List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Efficient cFS-based On-board Lamberts Solution for DSMs

    SBC: Advanced Space LLC            Topic: T11

    Distributed Spacecraft Missions (DSM) architectures provide unique scientific and programmatic benefits including multipoint in-situ measurements, multi-angle viewpoints, and improved understanding of the connections between separately measured phenomena and their time variations. However, these missions impose significant operational demands on ground tracking resources and mission operators alik ...

    STTR Phase II 2019 National Aeronautics and Space Administration
  2. SBIR Phase II: Stateless- Taking from the Lab to a Production Environment

    SBC: Stateless Inc            Topic: IT

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project results from the fact that it builds on the trend to make IT infrastructure consumable as a service and unlocks this potential for network functions. In deploying the Stateless Network Functions as a Service solution, cloud providers, enterprises, and internet service providers are able to la ...

    SBIR Phase II 2019 National Science Foundation
  3. SBIR Phase II: Novel Dynamic Elastomer System For Additive Manufacturing

    SBC: Chromatic 3D Materials Inc.            Topic: MN

    This SBIR Phase II project will create a material, printer, and software system for printing a novel set of flexible, durable materials for additive manufacturing technologies. Additive manufacturing, or 3D Printing, is a rapidly growing $7bn industry, which enables small and medium enterprises to competitively manufacture new and innovative products. It is a key to strengthening the US manufactur ...

    SBIR Phase II 2019 National Science Foundation
  4. SBIR Phase II: Novel Dynamic Elastomer System For Additive Manufacturing

    SBC: Chromatic 3D Materials Inc.            Topic: MN

    This SBIR Phase II project will create a material, printer, and software system for printing a novel set of flexible, durable materials for additive manufacturing technologies. Additive manufacturing, or 3D Printing, is a rapidly growing $7bn industry, which enables small and medium enterprises to competitively manufacture new and innovative products. It is a key to strengthening the US manufactur ...

    SBIR Phase II 2019 National Science Foundation
  5. Development of a Stochastic Multi-dimensional Fire Modeling and Simulation Software Package

    SBC: ADA Technologies, Inc.            Topic: A17073

    Fire can act extremely quickly in military shelters. Improving fire safety begins with understanding the fire dynamics associated with each system. All current shelters are evaluated for fire safety on a component basis only; there are no specifications for how the overall system design relates to generation of flame, heat, and smoke. As such, the Army needs a three-dimensional, reliable and valid ...

    SBIR Phase II 2019 Department of DefenseArmy
  6. UHF L-band Transmitter Receiver Antenna (ULTRA)

    SBC: First RF Corporation            Topic: A17040

    The Department of Defense depends on multiple systems to establish and update position information of our forces on the battlefield. However, the current interfacing capability for position location information (PLI) systems is limited to a select few service providers. By adding flexibility to the RF media interface for these systems, new levels of connectedness and reliability can be achieved, p ...

    SBIR Phase II 2019 Department of DefenseArmy
  7. High Energy Density, Long Cycle Life and Safe Li-S Battery

    SBC: ADA Technologies, Inc.            Topic: A17050

    Built from a highly successful Phase I (Base) proof-of-concept technology demonstration, ADA Technologies Inc. (ADA) proposes to further develop, optimize and demonstrate our high energy density, long cycle life and safe Lithium-Sulfur (Li-S) battery technology to address the US Army (Army) needs for higher energy density, wide operating temperature, and safe soldier portable energy storage device ...

    SBIR Phase II 2019 Department of DefenseArmy
  8. Plasma Simulation Code Encompassing Single-Fluid through Two-Fluid Models

    SBC: TECH-X CORPORATION            Topic: AF11BT08

    Modeling and simulation play a critical role in the design and evaluation of high power microwave (HPM) devices. However, many of the most recent simulation methods have yet to be adopted by Navy scientists in their design process, in part because these methods need additional improvements and need to be shown to work on problems of interest to the Navy. Improvements to Magneto-hydrodynamics (MHD) ...

    SBIR Phase II 2018 Department of DefenseNavy
  9. SBIR Phase II: Engineering novel pigmented cyanobacteria for the use in the ink, printing and colorant industries

    SBC: LIVING INK TECHNOLOGIES LLC            Topic: BT

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project is developing a safe and sustainable ink for the global ink industry. Approximately nine billion pounds of ink is produced annually around the world. Currently, ink is predominantly made of petroleum or inorganic chemicals mined from the earth. For example, carbon black is commonly used in tr ...

    SBIR Phase II 2018 National Science Foundation
  10. SBIR Phase II: Novel Defibrillator

    SBC: Medicool Technologies            Topic: BM

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project lies in its potential to develop a new mechanism for painlessly terminating atrial fibrillation. Cardiac arrhythmia is one of the leading causes of death and debilitation. A common means of terminating harmful rhythms is delivering a shock via an external or implantable defibrillator. The pai ...

    SBIR Phase II 2018 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government