You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Laser/Microwave Energy Deposition to Improve Control/Performance of High Speed Vehicles

    SBC: PHYSICS, MATERIALS, AND APPLIED MATHEMATICS RESEARCH L.L.C.            Topic: AF103009

    ABSTRACT:In this effort, we will couple the energy of focused microwave bursts into the air and onto surfaces by first forming a laser plasma. The presence of the laser plasma allows much lower microwave intensities to couple their energy to the laser-pre-ionized surface or air- volume, allowing more efficient energy-transfer and the use of lower-power microwave systems to achieve the desired effe ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. Wireless Power for Battlefield Airmen Operation

    SBC: Armorworks Enterprises, Inc.            Topic: AF121192

    ABSTRACT: A phase II program is proposed leading to integrate wireless inductive power transfer technology on two prototype tactical vests. The focus of the phase II program would be the development and evaluation of a full-scale inductive power transfer system on a PRC-152 radio by both modifying and interfacing its battery. Because a mating vest/pouch that contains inductive charging circuits so ...

    SBIR Phase II 2015 Department of DefenseAir Force
  3. Holographic Video Display Using Novel Guided-wave Scanning System

    SBC: TIPD LLC            Topic: AF131023

    ABSTRACT:Todays analysts need improved 3D visualization tools to assist in critical situations such as deconfliction, line-of-sight analysis, air space and satellite control.Currently available 3D displays cannot provide the level of detail and comfort needed because the displays contain unacceptable visual artifacts, do not provide full parallax, require special headgear, and induce nausea in man ...

    SBIR Phase II 2015 Department of DefenseAir Force
  4. Thick Composite Crack Analysis

    SBC: GLOBAL ENGINEERING RESEARCH AND TECHNOLOGIES, LLC            Topic: N132101

    Advanced thick composites are increasingly used in components for defense applications as well as commercial structures. The proposed project will lead to the development and commercialization of a validated predictive capability based on the Peridynamic (PD) theory to enhance the performance of thick composite components under complex loading conditions while exposed to harsh environments. The pr ...

    SBIR Phase II 2015 Department of DefenseNavy
  5. Optical System for Precision Atomic Clocks and Stable Oscillators

    SBC: N.P. PHOTONICS, INC.            Topic: AF141126

    ABSTRACT:Ultra-stable and accurate frequency and timing devices such as atomic clocks are essential for modern communication, navigation, surveillance, and missile guidance systems. There are many atomic oscillators such as neutral calcium and neutral ytterbium that produce clock signal in optical domain. However, these optical standards are expensive and not widely available. The phase stabilized ...

    SBIR Phase II 2015 Department of DefenseAir Force
  6. Green Catalyst-free Electric Monopropellant (GEM) for Insensitive Munitions (IM) Compliance

    SBC: Digital Solid State Propulsion, Inc            Topic: MDA13032

    Continuously advancing ballistic missile threats require an interceptor missile system which has greater basing flexibility and highly advanced performance in terms of burnout velocity and Divert and Attitude Control (DACS). Liquid systems are the ideal candidate to fit this role because of higher performance than solids; however, they tend to be a significant safety risk due to toxicity, corrosi ...

    SBIR Phase II 2015 Department of DefenseMissile Defense Agency
  7. 100W Mode-locked Green Laser for GaAs Photoemission Guns

    SBC: ADVALUE PHOTONICS INC            Topic: 38e

    To address the DoE need for a high-power laser source used for synchronous photoinjection of GaAs photoemission guns, AdValue Photonics proposes to develop a radio-frequency synchronized 100W mode-locked green laser source at a GHz rate. Previously-demonstrated GHz-rate modelocked solid-state/fiber lasers suffer from a reliability issue due to the use of fragile free-space bulk optics for their la ...

    SBIR Phase II 2015 Department of Energy
  8. Controllable and Adaptable Lateral Support System

    SBC: ADVANCED MATERIALS & DEVICES            Topic: N132143

    This SBIR Phase II effort will be aimed towards designing and testing a controllable missile lateral support system (LSS) that reacts automatically to shock and vibration inputs. A sub-scale lateral support system (LSS) assembly consisting of six jacking feet and a full-scale LSS jacking feet unit will be fabricated and tested. The electromechanically actuated LSS will offer controllable damping t ...

    SBIR Phase II 2015 Department of DefenseNavy
  9. Modular, Low Cost Fixture for Evaluating OML Treatments for Stress-Strain Loading During Environmental Conditioning

    SBC: Material and Process Solutions, LLC            Topic: AF141167

    ABSTRACT:Material and Process Solutions LLC will build a modular, outer mold line (OML) gap fatigue test fixture that can be used to predict the overall lifetime of a complete OML stack-ups (gap filler and coatings) used on aircraft.We will evaluate two complete OML stack-ups at three conditions: no exposure, and both sequential and concurrent environmental conditioning and fatigue testing.The mod ...

    SBIR Phase II 2015 Department of DefenseAir Force
  10. Linearized FUN3D for Rapid Aeroelastic and Aeroservoelastic Design and Analysis

    SBC: ZONA TECHNOLOGY INC            Topic: A301

    In Phase I, a prototypical FUN3D-based ZONA Euler Unsteady Solver (FunZEUS) was developed to generate the Generalized Aerodynamic Forces (GAFs) due to structural modes, control surface kinematic modes, and gust excitation using a frequency-domain linearized unstructured Euler solver based on the Navier-Stokes solution of FUN3D as the steady background flow. These GAFs can lead to a state-space eq ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government