List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Instant k-Space Tomography for Spatial-Spectral Monitoring

    SBC: PHASE SENSITIVE INNOVATIONS            Topic: AF17AT013

    The Army is frequently forced to operate in hostile climates. Heavy fog, rain, snow, and dust storms can inhibit the performance of tracking technologies such as mid-wave infrared cameras. In such conditions, Army early warning systems are blinded and put personnel and assets at risk.There is a specific need for a degraded visual environment (DVE) penetrative target tracking solution.Radio frequen ...

    STTR Phase II 2018 Department of DefenseAir Force
  2. Impact-Resistant, Damage-Tolerant Composites with STF Energy Absorbing Layers

    SBC: STF Technologies LLC            Topic: H4

    We propose an innovative hybrid composite material containing shear thickening fluid (STF) Energy Absorbing Layers (SEALs) that provides superior impact protection and novel, self-healing functionality to prevent leakage after impact.  The proposed innovation directly addresses the need for thin, lightweight, impact-resistant composite materials that can be fabricated in complex geometries fo ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  3. Design and Process Development of Thin-Ply Composites

    SBC: Composites Automation LLC            Topic: T12

    Composites Automation LLC (CA), our academic partner University of Delaware – Center for Composite Materials (UD-CCM) are teaming up in this STTR Phase II project to evaluate automated tape placement (ATP) processing of thin-ply composites, including material and process development, creation of a modeling foundation capturing thin-ply placement, test panel fabrication and mechanical perform ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  4. Novel SCD1 inhibitors for treatment of cancer

    SBC: MODULATION THERAPEUTICS, INC.            Topic: 102

    Project Summary Metabolic reprogramming plays a critical role in carcinogenesisin part due its ability to promote immune suppressive properties within tumorsHoweverit is unclear whether inhibition of fatty acid metabolism in tumors affects their immunogenicityHerewe show for the first time that inhibition of stearoyl CoA desaturaseSCDthe rate limiting enzyme involved in fatty acid synthesis conver ...

    STTR Phase II 2018 Department of Health and Human Services
  5. Development of PEGylated MTI-101 for the treatment of relapsed Myeloma

    SBC: MODULATION THERAPEUTICS, INC.            Topic: 102

    ABSTRACTModulation Therapeutics is developing a first in class cyclic peptide coined MTIfor the treatment of multiple myelomaThe company currently has a license for the parent molecule which has been awarded a patent covering the intellectual property for both composition of matter and use in cancer in the US and EuropeModulation Therapeutics is now poised to further advance this class of compound ...

    SBIR Phase II 2018 Department of Health and Human Services
  6. Wafer-Level Electronic-Photonic Co-Packaging

    SBC: PHASE SENSITIVE INNOVATIONS            Topic: AF16AT01

    In phase II work, we will collaborate with Prof. Stefan Preble in RIT and continue to develop large scale hybrid integration and packaging techniques for key active photonic components such as lithium niobate on insulator (LNOI) modulators and modified uni-traveling (MUTC) photodiodes. We will demonstrate a low V, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide usin ...

    STTR Phase II 2018 Department of DefenseAir Force
  7. Industrial Crystallization Facility for Nonlinear Optical Materials

    SBC: Made In Space, Inc.            Topic: H8

    Made In Space, Inc. (MIS) proposes the development, to a critical design level, of an Industrial Crystal Facility (ICF) for microgravity product manufacturing and applied research. The ICF is focused on advanced materials engineering, rather than biomedical research, and expands utilization of the ISS into new product areas not previously investigated. Intended applications include nonlinear optic ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  8. Enhanced Recovery of Pharmaceutical Solvent driven by EPA Initiative

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: NIEHS

    Summary Enhanced Recovery of Pharmaceutical Solvent driven by EPA InitiativeThe United States Environmental Protection AgencyEPAis establishing new safeguards for hazardous secondary materials with objectives to promote the economicenvironmentaland public health benefits of recycling wasteswith an emphasis on several industrial sectorsincluding the pharmaceutical industryOn averagepharmaceutical m ...

    SBIR Phase II 2018 Department of Health and Human Services
  9. The Vulcan Advanced Hybrid Manufacturing System

    SBC: Made In Space, Inc.            Topic: H7

    Building on previously funded work by NASA and DARPA, its internal research and development projects, and manufacturing activities occurring on the International Space Station (ISS), Made In Space, Inc. (MIS) is developing the VULCAN system to address NASA’s requirement to produce high-strength, high-precision polymer and metallic components on-orbit with comparable quality to commercially-a ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  10. Enhanced Oxidative Dehydrogenation of Ethane with Facilitated Transport Membranes for Low Cost Production of Ethylene

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: 17a

    Ethylene demand is expected to increase by 50% domestically and worldwide over the next 5 years with a scramble to increase supply via expansion or grass root facilities. US capacity will remain at about 20% of the world’s supply and exceed 100 BPPY. To meet this challenge, US-DOE has invented a mixed metal oxide catalyst, M1 for the oxidative dehydrogenation of ethane (C2-ODH) to ethylene at hi ...

    SBIR Phase II 2018 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government