor Extraction System (WaVES)

    SBC: HY-TEK MANUFACTURING CO., INC.            Topic: A13080

    During its Phase I SBIR research and development efforts Hy-Tek Mfg. Co. Inc. (HMC) designed, fabricated and demonstrated an innovative technology devised specifically to achieve the U.S. Army's CSS water vapor reclamation goals, including:CSS Water Va

    SBIR Phase II 2015 Department of DefenseArmy
  3. Virtual RF Environment

    SBC: DataSoft Corp.            Topic: A09060

    The DataSoft Virtual Radio Frequency (RF) Environment (VRE) functional prototype provides a system for immersing a few representative Command, Control, Communications (C3) Systems-under-Test (SUT) in an emulated environment of virtual emitters and realistic environmental RF channel effects to stress them as they would be in the real world. The VRE Channel Emulation impairs signals delivered betwee ...

    SBIR Phase II 2012 Department of DefenseArmy
  4. Laser Vibrometry Detection of SBIEDs

    SBC: Photonics Applications, LLC            Topic: A10120

    The objective of this effort is to design and build and test a prototype laser interferometric sensor system for the detection of suicide bombers, burried IEDs and buried land mines.

    SBIR Phase II 2012 Department of DefenseArmy
  5. Zero Power/Ultra Low Power Tamper Detection Sensors

    SBC: Starfire Industries LLC            Topic: OSD10A09

    This SBIR project will fabricate and characterize no-power sensors to enable self-protection mechanisms to prevent an adversary from accessing or reverse-engineering sensitive military electronics containing critical program information (CPI). Due to the wide number of threat channels and intrusion modalities, innovative approaches on anti-tamper (AT) sensor technology are needed to counter a cap ...

    SBIR Phase II 2012 Department of DefenseArmy
  6. In-Vacuo Passivation of High Aspect Ratio HgCdTe Surfaces

    SBC: EPIR TECHNOLOGIES INC            Topic: A10018

    The overall goal of this project is to develop a 100 degrees C temperature ALD CdTe passivation process capable of conformally passivating high aspect ratio surfaces of HgCdTe infrared detectors. The effort is comprised of first establishing the low temperature ALD process, next in fully characterizing the resulting CdTe, then implementing in-situ sample surface preparation, and finally in passi ...

    SBIR Phase II 2012 Department of DefenseArmy
  7. Comprehensive Latency Mitigation in EOIR Sensor Controls

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A11072

    In Phase I, Kutta hypothesized multiple Latency Improvement Algorithms (LIAs) for the control of Electro-Optical and Infrared payloads onboard Unmanned Aerial Vehicles. Through an extensive human factors study within a representative simulated environment, Kuttas researchers proved their hypotheses and, in many cases, saw a 50% or more improvement in effectiveness among the participants. In Phase ...

    SBIR Phase II 2012 Department of DefenseArmy
  8. Volume and Weight Reduction Method for Intermediate Moisture Ration Components and Snacks

    SBC: Creative Resonance Inc.            Topic: A11046

    The need to develop an alternative technology to those that dominate the snack food industry has become apparent over the last decade. Quality, nutrition, functionality, health considerations articulated by the consumers coupled to efficiency, low energy requirements, low asset base, small process footprint, etc. highly desired by manufacturers have constantly reinforced this need stimulating few ...

    SBIR Phase II 2012 Department of DefenseArmy
  9. Lightweight Mine-Protected Fasteners for Blast Protection Appliqués

    SBC: ArmorWorks, Inc.            Topic: A06191

    This proposal describes a 24-month SBIR Phase II program to fabricate, test, and validate prototype fastener design concepts for an impulse resulting from an anti-vehicular blast event against a tactical vehicle. The design should reduce weight by 25-40% compared to typical fasteners, minimize shearing and fragmentation effects, and decrease the time to install the blast protection kit at a reaso ...

    SBIR Phase II 2007 Department of DefenseArmy
  10. Interactive Learning Environment for Managing Multinational, Interagency, and Other Interactions in Stability, Security, Transition and Reconstruction


    The purpose of this research is to investigate the implications of culture for interagency SSTR operations and to outline the design requirements for a computer-based operational support and performance development system. The overall goal is to determine how to leverage advanced technologies in order to create an augmented performance environment, thereby enhancing interagency interaction in all ...

    SBIR Phase II 2007 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government